Abstract
This paper proposes a new and effective approach to design a remote-field eddy current testing (RFECT) system equipped with a large number of sensors in order to provide full circumferential coverage of pipelines larger than 6 inches. By developing a parallel digital lock-in amplifier (LIA), the extendibility of receiving sensors can be achieved, and therefore, the modification of RFECT systems, which should be accompanied by sufficiently securing the receiving sensors whose number increases with the pipeline size, can be minimized. Using the design method for an RFECT system based on a parallel digital LIA, a new non-destructive testing (NDT) platform that can be applied to RFECT systems of various sizes without modifying the system architecture is developed. It is then applied to an RFECT system that can be mated with an in-line inspection (ILI) robot and has 36 receiving sensors to inspect unpiggable gas pipelines. The performance of the RFECT system is verified with respect to the sensitivity and the accuracy of defect characterization though the pull-rig test having a number of artificial defects.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bubenik, T., Nestlroth, J., Eiber, R., and Saffell, B., “Magnetic Flux Leakage (MFL) Technology for Natural Gas Pipeline Inspection. Topical Report,” NDT & E International, Vol. 31, No. 5, p. 379, 1998.
Siebert, M. A. and Sutherland, J. E., “Application of the Circumferential Component of Magnetic Flux Leakage Measurement for In-Line Inspection of Pipelines,” BJ Pipeline Inspection Services, 1999.
Maltby, P. M., Edwards, J. S., and Hamilton, J. C., “Method and Apparatus for Ultrasonic Pipeline Inspection,” US Patent, 5460046A, 1995.
Williamson, G. C. and Bonn, W. M., “Evaluation of Ultrasonic Intelligent Pig Performance: Inherent Technical Problems as a Pipeline Inspection Tool-Part 1,” Corrosion Prevention & Control, Vol. 41, No. 6, pp. 148–152, 1994.
Klann, M. and Beuker, T., “Pipeline Inspection with the High Resolution EMAT ILI-Tool: Report on Field Experience,” Proc. of 6th International Pipeline Conference, 2006.
Bubenik, T. A., Nestleroth, J. B., and Leis, B. N., “Introduction to Smart Pigging in Natural Gas Pipelines,” Gas Research Institute Report No. GRI-00-0247, 2000.
Folga, S. M., “Natural Gas Pipeline Technology Overview,” Argonne National Laboratory (ANL), Report No. ANL/EVS/TM/08-5, 2007.
Bickerstaff, R., Vaughn, M., Stoker, G., Hassard, M., and Garrett, M., “Review of Sensor Technologies for In-Line Inspection of Natural Gas Pipelines,” Sandia National Laboratories, 2002.
Atherton, D. L., Mackintosh, D. D., Sullivan, S. P., Dubois, J. M. S., and Schmidt, T. R., “Remote-Field Eddy Current Signal Representation,” Materials Evaluation;(United States), Vol. 51, No. 7, pp. 782–789, 1993.
Teitsma, A. and Maupin, J., “Reduced Mandated Inspection by Remote Field Eddy Current Inspection of Unpiggable Pipelines,” Institute of Gas Technology, Report No. FC26-04NT42266, 2006.
Schmidt, T. R., “The Remote Field Eddy Current Inspection Technique,” Materials Evaluation, Vol. 42, No. 2, pp. 225–230, 1984.
Fisher, J. L., “Remote-Field Eddy Current Inspection,” ASM Handbook, Vol. 17, pp. 195–201, 1989.
Atherton, D. L., “Remote Field Eddy Current Inspection,” IEEE Transactions on Magnetics, Vol. 31, No. 6, pp. 4142–4147, 1995.
FEMTO, “Lock-In Amplifiers Series LIA-MV(D)-200,” http://www.femto.de/en/products/lock-in-amplifiers/module-series-lia-mv-200.html (Accessed 23 DEC 2016)
Burkhardt, G. L., Crouch, A. E., Parvin Jr, A. J., Peterson, R. H., Goyen, T. H., and Tennis, R. F., “Pipeline Inspection Using Variable-Diameter Remote-Field Eddy Current Technology,” US Patent, 7683677B2, 2010.
ASTM E2096, “Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing,” 2000.
Nath, S., Lord, W., and Sun, Y. S., “Theoretical and Experimental Studies of the Remote Field Eddy Current Effect,” in: Review of Progress in Quantitative Nondestructive Evaluation, Thompson, D. O., Chimenti, D. E., (Eds.), Springer, pp. 267–274, 1989.
Atherton, D. L. and Sullivan, S. P., “The Remote-Field through-Wall Electromagnetic Inspection Technique for Pressure Tubes,” Materials Evaluation, Vol. 44, No. 13, pp. 1544–1550, 1986.
Lee, Y. K., Kim, H. M., and Park, G. S., “A Study on the Design of RFECT System for Ferromagnetic Pipelines,” Journal of the Korean Magnetics Society, Vol. 24, No. 6, pp. 171–178, 2014.
Udpa, S. S. and Moore, P. O., “Nondestructive Testing Handbook, Third Edition: Volume 5, Electromagnetic Testing (ET),” The American Society for Nondestructive Testing, 2004.
Pipeline Operator Forum, “Specifications and Requirements for Intelligent Pig Inspection of Pipelines, Version 2009,” 2009.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, JH., Yoo, HR., Kim, DK. et al. Development of RFECT system for in-line inspection robot considering extendibility of receiving sensors based on parallel lock-in amplifier. Int. J. Precis. Eng. Manuf. 18, 145–153 (2017). https://doi.org/10.1007/s12541-017-0020-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-017-0020-9