Abstract
The OI-LED device was fabricated using a combination of organic and inorganic semiconductors in multiple layers. This resulted has been improved generation of electroluminescence by incorporating carbon nanoparticles (with a size range of 20–40 nm) into materials such as poly (3, 4, -ethylene dioxythiophene) / polystyrene sulfonic acid (PEDOT: PSS), poly [(9, 9 – dioctylfluoreny l-2, 7- diyl)–co-(4, 4′-(N-(4-sec butylphenyl) diphenylamine)] (TFB and Tris (8-quinolinolato) aluminum(III) (Alq3). The fabrication process involved the use of spin coating technique and phase segregation method, which yielded thin film sample: (ITO/PEDOT: PSS/TFB/CNP/Alq3/AL). The electroluminescent properties of the OI-LED were investigated by interpreting the change resulting from applying different bias voltages 8, 9 and 10 V and the deposition of various organic layers at room temperature. The I-V curve clearly demonstrated the influence of the applied voltage on the knee voltages 1.7 V observed in sample. These characteristics enabled the OI-LED to emit a wide spectrum of light with wavelengths from 300 to 800 nm. It was calculated and studied color spaces by the Commission Internationale de l’Éclairage (Cie) 1931 system, and the correlated color temperature (CCT) of the device was found to range from 2000 to 3500 K.
Similar content being viewed by others
Data availability
Data sharing is not applicable to this article as no datasets were created or analyzed during the current study.
References
Wolfgang, Brütting, Introduction to the physics of organic semiconductors, Physics of organic semiconductors, 1–14 (2005)
Lakshmanan, S.C.G. Kiruba, Daniel, Engineered nanomaterials for organic light-emitting diodes (OLEDs), Handbook of nanomaterials for industrial applications, 312–323 (2018)
B. Lüssem, M. Riede, K. Leo, Doping of organic semiconductors. Phys. Status Solidi A 210(1), 9–43 (2013)
H. He, Applications in OLED and QLED, Solution Processed Metal Oxide Thin films for Electronic Applications, 141–154 (2020)
P.-A. Will, S. Reineke, Organic light-emitting Diodes, Handbook of Organic Materials for Electronic and Photonic Devices (Woodhead Publishing, 2019), pp. 695–726
M.C. Gather, A. Köhnen, K. Meerholz, White organic light-emitting diodes. Adv. Mater. 23(2), 233–248 (2011)
B. Geffroy, P.L. Roy, C. Prat, Organic light-emitting diode (OLED) technology: materials, devices and display technologies. Polym. Int. 55(6), 572–582 (2006)
Y. Wang, A. Hu, Carbon quantum dots: synthesis, properties and applications. J. Mater. Chem. C 34, 6921–6939 (2014)
A.H. Abd, O.A. Ibrahim, Synthesis of Carbon Quantum dot by Electro-Chemical Method and Studying Optical Electrical and Structural properties. Chem. Methodol. 6(11), 823–830 (2022)
A.H. Mohammed, A.N. Naje, R.K. Ibrahim, Photoconductive detector based on Graphene Doping with Silver Nanoparticles. Iraqi J. Sci. 63(12), 5218–5231 (2022)
P. Li, Z.-H. Lu, Interface Engineering in Organic electronics: Energy-Level Alignment and Charge Transport. Small Sci. 1(1), 2000015 (2021)
G.M. Farinola, R. Ragni, Electroluminescent materials for white organic light emitting diodes. Chem. Soc. Rev. 40, 3467–3482 (2011)
A.R. Rodrigues, W. Novais, Renzi, Neusmar Junior Artico Cordeiro, Edson Laureto, Ivan Frederico Lupiano Dias, and José Leonil Duarte, Study of energy transfer in polymer blends of TFB: P3HT, Semina. Exact Technological Sci. 38(1), 91–100 (2017)
V.A. Dediu, L.E. Hueso, I. Bergenti, C. Taliani, Spin routes in organic semiconductors. Nat. Mater. 8(9), 707–716 (2009)
H.R. Mohammed, O.A. Ibrahim, Electroluminescence of light-emitting Organic Semiconductor/Europium Oxide Nanoparticle Hybrid Junction. Iraqi J. Sci. 61(8), 1952–1959 (2020)
H.R. Mohammed, O.A. Ibrahim, Preparation of Hybrid Junction Light emitting device from Cadmium Sulphite Quantum dot/poly-TPD Junction, University of Thi-Qar. J. Sci. 8(2), 100–103 (2021)
H.R. Mohammed, Fabrication of electroluminescence device for PEDOT: PSS/ploy TPD/Eu2O3 nanoparticles junction. Iraqi J. Phys. 17(43), 33–40 (2019)
A.M. Kadim, O.A. Ibrahim, W.R. Saleh, Electroluminescence devices from quantum dots with TPD polymer white light generation. J. Nano Res. 48, 104–113 (2017)
L.A. Essa, R.K. Jamal, Studying the structural and optical properties of carbon quantum dots prepared by electro–chemical method. J. Opt., https://doi.org/10.1007/s12596-023-01328-1
T. Hoshi, K.-I. Kumagai, K. Inoue, S. Enomoto, Y. Nobe, M. Kobayashi, Electronic absorption and emission spectra of Alq3 in solution with special attention to a delayed fluorescence. J. Lumin. 128(8), 1353–1358 (2008)
Z. Wang, N. Jiang, M. Liu, R. Zhang, F. Huang, D. Chen, Bright Electroluminescent White-Light‐emitting diodes based on Carbon dots with tunable correlated color temperature enabled by aggregation. Small. 17(52), 2104551 (2021)
M. Auer-Berger, R. Trattnig, T. Qin, R. Schlesinger, M.V. Nardi, G. Ligorio, C. Christodoulou, N. Koch, M. Baumgarten, K. Mullen, All-solution-processed multilayer polymer/dendrimer light emitting diodes. Org. Electron. 35, 164–170 (2016)
J.H. Lee, C.-H. Chen, P.H. Lee, H.Y. Lin, M. –, K. Leung, T.L. Chiu, C. –, F. Lin, Blue organic light-emitting diodes: current status, challenges, and future outlook. J. Mater. Chem. C 7(20), 5874–5888 (2019)
P. Xiao, T. Dong, J. Xie, D. Luo, J. Yuan, B. Liu, Emergence of white organic light-emitting diodes based on thermally activated delayed fluorescence. Appl. Sci. 8(2), 299 (2018)
O.A. Ibrahim, A.M. Kadim, W.R. Saleh, White Light Generation from Electroluminescence Devices Using TPD: PMMA/QDs/Alq3, Nano Hybrids and Composites, 15, 10–20 (2017)
C.S. McCamy, Correlated color temperature as an explicit function of chromaticity coordinates. Color. Res. Application. 17(2), 142–144 (1992)
A.N. Naje, O.A. Ibrahim, E.T. Abdullah, Blue Organic-Inorganic Light Emitting Diode based on Electroluminescence CdS nanoparticle. Iraqi J. Sci. 64(12), 6277–6284 (2023)
Funding
The authors have not disclosed any funding.
Author information
Authors and Affiliations
Contributions
Each co-author has made unique contributions to the work. The author HRM prepared the thin films and contributed to writing the article draft and wrote the program for optical properties and contributed to the analysis of the results. As the author ANN, he supervised the work and reviewed the article draft.
Corresponding author
Ethics declarations
Ethical approval
The authors would like to declare that they do not have any conflict of interests.
Competing interests
The authors have not disclosed any competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mohammed, H.R., Naje, A.N. Light emitting diodes based on carbon nanoparticles and Alq3. J Opt (2024). https://doi.org/10.1007/s12596-024-01890-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12596-024-01890-2