Curvic coupling is an important component used for ultraprecision machine tools in the machinery and aerospace industry. It plays an important role in accurate positioning of materials on the turret so that they can be precisely machined. However, all ultraprecision-360 T cube couplings used in Korea are imported from Japan. This study aims to examine how to use the FEM (Finite Element Method) for large curvic coupling gears for ultraprecision angle division. Commercial software CATIA is used for design, and ANSYS is used to analyze the large curvic coupling gear. In this study, a new type of large curvic coupling gear combining a large gear with curvic coupling is designed on the basis of the fitting equation as the allowable weight depends on the component size. Stress and friction were analyzed in consideration of external forces of the multi-purpose precision angle division gear of the machine tool, and the maximum allowable external forces of the large curvic coupling gear for ultraprecision angle division were inspected. In general, numerical simulation can significantly reduce the time and cost for pilot production, and be used for various applications, as well as curvic coupling
This is a preview of subscription content, access via your institution.
Buy single article
Instant access to the full article PDF.
Tax calculation will be finalised during checkout.
Park, K. H., Jung, S. J., Wee, H., Kim, J. S., Han, K. S., & Kim, M. H. (2008). A study on the fault detection of auto-transmission according to gear damage. Transactions of the Korean Society for Noise and Vibration Engineering, 18(1), 47–56.
Lee, G. I., Gao, J. C., Jung, Y. S., & Kim, J. Y. (2018). Study of heat generation and cutting accuracy depending on spindle rotation speed change in ultra-precision cutting using ECTS. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 19(2), 265–269.
Mignogna, R. B., Green, R. E., Duke, J. C., Henneke, E. G., & Reifsnider, K. L. (1981). Thermographic investigation of high-power ultrasonic heating in materials. Ultrasonics, 19(4), 159–163.
Xu, Z. Z., Kim, J. S., Kim, L. S., Li, D. Y., & Lyu, S. K. (2015). Study on modular modeling and performance evaluation of a conical gear for marine transmission system. International Journal Of Precision Engineering And Manufacturing, 16(6), 1123–1128.
Xu, Z. Z., Liu, X. J., & Lyu, S. K. (2014). Study on thermal behavior analysis of nut/shaft air cooling ball screw for high-precision feed drive. International Journal Of Precision Engineering And Manufacturing, 15(1), 123–128.
Wu, Y. J., Wang, J. J., & Han, Q. K. (2012). Finite element method for dynamic meshing characteristics analysis of continuous engaged gear drive contact. Journal of Mechanical Science and Technology, 26(6), 1671–1685.
Noh, S. Y., Kim, L. S., Cho, S. H., & Lyu, S. K. (2017). Study on the tooth micro-geometry optimization of planetary gear for drive reducer. Journal of Korean Precision Engineering, 34(6), 371–376.
Ren, F., Qin, D., Lim, T. C., & Lyu, S. K. (2014). Study on dynamic characteristics and load sharing of a herringbone planetary gear with manufacturing errors. International Journal Of Precision Engineering And Manufacturing, 15(9), 1925–1934.
Ooi, J. B., Wang, X., Tan, C. S., Ho, J. H., & Lim, Y. P. (2012). Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation. Journal of Mechanical Science and Technology, 26(2), 575–589.
Mertens, A. J., & Senthilvelan, S. (2016). Durability of polymer gear-paired with steel gear manufactured by wire cut electric discharge machining and hobbing. International Journal Of Precision Engineering And Manufacturing, 17(2), 181–188.
Li, G. Y., Liang, X. H., & Li, F. Y. (2018). Model-based analysis and fault diagnosis of a compound planetary gear set with damaged sun gear. Journal of Mechanical Science and Technology, 32(7), 3081–3096.
Richardson, I. J., Hyde, T. H., Becker, A. A., & Taylor, J. W. (1999). A comparison of two and three dimensional finite element contact analyses of curvic coupling. WIT Transactions on Engineering Sciences, 24, 389–399.
Liu, H., Hong, J., Ruan, S., Li, Z., & Cheng, G. D. (2020). A model accounting for stiffness weakening of curvic coupling under various loading conditions. Mathematical Problems in Engineering, 2020, 1–17.
Jiang, X. J., Zhu, Y. S., Hong, J., & Zhu, L. B. (2016). Stiffness analysis of curvic coupling in tightening by considering different bolt structures. Journal of Aerospace Engineering, 29(3), 1–14.
Huang, C., Wang, J. X., Xiao, K., Li, M., & Li, J. Y. (2013). Dynamic characteristics analysis and experimental research on new type planetary gear apparatus with small tooth number difference. Journal of Mechanical Science and Technology, 27(5), 1233–1244.
He, H. B., Li, H. Y., Xu, Z. Z., Kim, D. U., & Lyu, S. K. (2010). Effect of Mo S2-based composite coatings on tribological behavior and efficiency of gear. International Journal of Precision Engineering And Manufacturing, 11(6), 937–943.
This study was supported by research fund from Chosun University (2018)
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Jung, YS., Gao, JC., Lee, GI. et al. Large Curvic Coupling Gear for Ultraprecision Angle Division Using FEM. Int. J. Precis. Eng. Manuf. 22, 495–503 (2021). https://doi.org/10.1007/s12541-020-00453-2
- Curvic coupling
- Angle division gear
- Angle division of 360 T
- Machine tools