Abstract
Magnesium alloys as the substitution for heavy metals such as steel and aluminum alloys can substantially reduce weight at many structural parts with design changes. Magnesium alloys also have advantages in recycling, stiffness, NVH, and heat protection. Since magnesium alloy parts such as steering wheels, seat frames, and oil pans are mainly manufactured by die casting processes, their levels of productivity are not so high compared to sheet metal working.
In this study, hood panels with magnesium sheets which have mechanical characteristics equivalent to steel sheets are designed and analyzed. By using finite element analysis, the thicknesses of the inner and outer panel under some design requirements are determined and the shape of the hood inner panel and hinge reinforcements were changed. Dent ability analysis on panel is performed to confirm the new magnesium hood panel by a nonlinear FEM package. Analysis results show that hood panels of magnesium sheets have higher performance in dent ability compared with those of steel sheets.
Similar content being viewed by others
References
Luo, A. A., “Magnesium: Current and potential automotive applications,” J. of Minerals, Metals and materials society, Vol. 54, No. 2, pp. 42–48, 2002.
Mordike, B. L. and Ebert, T., “Magnesium properties-application-potential,” Mater. Sci. Eng. A, Vol. 302, No. 1, pp. 37–45, 2001.
Blawert, C., Hort, N., and Kainer, K. U., “Automotive applications of magnesium and its alloys,” Trans. Indian Inst. Met., Vol. 57, No.4, pp. 397–408, 2004.
Quan, G.-Z., Ku, T.-W., and Kang, B.-S., “Improvement of formability for multi-point bending process of AZ31B sheet material using elastic cushion,” Int. J. Precis. Eng. Manuf., Vol. 12, No.6, pp. 1023–1030, 2011.
Palaniswamy, H., Ngaile, G., and Altan, T., “Finite element simulation of magnesium alloy sheet forming at elevated temperatures,” J. of Materials Processing Technology, Vol. 146, pp. 52–60, 2004.
Hai, D. V., Itoh, S., Sakai, T., Kamado, S., and Kojima, Y., “Experimentally and Numerical Study on Deep Drawing Process for Magnesium Alloy Sheet at Elevated Temperatures,” Materials Transactions, Vol. 49, No. 5, pp. 1101–1106, 2008.
Yang, T. S., “Finite element analysis of elliptic cup deep drawing of magnesium alloy sheet,” J. of Achievements in Materials and Manufacturing Engineering, Vol. 27,Issue 2, pp. 139–142, 2008.
Moll, F., Mekkaoui, M., Schumann, S., and Friedrich, H., “Application of Mg Sheets in Car Body Structures,” Proc. of the 6th International Conf. Magnesium Alloys and Their Applications, pp. 936–942, 2003.
Verma, R. and Carter, J., “Quick Plastic Forming of a Decklid Inner Panel with Commercial AZ31 Magnesium Sheet,” SAE 2006 World Congress & Exhibition, Paper No. 2006-01-0525, 2006.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shin, HW. A feasibility study to replace steel made hood panels by magnesium alloy made hood panels. Int. J. Precis. Eng. Manuf. 13, 2011–2016 (2012). https://doi.org/10.1007/s12541-012-0265-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-012-0265-2