Skip to main content
SpringerLink
Log in

The influence of kenaf fiber as reinforcement on recycled polypropylene/recycled polyamide-6 composites

  • Research Article
  • Published:
International Journal of Plastics Technology

Abstract

The objective of this study is to develop a green composites based on recycled polypropylene (rPP)/recycled polyamide 6 (rPA6) reinforced with kenaf. The investigations were carried out by collecting rPP from the nearest landfill and rPA6 was prepared by re-extrusion and composites preparations were obtained using a twin screw extruder and injection moulding. The rPP/rPA6 composition was selected in a ratio of 70/30 with compositions of kenaf from 10–30 wt.%. Tensile, flexural and impact tests were conducted to investigate the mechanical properties. The composites thermal properties, processing behaviour and morphological study were also investigated. Beside the decrement in impact properties other mechanical properties of the composites were improved upon as the compositions of kenaf were increased. A difficulty resulted in processing the composites using injection moulding machine as the melt flow index values increased. Scanning Electron Microscopy (SEM) micrographs showed an improvement in the dispersion of kenaf in the matrix when kenaf compositions were increased. The overall results showed the best composition of kenaf was at 30 wt. %.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Siddique R, Khatib J, Kaur I (2007) Use of recycled plastic in concrete: A review. Waste Manag 28:1835–1852

    Article  Google Scholar 

  2. Lazarevica D, Aoustina E, Buclet N, Brandt N (2010) Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective. Resour Conserv Recycl 55:246–259

    Article  Google Scholar 

  3. Hong SM, Hwang SS, Jeon BH, Choi JS, Kim HB, Lim ST, Choi HJ (2005) Polypropylene/polyamide 6 blends based on commingled plastic wastes. J Mater Sci 40:3857–3859

    Article  CAS  Google Scholar 

  4. Jaziri M, Barhoumi N, Massardier V, Melis F (2007) Blending PP with PA6 Industrial Wastes: Effect of the Composition and the Compatibilization. J Appl Polym Sci 107:3451–3458

    Article  Google Scholar 

  5. Lin ZD, Chen C, Guan ZX, Tan SZ, Zhang XJ (2011) A Compatibilized Composite of Recycled Polypropylene Filled with Cellulosic Fiber from Recycled Corrugated Paper Board: Mechanical Properties, Morphology, and Thermal Behavior. J Appl Polym Sci 122(4):2789–2797. doi:10.1002/App.34321

    Article  CAS  Google Scholar 

  6. Al-Salem SM, Lettieri P, Baeyens J (2009) Recycling and recovery routes of plastic solid waste (PSW): A review. Waste Manag 29:2625–2643

    Article  CAS  Google Scholar 

  7. Yang W, Tang XG, Xie BH, Zhu YP, Yang MB, Hou M (2008) Heterogeneous Dispersion of the Compatibilizer in the Injection Molding of Polyamide 6/Polypropylene Blends. J Appl Polym Sci 113:299–305

    Article  Google Scholar 

  8. Li X, Tabil LG, Panigrahi S (2007) Chemical Treatment of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review. J Polym Environ 15:25–33

    Article  Google Scholar 

  9. Sukri SM, Suradi NL, Arsad A, Rahmat AR, Hassan A (2012) Green composites based on recycled polyamide-6/recylcled polypropylene kenaf composites: mechanical, thermal and morphological properties. J Polym Eng 32:291–299

    Article  Google Scholar 

  10. Li Y, Wang D, Zhang JM, Xie XM (2010) Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends. Polymer Bulletin 66:841–852

    Article  Google Scholar 

  11. Mishra S, Naik JB (1998) Absorption of Steam and Water at Ambient Temperature in Wood Polymer Composites Prepared from Agro-Waste and Novolac. J Appl Polym Sci 68:1417–1421

    Article  CAS  Google Scholar 

  12. Mishra S, Misra M, Tripathy SS, Nayak SK, Mohanty AK (2001) Graft Copolymerization of Acrylonitrile on Chemically Modified Sisal Fibers. Macromol Mater Eng 286(2):107–113

    Article  CAS  Google Scholar 

  13. Ray D, Sarkar BK, Rana AK, Bose NR (2001) Effect of alkali treated jute fibres on composite properties. B Mater Sci 24(2):129–135. doi:10.1007/Bf02710089

    Article  CAS  Google Scholar 

  14. Yussof AA, Massoumi L, Hassan A (2010) Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rice Husk of Composites: The Influence of Natural Fibers on Mechanical, Thermal and Biodegrability Properties. J Polym Environ 18(3):422–429

    Article  Google Scholar 

  15. Rosch J, Mulhaupt R (1994) The role of core/shell-micro particle dispersions in polypropylene/polyamide-6 blends. Polym Bull 32:697–704

    Article  Google Scholar 

  16. Huda MS, Drzal LT, Mohanty AK, Misra M (2008) Effect of fiber surface-treatments on the properties of laminated biocomposite from poly(lactic acid) (PLA) and kenaf fibers. Compos Sci Technol 68:424–432

    Article  CAS  Google Scholar 

  17. Tawakal ISMA, Talib RA, Abdan K, Ling CN (2012) Mechanical and Physical Properities of Kenaf Derived Cellulose (KDC)-Filled Polylactic Acod (PLA) composite. BioResources 7(2):1643–1655

    Google Scholar 

  18. Ibrahim NA, Yunus WMZW, Othman M, Abdan K (2011) Effect of Chemical Surface Treatment on the Mechanical Properties of Reinforced Plasticized Poly(lactic acid) biodegradable composites. J Reinf Plast Compos 30(5):381–388

    Article  CAS  Google Scholar 

  19. Kalia S, Kaith BS, Kaur I (2009) Pretreatment of Natural Fibers and their Application as Reinforcing Materials in Polymer Composites-A Review. Polym Eng Sci 49(7):1253–1268

    Article  CAS  Google Scholar 

  20. Wahit MU, Hassan A, Rahmat AR, Ishak ZAM (2006) Morphological and mechanical Properties of Rubber-toughened Polyamide-6/Polypropylene Nanocomposites Prepared by Different Methods of Compounding. J Elastomers Plast 38(3):231–248

    Article  CAS  Google Scholar 

  21. Wang Q, Liu C, Chen Z (2001) Pan-Milling Preparation of Polypropylene-graft-Maleic Anhydride and Its Compatibilizing Effect on Polyamide 6/Polypropylene Blend. Polym J 33(7):522–527

    Article  Google Scholar 

  22. Gao H, Xie Y, Qu R, Wang Q (2011) Grafting Effects of polypropylene/polyethylene blends with maleic anhydride on the properties of the resulting wood-plastics composites. Composites: Part A 43:150–157

    Article  Google Scholar 

  23. Lee CK, Cho MS, Kim IH, Lee Y (2010) Preparation and physical properties of the biocompsites, cellulose diactate/kenaf fiber sized with poly(vinyl alcohol). Macromol Res 8(6):566–570

    Article  Google Scholar 

  24. Law TT, Mohd Ishak ZA (2010) Water Absorption and Dimensional Stability of Short Kenaf Fiber-Filled Polypropylene Composites Treated with Maleated Polypropylene. J Appl Polym Sci 120:563–572

    Article  Google Scholar 

  25. Cassagnau P, Barres C (2010) Rheological Behavior of Rubber Nanocomposites. In: Thomas S, Stephen R (eds) Rubber Nanocomposites: Preparation, Properties and Applications. John Wiley & Sons (Asia) Pte. Ltd, India, pp 353–390

    Google Scholar 

Download references

Acknowledgement

The author would like to thank the Universiti Teknologi Malaysia (UTM, JOHOR BAHRU) for GUP grant (00 J30) that supported this research.

Author information

Authors and Affiliations

  1. Department of Polymer Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310, UTM Skudai, Johor Bahru, Johor, Malaysia

    Agus Arsad, Nur Liyana Suradi, Abdul Razak Rahmat & Jibrin Mohammed Danlami

Authors
  1. Agus Arsad
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Nur Liyana Suradi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Abdul Razak Rahmat
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jibrin Mohammed Danlami
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Agus Arsad.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Arsad, A., Suradi, N.L., Rahmat, A.R. et al. The influence of kenaf fiber as reinforcement on recycled polypropylene/recycled polyamide-6 composites. Int J Plast Technol 17, 149–162 (2013). https://doi.org/10.1007/s12588-013-9055-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12588-013-9055-7

Keywords

Search

Navigation