Abstract
Studies on a high speed spindle variable preload technology have been largely conducted. Fixed position preload, constant pressure preload, convertible preload and variable preload methods have been used for the high speed spindle in machine tools. The previous studies performed by the author of this study were variable preload methods using centrifugal force and rubber pressure based on mechanical systems. In this study, a method that applies a variable preload to spindle bearings using various liquids is proposed. Also, the applicability of the proposed method is verified using an analysis on the method. In addition, the application of the proposed variable preload device to machine tool spindles is verified.
Similar content being viewed by others
References
Harris, T. A., “Rolling Bearing Analysis,” Taylor & Francis, 2007.
Harnoy, A., “Bearing Design in Machinery,” Marcel Dekker, 2003.
Hwang, Y. K. and Lee, C. M., “A Review on the Preload Technology of the Rolling Bearing for the Spindle of Machine Tools,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 3, pp. 491–498, 2010.
Croft, D., Shed, G., and Devasia, S., “Creep, Hysteresis, and vibration compensation for piezoactuator: atomic force microscopy application,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 123, pp. 35–43, 2001.
Park, G., Bement, M. T., Hartman, D. A., Smith, R. E., and Farrar, C. R., “The use of active materials for machining processes: a review,” International Journal of Machine Tools & Manufacture, Vol. 47, pp. 2189–2206, 2007.
Tsutsui, S., Aoyama, T., and Inasaki, I., “Development of a spindle system with an adjustable preload mechanism using a piezoelectric actuator,” The Japan Society of Mechanical Engineers, Vol. 31, No. 3, pp. 593–597, 1988.
Chen, J. S. and Chen, K. W., “Bearing load analysis and control of a motorized high speed spindle,” International Journal of Machine Tools & Manufacture, Vol. 45, pp. 1487–1493, 2005.
Nye, T. W., “Active control of bearing preload using piezoelectric translators,” Aerospace Mechanisms Symposium, pp. 259–271, 1990.
Kitamura, K. and Taniguchi, K., “Preload control apparatus for bearings with shape memory alloy springs,” US Patent, No. 5094551, 1992.
Zverev, I. A., Eun, I. U., Hwang, Y. K., Chung, W. J., and Lee, C. M., “An Elastic Deformation Model of High-speed Spindle Units,” Int. J. Precis. Eng. Manuf., Vol. 7, No. 3, pp. 39–46, 2006.
Jiang, S. and Mao, H., “Investigation of variable optimum preload for a machine tool spindle,” International Journal of Machine Tools & Manufacture, Vol. 50, pp. 19–28, 2010.
Research Report of the Korea Institute of Machinery and Materials, “Study of the clearance control for high speed spindle bearing and optimization of spindle cooling system,” M1-0105-00-0049, pp. 15–17, 2004.
Song, C. K. and Shin, Y. J., “Effect of preload on running accuracy of high speed spindle,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 65–70, 2002.
Hwang, Y. K. and Lee, C. M., “Development of automatic the variable preload device for spindle bearing by using centrifugal force,” International Journal of Machine Tools & Manufacture, Vol. 49, pp. 781–787, 2009.
Hwang, Y. K. and Lee, C. M., “Development of a newly structured variable preload control device for a spindle rolling bearing by using an electromagnet,” International Journal of Machine Tools & Manufacture, Vol. 50, pp. 253–259, 2010.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, CH., Lee, CM. A variable preload device using liquid pressure for machine tools spindles. Int. J. Precis. Eng. Manuf. 13, 1009–1012 (2012). https://doi.org/10.1007/s12541-012-0131-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-012-0131-2