Skip to main content
Log in

Synthesis of indium tin oxide nano-polycrystalline powders by ultrasonic spray pyrolysis

  • Published:
Rare Metals Aims and scope Submit manuscript

Abstract

Indium tin oxide (ITO) nano-polycrystalline powders were prepared by ultrasonic spray pyrolysis (USP) method using a precursor solution of indium and tin chlorides in a simple one-step process without any post-heat treatment, additives and other complex operations. The morphology and crystal structure of ITO powders were studied by thermogravimetric and differential thermal analysis (TG–DTA), X-ray diffraction (XRD), energy-dispersive spectrometer (EDS), scanning electron microscopy (SEM), laser particle size analyzer (LPSA), transmission electron microscope (TEM), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), respectively. The results indicate that pure cubic ITO solid solution could be obtained at and above the pyrolysis temperature of 600 °C. Through adjusting the size of atomized precursor droplets, the particles with regular spherical shape and smooth surface are also obtained. The spherical particles have a narrow size distribution with a dominant diameter size in the range of 0.52–1.28 μm, and the average value is 1.01 μm. The clear lattice fringes in HRTEM image confirm a polycrystalline structure of ITO particles with the growth direction along (222) direction.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Edwards PP, Porch A, Jones MO, Morgan DV, Perks RM. Basic materials physics of transparent conducting oxides. Dalton Trans. 2004;19:2995.

    Article  Google Scholar 

  2. Granqvist CG, Hultaker A. Transparent and conducting ITO films: new developments and applications. Thin Solid Films. 2002;411(1):1.

    Article  CAS  Google Scholar 

  3. Hambreg I, Granquist CG. Evaporated Sn-doped In2O3 films: basic optical properties and applications to energy-efficient windows. J Appl Phys. 1986;60(11):123.

    Article  Google Scholar 

  4. Sun Z, He J, Kumbhar A, Fang J. Nonaqueous synthesis and photoluminescence of ITO nanoparticles. Langmuir. 2010;26(6):4246.

    Article  CAS  Google Scholar 

  5. Joshi RN, Singh VP, McClure JC. Characteristics of indium tin oxide films deposited by r.f. magnetron sputtering. Thin Solid Films. 1995;257(1):255.

    Article  Google Scholar 

  6. Sujatha C, Rao GM, Uthanna S. Characteristics of indium tin oxide films deposited by bias magnetron sputtering. Mater Sci Eng B. 2002;94(1):106.

    Article  Google Scholar 

  7. Zhou Y, Kelly PJ. The properties of tin-doped indium oxide films prepared by pulsed magnetron sputtering from powder targets. Thin Solid Films. 2004;469–470:18.

    Article  Google Scholar 

  8. Kim KY, Park SB. Preparation and property control of nano-sized indium tin oxide particle. Mater Chem Phys. 2004;86(1):210.

    Article  CAS  Google Scholar 

  9. Kim BC, Lee JH, Kim JJ, Ikegami T. Rapid rate sintering of nanocrystalline indium tin oxide ceramics: particle size effect. Mater Lett. 2002;52(1–2):114.

    Article  CAS  Google Scholar 

  10. Yoshiro Y, Atsushi N. Manufacturing method of ITO powder with tin dissolved in indium oxide, and manufacturing method of ITO target. US Patent; US6929772. 2005.

  11. Senthilkumar V, Senthil K, Vickraman P. Microstructural electrical and optical properties of indium tin oxide(ITO) nanoparticles synthesized by co-precipitation method. Mater Res Bull. 2012;47(4):1051.

    Article  CAS  Google Scholar 

  12. Li XH, Xu XJ, Yin X, Li CZ, Zhang J. A sol–gel method to synthesize indium tin oxide nanoparticles. Particaology. 2011;9(5):471.

    Article  Google Scholar 

  13. Devi PS, Chatterjce M, Ganguli D. Indium tin oxide nano-particles through an emulsion techniques. Mater Lett. 2002;55(4):205.

    Article  Google Scholar 

  14. Lu JF, Minami K, Takami S, Shibata M, Kaneko Y, Adschiri T. Supercritical hydrothermal synthesis and in situ organic modification of indium tin oxide nanoparticles using continuous flow reaction system. Appl Mater Interfaces. 2012;4(1):351.

    Article  CAS  Google Scholar 

  15. Lee JS, Choi SC. Solvent effect on synthesis of indium tin oxide nano-powders by a solvothermal process. J Eur Ceram Soc. 2005;25(14):3307.

    Article  CAS  Google Scholar 

  16. Rajesh N, Kannan JC, Krishnakumar T, Leonardim SG, Neri G. Sensing behavior to ethanol of tin oxide nanoparticles prepared by microwave synthesis with different irradiation time. Sens Actuators, B. 2014;194:96.

    Article  CAS  Google Scholar 

  17. Celso G, Elisabeth D. Synthesis and sintering of Gd-doped CeO2 nanopowders prepared by ultrasonic spray pyrolysis. J Eur Ceram Soc. 2013;33(4):769.

    Article  Google Scholar 

  18. Nemade KR, Waghuley SA. Synthesis of CeO2 nanoparticles using flame-assisted spray pyrolysis and solid state diffusion routes. Rare Met. 2015;34(1):6.

    Article  CAS  Google Scholar 

  19. Lee SM, Choi SH, Lee JK, Kang YC. Electrochemical properties of graphene-MnO composite and hollow-structured MnO powders prepared by a simple one-pot spray pyrolysis process. Electrochim Acta. 2014;132:441.

    Article  CAS  Google Scholar 

  20. Janackovic D, Jokanovic V, Gvozdenovic LK, Uskokovic D. Synthesis of mullite nanostructured spherical powder by ultrasonic spray pyrolysis. Nanostruct Mater. 1998;10(3):341.

    Article  CAS  Google Scholar 

  21. Dugandžić IM, Jovanović DJ, Mančić LT, Milošević OB, Ahrenkiel SP, Šaponjić ZV, Nedeljković JM. Ultrasonic spray pyrolysis of surface modified TiO2 nanoparticles with dopamine. Mater Chem Phys. 2013;143(1):233.

    Article  Google Scholar 

  22. Ebin BE, Gürmen S, Arslan C, Lindbergh G. Electrochemical properties of nanocrystalline LiFexMn2−xO4(x = 0.2–1.0) cathode particles prepared by ultrasonic spray pyrolysis method. Electrochim Acta. 2012;76:368.

    Article  CAS  Google Scholar 

  23. Garza M, Hernández T, Colás R, Cόmez I. Deposition of gold nanoparticles on glass substrate by ultrasonic spray pyrolysis. Mat Sci Eng B. 2010;174(1–3):9.

    Article  Google Scholar 

  24. Gurmen S, Guven A, Ebin B, Stopić S, Friedrich B. Synthesis of nano-crystalline spherical cobalt–iron(Co–Fe) alloy particles by ultrasonic spray pyrolysis and hydrogen reduction. J Alloys Compd. 2009;481(1–2):600.

    Article  CAS  Google Scholar 

  25. Wang WJ, Ng TW, Ho WK, Huang JH, Liang SJ, An GY, Yu JC, Wong PK. CdIn2S4 microsphere as an efficient visible-light driven photocatalyst for bacterial inactivation: synthesis, characterizations and photocatalytic inactivation mechanisms. Appl Catal B Environ. 2013;129:482.

    Article  CAS  Google Scholar 

  26. Kang YC, Lenggoro IW, Park SB, Okuyama KK. YAG: Ce phosphor particles prepared by ultrasonic spray pyrolysis. Mater Res Bull. 2000;35(5):789.

    Article  CAS  Google Scholar 

  27. García-Hipólito M, Hernández-pérez CD, Alvarez-Fregoso O, Martinez E, Guzmán-Mendoza J, Falcony C. Characterization of europium doped zinc aluminate luminescent coatings synthesized by ultrasonic spray pyrolysis process. Opt Mater. 2003;22(4):345.

    Article  Google Scholar 

  28. Jokić B, Drmanić S, Radetic T, Krstić J, Petrović R, Orlović A, Janaćković D. Synthesis of submicron carbon spheres by the ultrasonic spray pyrolysis method. Mater Lett. 2010;64(20):2173.

    Article  Google Scholar 

  29. Lozada EV, Torchynska TV, Casas Espinola JL, Millan BP. Emission of ZnO: Ag nanorods obtained by ultrasonic spray pyrolysis. Phys B. 2014;453(4):111.

    Article  Google Scholar 

  30. Htay MT, Honshimoto Y, Momose N, Ito K. Position-selective growth of ZnO nanowires by ultrasonic spray pyrolysis. J Cryst Growth. 2009;311(20):4499.

    Article  Google Scholar 

  31. Messing GL, Zhang SC, Jayanthi GV. Ceramic powder synthesis by spray pyrolysis. J Am Ceram Soc. 1993;76(11):2707.

    Article  CAS  Google Scholar 

  32. Klug HP, Alexender LE. X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials. New York: Wiley; 1974. 656.

    Google Scholar 

  33. Fukada Y, Nicholson PS. The role of Si-O species in the colloidal stability of silicon-containing ceramic powders. J Eur Ceram Soc. 2004;24(1):17.

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This study was financially supported by the National Natural Science Foundation of China (Nos. 51264015 and 51404116) and Yunnan Provincial Science and Technology Innovation Talents Scheme—Technological Leading Talent (No. 2013HA002).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Sheng-Hui Guo.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, LH., Guo, SH., Zhou, CJ. et al. Synthesis of indium tin oxide nano-polycrystalline powders by ultrasonic spray pyrolysis. Rare Met. 41, 3579–3584 (2022). https://doi.org/10.1007/s12598-016-0730-7

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12598-016-0730-7

Keywords

Navigation