Abstract
In the present study, the first-order reliability method (FORM) is applied to evaluate the failure of soil deposits during seismic excitation for the city of Patna, India. Patna is emerging as one of the metro cities and the rapid infrastructure development in the city with high pace construction of road and metro services along with several smart city projects have led to immense growth in civil engineering structures. Therefore, liquefaction assessment of Patna is an important subject due to the geographical and seismic location of the city. A detailed comparative study has been performed between first-order second moment (FOSM) and advanced first-order second-moment (AFOSM) reliability methods to determine the most suitable method to evaluate the potential risk of liquefaction for Patna city. Reliability index (β) values obtained from AFOSM analysis are in true accordance with the deterministic approach and therefore can be considered as an appropriate tool for reliability analysis for this city. The analysis establishes that the city of Patna exhibits high possibilities of liquefaction failure during high-intensity earthquakes i.e. Mw = 6.5. Also, a concept of a predictive computational model developed by the hybridization of ANN and GWO algorithms to determine β value using geotechnical and seismic parameters has been proposed. The high precision and error-free performance of the ANN-GWO model provides a powerful computational tool to assist the prediction of β. The results of the study could be used to comprehend the potential risk against liquefaction and provide a novel and insightful concept of risk assessment for safe and economic construction practices.
Similar content being viewed by others
References
Andrews, D.C. and Martin, G. R. (2000) Criteria for Liquefaction of Silty Soils. 12th World Conf. on Earthquake Engineering, pp.1–8.
Beyzaei, C.Z., Bray, J.D., Cubrinovski, M., Riemer, M. and Stringer, M. (2018a) Laboratory-based characterization of shallow silty soils in southwest Christchurch. Soil Dynamics and Earthquake Engineering, v.110, pp.93–109. doi:https://doi.org/10.1016/j.soildyn.2018.01.046
Beyzaei, C.Z., Bray, J.D., van Ballegooy, S., Cubrinovski, M. and Bastin, S. (2018b) Depositional environment effects on observed liquefaction performance in silt swamps during the Canterbury earthquake sequence. Soil Dynamics and Earthquake Engineering, v.107, pp.303–321. doi:https://doi.org/10.1016/j.soildyn.2018.01.035
Boulanger, R.W. and Idriss, I.M. (2006) Liquefaction Susceptibility Criteria for Silts and Clays. Jour. Geotech. Geoenviron. Engg., v.132(11), pp.1413–1426. doi:https://doi.org/10.1061/(asce)1090-0241(2006)132:11(1413)
Bray, J.D., Sancio, R.B., Riemer, M.F. and Durgunoglu, T. (2004) Liquefaction susceptibility of fine-grained soils. Proceedings of the 11th International Conference on Soil Dynamics and Earthquake Engineering and 3rd International Conference on Earthquake Geotechnical Engineering, pp.655–662.
Bray, Jonathan D. and Sancio, R.B. (2006) Assessment of the liquefaction susceptibility of fine-grained soils. Jour. Geotech. Geoenviron. Engg., v.132(9), pp.1165–1177. doi:https://doi.org/10.1061/(ASCE)1090-0241(2006)132:9(1165)
Cao, Z., Wang, Y. and Li, D. (2016) Probabilistic approaches for geotechnical site characterization and slope stability analysis. In Probabilistic Approaches for Geotechnical Site Characterization and Slope Stability Analysis. doi:https://doi.org/10.1007/978-3-662-52914-0
Chattaraj, R. and Sengupta, A. (2016) Liquefaction potential and strain dependent dynamic properties of Kasai River sand. Soil Dynam. Earthquake Engg., v.90, pp.467–475.
Choobbasti, A.J., Naghizaderokni, M. and Naghizaderokni, M. (2015) Reliability analysis of soil liquefaction based on standard penetration: a case study in Babol city. Icsce. http://www.sciei.org
Dehghanbanadaki, A., Khari, M., Amiri, S.T. and Armaghani, D.J. (2021) Estimation of ultimate bearing capacity of driven piles in c-φ soil using MLP-GWO and ANFIS-GWO models: a comparative study. Soft Computing, v.25(5), pp.4103–4119. doi:https://doi.org/10.1007/s00500-020-05435-0
Deng, S., Wang, X., Zhu, Y., Lv, F. and Wang, J. (2019) Hybrid Grey Wolf Optimization Algorithm-Based Support Vector Machine for Groutability Prediction of Fractured Rock Mass. Jour. Computing in Civil Engg., v.33(2), 4018065.
Ditlevsen, O. and Bjerager, P. (1986) Methods of structural systems reliability. Structural Safety, v.3(3–4), pp.195–229.
Ditlevsen, O. and Bjerager, P. (1989) Plastic reliability analysis by directional simulation. Jour. Engg. Mech., v.115(6), pp.1347–1362.
el Amin Bourouis, M., Zadjaoui, A. and Djedid, A. (2020) Contribution of two artificial intelligence techniques in predicting the secondary compression index of fine-grained soils. Innovative Infrastructure Solutions, v.5(3), pp.1–11.
Ganji, A. and Jowkarshorijeh, L. (2012) Advance first order second moment (AFOSM) method for single reservoir operation reliability analysis: A case study. Stochastic Environmental Research and Risk Assessment, v.26(1), pp.33–42. doi:https://doi.org/10.1007/s00477-011-0517-1
Ghani, S. and Kumari, S. (2021a) Effect of Plasticity Index on Liquefaction Behavior of Silty Clay. In: Lecture Notes in Civil Engineering: Vol. 119 LNCE (pp. 289–298). doi:https://doi.org/10.1007/978-981-33-4001-5_26
Ghani, S. and Kumari, S. (2021b) Insight into the Effect of Fine Content on Liquefaction Behavior of Soil. Geotech. Geol. Engg., v.39(1). doi:https://doi.org/10.1007/s10706-020-01491-3
Ghani, S. and Kumari, S. (2021c) Liquefaction study of fine-grained soil using computational model. Innovative Infrastructure Solutions, v.6(2). doi:https://doi.org/10.1007/s41062-020-00426-4
Ghani, S. and Kumari, S. (2021d) Liquefaction susceptibility of high seismic region of Bihar considering fine content. In: Basics of Computational Geophysics (pp. 105–120). doi:https://doi.org/10.1016/b978-0-12-820513-6.00012-6
Ghani, S. and Kumari, S. (2021e). Probabilistic Study of Liquefaction Response of Fine-Grained Soil Using Multi-Linear Regression Model. Jour. Instit. Engineers (India): Series A, v.102(3), pp.783–803. doi:https://doi.org/10.1007/s40030-021-00555-8
Ghani, S., Kumari, S. and Bardhan, A. (2021) A novel liquefaction study for fine-grained soil using PCA-based hybrid soft computing models. Sadhana, v.46(3), pp.1–17. doi:https://doi.org/10.1007/s12046-021-01640-1
Ghannadi, P., Kourehli, S.S., Noori, M. and Altabey, W.A. (2020) Efficiency of grey wolf optimization algorithm for damage detection of skeletal structures via expanded mode shapes. Advan. Struct. Engg., v.23(13), pp.2850–2865.
Gratchev, I. B., Sassa, K. and Fukuoka, H. (2006) How reliable is the plasticity index for estimating the liquefaction potential of clayey sands? Jour. Geotech. Geoenviron. Engg., v.132(1), pp.124–127. doi:https://doi.org/10.1061/(ASCE)1090-0241(2006)132:1(124)
Harichane, Z., Erken, A., Ghrici, M. and Chateauneuf, A. (2018) Case Study of Reliability Liquefaction Analysis Based on Standard Penetration Test: Sakarya City (Turkey). Conference of the Arabian Jour. Geosci., pp.213–215.
Harr, M.E. (1984) Reliability-based design in civil engineering (Vol. 20). Department of Civil Engineering, School of Engineering, North Carolina State.
Himanshu, N., Kumar, V., Burman, A., Maity, D. and Gordan, B. (2020) Grey wolf optimization approach for searching critical failure surface in soil slopes. Engineering with Computers, pp.1–14.
Idriss, I.M. and Boulanger, R.W. (2006) Semi-empirical procedures for evaluating liquefaction potential during earthquakes. Soil Dynamics and Earthquake Engineering, v.26(2–4 Spec. iss.), pp.115–130. doi:https://doi.org/10.1016/j.soildyn.2004.11.023
Jha, S.K. and Suzuki, K. (2009) Reliability analysis of soil liquefaction based on standard penetration test. Computers and Geotechnics, v.36(4), pp.589–596. doi:https://doi.org/10.1016/j.compgeo.2008.10.004
Johari, A. and Behzadi, M. (2020) 3rd International Conference on Civil Engineering, A comparative study of stochastic liquefaction analysis of fine-grained soils. August, 0–9.
Juang, C.H. and Chen, C.J. (1999) Cpt-based liquefaction evaluation using artificial neural networks. Computer-Aided Civil and Infrastructure Engineering, v.14(3), pp.221–229.
Juang, C.H., Fang, S.Y. and Khor, E.H. (2006) First-Order Reliability Method for Probabilistic Liquefaction Triggering Analysis Using CPT. Jour. Geotech. Geoenviron. Engg., v.132(3), pp.337–350. doi:https://doi.org/10.1061/(asce)1090-0241(2006)132:3(337)
Juang, C.H., Li, D.K., Fang, S.Y., Liu, Z. and Khor, E.H. (2008) Simplified Procedure for Developing Joint Distribution of amax and Mw for Probabilistic Liquefaction Hazard Analysis. Jour. Geotech. Geoenviron. Engg., v.134(8), pp.1050–1058. doi:https://doi.org/10.1061/(asce)1090-0241(2008)134:8(1050)
Juang, C.H., Rosowsky, D.V. and Tang, W.H. (1999). Reliability-based method for assessing liquefaction potential of soils. Jour. Geotech. Geoenviron. Engg., v.125(8), pp.684–689. doi:https://doi.org/10.1061/(ASCE)1090-0241(1999)125:8(684)
Juang, C.H., Zhang, J., Khoshnevisan, S. and Gong, W. (2017) Probabilistic Methods for Assessing Soil Liquefaction Potential and Effect. Geotech. Spec. Publ., v.282, pp.122–145. doi:https://doi.org/10.1061/9780784480694.007
Khan, M.A., Khan, Dr. M.Z. and Mohd. Khan, B. (2016) Effect of Fines on Liquefaction Resistance in Fine Sand and Silty Sand. Int. Jour. Engg. Res. Appli., v.6(1), pp.102–106. doi:https://doi.org/10.4018/jgee.2011070105
Madsen, H.O., Krenk, S. and Lind, N.C. (2006) Methods of structural safety. Courier Corporation.
Maheshwari, B., Kale, S. and Kaynia, A. (2012) Dynamic properties of Solani sand at large strains: a parametric study. Internat. Jour. Geotech. Engg., v.6(3), pp.353–358.
Marto, A., Tan, C.S., Makhtar, A.M., Ung, S.W. and Lim, M.Y. (2015) Effect of Plasticity on Liquefaction Susceptibility of Sand-Fines Mixtures. Appl. Mech.Mater., v.773–774, pp.1407–1411. doi:https://doi.org/10.4028/www.scientific.net/amm.773-774.1407
Mijic, Z., Bray, J.D., Riemer, M.F., Rees, S.D. and Cubrinovski, M. (2021) Cyclic and monotonic simple shear testing of native Christchurch silty soil. Soil Dynamics and Earthquake Engineering, v.148, 106834.
Mirjalili, S., Mirjalili, S.M. and Lewis, A. (2014) Grey wolf optimizer. Advan. Engg. Software, v.69, pp.46–61.
Nhu, V.H., Samui, P., Kumar, D., Singh, A., Hoang, N.D. and Tien Bui, D. (2019) Advanced soft computing techniques for predicting soil compression coefficient in engineering project: a comparative study. Engineering with Computers, 0123456789. doi:https://doi.org/10.1007/s00366-019-00772-7
Phoon, K.-K. and Kulhawy, F.H. (1999) Characterization of geotechnical variability. Canadian Geotech. Jour., v.36(4), pp.612–624.
Polito, C. (2001) Scholars’ Mine Plasticity Based Liquefaction Criteria Plasticity Based Liquefaction.
Qi, C., Fourie, A., Ma, G. and Tang, X. (2018) A hybrid method for improved stability prediction in construction projects: A case study of stope hangingwall stability. Applied Soft Computing, v.71, pp.649–658.
Raja, M.N.A. and Shukla, S.K. (2021) Predicting the settlement of geosynthetic-reinforced soil foundations using evolutionary artificial intelligence technique. Geotextiles and Geomembranes, v.49(5), pp.1280–1293. doi:https://doi.org/10.1016/j.geotexmem.2021.04.007
Ray, R., Kumar, D., Samui, P., Roy, L.B., Goh, A.T.C. and Zhang, W. (2021) Application of soft computing techniques for shallow foundation reliability in geotechnical engineering. Geosci. Front., v.12(1), pp.375–383.
Seed, H.B. and Idriss, I.M. (1971) Simplified procedure for evaluating soil liquefaction potential. Jour. Soil Mech. Found. Div., v.97(9), pp.1249–1273.
Tikhamarine, Y., Malik, A., Kumar, A., Souag-Gamane, D. and Kisi, O. (2019) Estimation of monthly reference evapotranspiration using novel hybrid machine learning approaches. Hydrol. Sci. Jour., v.64(15), pp.1824–1842. https://doi.org/10.1080/02626667.2019.1678750
Umar, S. K., Samui, P. and Kumari, S. (2018a) Deterministic and Probabilistic Analysis of Liquefaction for Different Regions in Bihar. Geotech. Geol. Engg., v.36(5), pp.3311–3321. doi:https://doi.org/10.1007/s10706-018-0498-7
Umar, S. K., Samui, P. and Kumari, S. (2018b) Reliability analysis of liquefaction for some regions of Bihar. Internat. Jour. Geotech. Earthquake Engg., v.9(2), pp.23–37. doi:https://doi.org/10.4018/IJGEE.2018070102
Uzlu, E. (2021) Estimates of greenhouse gas emission in Turkey with grey wolf optimizer algorithm-optimized artificial neural networks. Neural Computing and Applications, v.33(20), pp.13567–13585. https://doi.org/10.1007/s00521-021-05980-1
Wang, W. (1979) Some findings in soil liquefaction. Earthquake Engineering Department, Water Conservancy and Hydroelectric Power.
Wang, Y., Tang, H., Wen, T. and Ma, J. (2019) A hybrid intelligent approach for constructing landslide displacement prediction intervals. Applied Soft Computing, v.81, 105506.
Zhang, P., Yin, Z.-Y., Jin, Y.-F. and Chan, T. H. T. (2020) A novel hybrid surrogate intelligent model for creep index prediction based on particle swarm optimization and random forest. Engg. Geol., 265, 105328. doi:https://doi.org/10.1016/j.enggeo.2019.105328
Zhang, Y., Qiu, J., Zhang, Y. and Xie, Y. (2021) The adoption of a support vector machine optimized by GWO to the prediction of soil liquefaction. Environ. Earth Sci., v.80(9), pp.1–9. doi:https://doi.org/10.1007/s12665-021-09648-w
Zhou, J., Huang, S., Wang, M. and Qiu, Y. (2021) Performance evaluation of hybrid GA-SVM and GWO-SVM models to predict earthquake-induced liquefaction potential of soil: a multi-dataset investigation. Engineering with Computers, 0123456789. doi:https://doi.org/10.1007/s00366-021-01418-3.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Ghani, S., Kumari, S. Reliability Analysis for Liquefaction Risk Assessment for the City of Patna, India using Hybrid Computational Modeling. J Geol Soc India 98, 1395–1406 (2022). https://doi.org/10.1007/s12594-022-2187-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12594-022-2187-7