Sen, M. and Shan, H. S., “A review of electrochemical macro- to micro-hole drilling processes,” International Journal of Machine Tools & Manufacture, Vol. 45,Issue 2, pp. 137–152, 2005.
Bhattacharyya, B., Mitra, S. and Boro, A. K., “Electrochemical machining: new possibilities for micromachining,” Robotics and Computer Integrated Manufacturing, Vol. 18,Issues 3—4, pp. 283–289, 2002.
Park, M. S. and Chu, C. N., “Micro-electrochemical machining using multiple tool electrodes,” Journal of Micromechanics and Microengineering, Vol. 17, No. 8, pp. 1451–1457, 2007.
Ahn, S. H., Ryu, S. H., Choi, D. K. and Chu, C. N., “Electrochemical micro drilling using ultra short pulses,” Precision Engineering, Vol. 28,Issue 2, pp. 129–134, 2004.
Park, B. J., “Effects of tool electrode size on micro electrochemical machining using ultra short pulses,” Ph. D. dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, 2006.
Sato, T., “Nontraditional Machining,” Yokendo Co. Ltd., 1994.
Masuzawa, T., Jujino, M. and Kobayashi, K., “Wire electrodischarge grinding for micro machining,” Annals of the CIRP, Vol. 34, pp. 431–434, 1985.
Kim, Y. T., Park, S. J. and Lee, S. J., “Micro/Meso-scale Shapes Machining by Micro EDM Process,” International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 2, pp. 5–11, 2005.
Kim, B. H., “Taper reduction by disk-type electrode in micro electrochemical machining,” Ph. D. dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, 2005.
Je, S. U., Kim, D. W., Lee, H. S. and Chu, C. N., “Micro EDM with Ultrasonic Work Fluid Vibration for Deep Hole Machining,” Journal of the Korean Society of Precision Engineering, Vol. 22, No. 7, pp. 47–53, 2005.
Seo, D. W., Park, M. S., Yi, S. M. and Chu, C. N., “Machining Characteristics of Micro-EDMed Holes According to Dielectric Fluid, Capacitance and Ultrasonic Vibration,” Journal of the Korean Society of Precision Engineering, Vol. 24, No. 12, pp. 43–49, 2007.
Bhattacharyya, B., Malapati, M., Munda, J. and Sarkar, A., “Influence of tool vibration on machining performance in electrochemical micro-machining of copper,” International Journal of Machine Tools & Manufacture, Vol. 47, Issue 2, pp. 335–342, 2007.
Munda, J. and Bhattacharyya, B., “Investigation into electrochemical micromachining (EMM) through response surface methodology based approach,” International Journal of Advanced Manufacturing Technology, Vol. 35,Issues 7–8, pp. 821–832, 2008.
Wansheng, Z., Zhenlong, W., Shichun, D., Guanxin, Chi. and Hongyu, W., “Ultrasonic and electric discharge machining to deep and small hole on titanium alloy,” Journal of Materials Processing Technology, Vol. 120,Issues 1–3, pp. 101–106, 2002.