Abstract
Due to requirements of high-precision geometric tolerances for some high precision products, forming errors and clamping errors are unavoidable in the machining process. In this paper, an on-position measurement method is proposed for position error compensation based on the combination datum theory. Firstly, the mathematical representation model of the coaxiality of parts with the shallow holes is constructed based on the combination datum theory. Secondly, an on-position measurement method is proposed with constructing the mathematical model of the profiles of the surfaces based on laser displacement sensors (LDSs) to calculate the coaxiality error of parts on-position based on the combination datum theory. Based on it, the position of the spindle of the machine are adjusted to present the clutter again to compensate for position errors of the holes. Finally, the experimental results demonstrate the effectiveness and correctness of the proposed position error compensation method based on the on-position measurement device.
Similar content being viewed by others
References
Anselmetti, B., & Louati, H. (2005). Generation of manufacturing tolerancing with ISO standards. International Journal of Machine Tools and Manufacture, 45(10), 1124–1131
Krulikowski, A. (1998). Fundamentals of geometric dimensioning and tolerancing. Nantwich: Delmar Publishers.
Chen, W., Xue, J., Tang, D., Chen, H., & Qu, S. (2009). Deformation prediction and error compensation in multilayer milling processes for thin-walled parts. International Journal of Machine Tools and Manufacture, 49(11), 859–864
Badar, M. A., Raman, S., & Pulat, P. S. (2005). Experimental verification of manufacturing error pattern and its utilization in form tolerance sampling. International Journal of Machine Tools and Manufacture, 45(1), 63–73
Ngoi, B. K. A., Lim, L. E. N., Ong, A. S., & Lim, B. H. (1999). Applying the coordinate tolerance system to tolerance stack analysis involving position tolerance. International Journal of Advanced Manufacturing Technology, 15(6), 404–408
Li, Z.-L., Tuysuz, O., Zhu, L.-M., & Altintas, Y. (2018). Surface form error prediction in five-axis flank milling of thin-walled parts. International Journal of Machine Tools and Manufacture, 128, 21–32
Zhou, P., Zhao, X., Tao, B., & Ding, H. (2020). Time-varying isobaric surface reconstruction and path planning for robotic grinding of weak-stiffness workpieces. Robotics and Computer-Integrated Manufacturing, 64, 101945
Wang, L., & Hao, S. (2018). Machining deformation prediction of thin-walled workpieces in five-axis flank milling. International Journal of Advanced Manufacturing Technology, 97(9–12), 4179–4193
Pechard, P.-Y., Tournier, C., Lartigue, C., & Lugarini, J.-P. (2009). Geometrical deviations versus smoothness in 5-axis high-speed flank milling. International Journal of Machine Tools and Manufacture, 49(6), 454–461
Xie, F., Chen, L., Li, Z., & Tang, K. (2020). Path smoothing and feed rate planning for robotic curved layer additive manufacturing. Robotics and Computer-Integrated Manufacturing, 65, 101967
Fu, G., Fu, J., Xu, Y., Chen, Z., & Lai, J. (2015). Accuracy enhancement of five-axis machine tool based on differential motion matrix: Geometric error modeling, identification and compensation. International Journal of Machine Tools and Manufacture, 89, 170–181
Xiang, S., & Altintas, Y. (2016). Modeling and compensation of volumetric errors for five-axis machine tools. International Journal of Machine Tools and Manufacture, 101, 65–78
Ding, S., Huang, X., Yu, C., & Liu, X. (2016). Novel method for position-independent geometric error compensation of five-axis orthogonal machine tool based on error motion. International Journal of Advanced Manufacturing Technology, 83(5), 1069–1078
Habibi, M., Arezoo, B., & Vahebi Nojedeh, M. (2011). Tool deflection and geometrical error compensation by tool path modification. International Journal of Machine Tools and Manufacture, 51(6), 439–449
Chen, W. K., Kuriyagawa, T., Huang, H., & Yosihara, N. (2005). Machining of micro aspherical mould inserts. Precision Engineering, 29(3), 315–323
Chen, F. J., Yin, S. H., Huang, H., Ohmori, H., Wang, Y., Fan, Y. F., et al. (2010). Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement. International Journal of Machine Tools and Manufacture, 50(5), 480–486
Landon, Y., Segonds, S., Lascoumes, P., & Lagarrigue, P. (2004). Tool positioning error (TPE) characterisation in milling. International Journal of Machine Tools and Manufacture, 44(5), 457–464
Chiou, J. C. J. (2004). Accurate tool position for five-axis ruled surface machining by swept envelope approach. Computer-Aided Design, 36(10), 967–974
Lamikiz, A., López de Lacalle, L. N., Ocerin, O., Díez, D., & Maidagan, E. (2008). The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres. International Journal of Advanced Manufacturing Technology, 37(1), 122–139
Ong, T. S., & Hinds, B. K. (2003). The application of tool deflection knowledge in process planning to meet geometric tolerances. International Journal of Machine Tools and Manufacture, 43(7), 731–737
Li, Y., Surisetti, N. P., & Chen, J. C. (2013). Measuring external profiles of porous objects using CMM. International Journal of Advanced Manufacturing Technology, 64(5), 875–887
Ascione, R., & Polini, W. (2010). Measurement of nonrigid freeform surfaces by coordinate measuring machine. International Journal of Advanced Manufacturing Technology, 51(9), 1055–1067
Tian, Q., Yang, Y., Zhang, X., & Ge, B. (2014). An experimental evaluation method for the performance of a laser line scanning system with multiple sensors. Optics and Lasers in Engineering, 52, 241–249
Mahmud, M., Joannic, D., Roy, M., Isheil, A., & Fontaine, J.-F. (2011). 3D part inspection path planning of a laser scanner with control on the uncertainty. Computer-Aided Design, 43(4), 345–355
Wan, A., Song, L., Xu, J., Liu, S., & Chen, K. (2018). Calibration and compensation of machine tool volumetric error using a laser tracker. International Journal of Machine Tools and Manufacture, 124, 126–133
Bradley, C., & Chan, V. (2000). A complementary sensor approach to reverse engineering. Journal of Manufacturing Science and Engineering, 123(1), 74–82
Huang, N., Bi, Q., Wang, Y., & Sun, C. (2014). 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement. International Journal of Machine Tools and Manufacture, 84, 1–8
Song, T., Xi, F., Guo, S., Ming, Z., & Lin, Y. (2015). A comparison study of algorithms for surface normal determination based on point cloud data. Precision Engineering, 39, 47–55
Bi, Q., Huang, N., Zhang, S., Shuai, C., & Wang, Y. (2019). Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping. International Journal of Machine Tools and Manufacture, 136, 34–44
Zeng, W., Rao, Y., Wang, P., & Yi, W. (2017). A solution of worst-case tolerance analysis for partial parallel chains based on the Unified Jacobian-Torsor model. Precision Engineering, 47, 276–291
Miller, S. J. (2006). The method of least squares. Mathematics Department Brown University, 8, 1–7
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zeng, W., Fang, F. & Ma, X. On-position Measurement Method for Position-error Compensation in Machining. Int. J. Precis. Eng. Manuf. 22, 1179–1189 (2021). https://doi.org/10.1007/s12541-021-00528-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-021-00528-8