Structural Integrity Analysis and Evaluation of Cooled Cooling Air Heat Exchanger for Aero Engine
- 4 Downloads
The rise in air traffic demand has led to the escalation of concerns about environmental effects, such as pollution emission. Thus, developing a technology that would reduce environmental problems is more urgent. One of the methods for reducing gas emission is to increase the combustion temperature, which, unfortunately, increases the turbine blade temperature. This problem can be solved by installing a heat exchanger on the engine. However, developing the appropriate heat exchanger that can withstand the severe operating conditions of an aircraft engine is difficult. Thus, a heat exchanger has not yet been installed in an aero engine, but is still being developed. This study aims to assess the structural integrity of the heat exchanger being developed. A finite element (FE) analysis was performed under certain flight operating conditions. The surface temperature was measured during the performance test to verify the thermal boundary conditions. The analysis results were then evaluated according to the fatigue strength of Inconel 625 at 104 cycles. Moreover, a transient analysis was conducted to identify the analysis results under a steady state. Its results were compared with those of a static analysis. The comparison showed an acceptable result in their differences. Therefore, the static analysis results of the full model are considered reasonable.
KeywordsHeat exchanger Aero engine Finite element analysis Structural analysis Inconel 625
Unable to display preview. Download preview PDF.
- 1.Wilfert, G., Kriegl, B., Scheugenpflug, H., Bernard, J., Ruiz, X., and Eury, S., “Clean-Validation of a High Efficient Low Nox Core, a GTF High Speed Turbine and an Integration of a Recuperator in an Enviromental Friendly Engine Concept,” Proc. of 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA 2005-4195, 2005.Google Scholar
- 2.Wilfert, G., Sieber, J., Rolt, A., Baker, N., Touyeras, A., and Colantuoni, S., “New Environmental Friendly Aero Engine Core Concepts,” Proc. of XVIII International Symposium of Air Breathing Engines, ISBAE-2007-1120, 2007.Google Scholar
- 4.Kurz, R., “Gas Turbine Performance,” Proc. of 34th Turbosymposium, pp. 131–146, 2005.Google Scholar
- 5.Ahlinder, S., “On Modelling of Compact Tube Bundle Heat Exchangers as Porous Media for Recuperated Gas Turbine Engine Applications,” Ph.D. Thesis, The Brandenburg Technical University, 2006.Google Scholar
- 7.Kim, J. M., “Design and Characterisation of Aerothermal Performance of a Compact Tubular Heat Exchanger for an Aero Gas Turbine,” Ph.D. Thesis, Pusan National University, 2016.Google Scholar
- 8.Lee, J.-M., Lee, S.-W., Kim, Y.-K., Jo, W.-H., Lee, C.-J., and Kim, B.-M., “Extrusion of AA 3003 Micro Condenser Tube with Multi-Hole and Thin Wall Section Using Porthole Die,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 3, pp. 239–245, 2016.CrossRefGoogle Scholar
- 14.ASME, “Boiler and Pressure Vessel Code: Section VIII,” Rules for Construction of Pressure Vessels, Division 2, 2013.Google Scholar
- 15.Special Metals, “INCONEL alloy 625 -Special Metals,” http://www.specialmetals.com/assets/documents/alloys/inconel/inconelalloy-625.pdf (Accessed 12 JUL 2016)Google Scholar