Abstract
Wide magnesium alloy foil is usually difficult to roll due to severe anisotropy or texture. It has become the biggest obstacle to the traditional rolling process, although it can be realized through some special methods. Low efficiency and high cost limit its application. Aimed at this problem, a multi-pass electric plastic rolling process was designed to successfully roll the magnesium alloy foil from 1.0 to 0.13 mm. According to actual test results, the anisotropy and properties of magnesium alloy foil were analyzed when the pulse current densities were adjusted. Under the same temperature as the isothermal rolling process, the pure electric effect could contribute to remarkably improving the plasticity and rollability of magnesium alloy foil. Thus, it could minimize the action of Joule heat as much as possible to avoid surface oxidation and grain growth. In addition, the size effect of magnesium alloy foil should be considered for the electric plastic rolling. Practical measured data verified that varied pulse current densities played important roles in the performances of wide magnesium alloy foil when the grain size and anisotropy were online adjusted by the synergy of electric plastic effect and reduction rate.
Graphical Abstract
Similar content being viewed by others
References
L.P. Yang, H.L. Zhang, Y.S. Zhang, Acta Metall. Sin. 57, 295–308 (2021). https://doi.org/10.11900/0412.1961.2020.00268
J.H. Cho, S.S. Jeong, H.W. Kim, S.B. Kang, Mater. Sci. Eng. A 566, 40–46 (2013). https://doi.org/10.1016/j.msea.2012.12.066
H. Watanabe, T. Mukai, K. Ishikawa, J. Mater. Process. Technol. 182, 644–647 (2007). https://doi.org/10.1016/j.jmatprotec.2006.08.010
R. Cheng, M. Li, S. Du, H. Pan, Y. Liu, M. Gao, G. Qin, Mater. Sci. Eng. A 786, 139332 (2020). https://doi.org/10.1016/j.msea.2020.139332
Z.Y. Zhao, R.G. Guan, Y.F. Shen, P.K. Bai, J. Mater. Sci. Technol. 91, 251–261 (2021). https://doi.org/10.1016/j.jmst.2021.02.052
S. Yu, C. Liu, Y. Gao, S. Jiang, Z. Bao, Mater. Charact. 131, 135–139 (2017). https://doi.org/10.1016/j.matchar.2017.07.015
M. Mohseni, A.R. Eivani, H. Vafaeenezhad, H.R. Jafarian, M.T. Salehi, J. Zhou, J. Market. Res. 15, 3585–3597 (2021). https://doi.org/10.1016/j.jmrt.2021.09.049
A. Javaid, F. Czerwinski, J. Magnes. Alloy. 7, 27–37 (2019). https://doi.org/10.1016/j.jma.2019.02.001
M.E. Mehtedi, A. D’Orazio, A. Forcellese, M. Pieralisi, M. Simoncini, Procedia CIRP 67, 493–497 (2018). https://doi.org/10.1016/j.procir.2017.12.250
E. Tolouie, R. Jamaati, Mater. Sci. Eng. A 738, 81–89 (2018). https://doi.org/10.1016/j.msea.2018.09.086
Z.Z. Jin, X.M. Cheng, M. Zha, J. Rong, H. Zhang, J.G. Wang, H.Y. Wang, J. Mater. Sci. Technol. 35, 2017–2026 (2019). https://doi.org/10.1016/j.jmst.2019.05.017
K.K. Verma, S. Kumar, S. Suwas, Mater. Sci. Eng. A 821, 141480 (2021). https://doi.org/10.1016/j.msea.2021.141480
S.H. Wang, J.F. Ma, J.L. Yang, W.C. Zhang, Y.P. Sun, J.Q. Pan, W.Z. Chen, J. Market. Res. 14, 2124–2130 (2021). https://doi.org/10.1016/j.jmrt.2021.07.124
H.F. Sun, S.J. Liang, E.D. Wang, Trans. Nonferr. Met. Soc. China 19, 349–354 (2009). https://doi.org/10.1016/S1003-6326(10)60067-2
F. Guo, D.F. Zhang, X.S. Yang, L.Y. Jiang, F.S. Pan, Trans. Nonferr. Met. Soc. China 25, 14–21 (2015). https://doi.org/10.1016/S1003-6326(15)63573-7
H.L. Ding, K. Hirai, S. Kamado, Mater. Sci. Eng. A 527, 3379–3385 (2010). https://doi.org/10.1016/j.msea.2010.02.068
S.H. Wang, W.C. Zhang, H.X. Wang, J.L. Yang, W.Z. Chen, G.R. Cui, G.F. Wang, Mater. Sci. Eng. A 803, 140488 (2021). https://doi.org/10.1016/j.msea.2020.140488
Z.X. Su, C.Y. Sun, M.J. Wang, L.Y. Qian, X.T. Li, J. Magnes. Alloy. 10, 281–294 (2022). https://doi.org/10.1016/j.jma.2021.07.022
Z.G. Xu, H.L. Zhang, P. Krishnan, C. Hale, L.J. Kecskes, S. Yarmolenko, J. Sankar, Mech. Mater. 164, 104111 (2022). https://doi.org/10.1016/j.mechmat.2021.104111
X.Q. Li, L. Ren, Q.C. Le, L. Bao, P.P. Jin, P. Wang, C.L. Cheng, X. Zhou, C.L. Hu, J. Magnes. Alloy. 9, 937–949 (2021). https://doi.org/10.1016/j.jma.2020.06.015
C.Y. Ma, N. Xia, W.G. Cheng, M.X. Li, Z.M. Hua, M.W. Ren, H.Y. Wang, J. Alloy. Compd. 869, 159308 (2021). https://doi.org/10.1016/j.jallcom.2021.159308
Y.C. Xin, H. Zhou, G.L. Wu, H.H. Yu, A. Chapuis, Q. Liu, Mater. Sci. Eng. A 639, 534–539 (2015). https://doi.org/10.1016/j.msea.2015.05.070
J. Xu, B. Guan, Y.C. Xin, X.D. Wei, G.J. Huang, C.L. Liu, Q. Liu, J. Mater. Sci. Technol. 99, 251–259 (2022). https://doi.org/10.1016/j.jmst.2021.04.076
X.S. Huang, K. Suzuki, Y. Chino, M. Mabuchi, J. Alloy. Compd. 632, 94–102 (2015). https://doi.org/10.1016/j.jallcom.2015.01.148
S.M. Fatemi, A.K. Kazemi Asl, H. Paul, J. Alloy. Compd. 894, 162412 (2022). https://doi.org/10.1016/j.jallcom.2021.162412
M. Thirumurugan, S. Kumaran, S. Suwas, T.S. Rao, Mater. Sci. Eng. A 528, 8460–8468 (2011). https://doi.org/10.1016/j.msea.2011.07.047
Y.G. Ko, K. Hamad, J. Alloy. Compd. 744, 96–103 (2018). https://doi.org/10.1016/j.jallcom.2018.02.095
W.P. Jia, X.D. Hu, H.Y. Zhao, D.Y. Ju, D.L. Chen, J. Alloy. Compd. 645, 70–77 (2015). https://doi.org/10.1016/j.jallcom.2015.04.121
L. Mei, X.P. Chen, G.J. Huang, Q. Liu, J. Alloy. Compd. 777, 259–263 (2019). https://doi.org/10.1016/j.jallcom.2018.11.012
U.M. Chaudry, T.H. Kim, Y.S. Kim, K. Hamad, Y.G. Ko, J.G. Kim, Mater. Sci. Eng. A 762, 138085 (2019). https://doi.org/10.1016/j.msea.2019.138085
B.Q. Xiao, J.F. Song, A.T. Tang, B. Jiang, W.Y. Sun, Q. Liu, H. Zhao, F. Pan, J. Mater. Process. Tech. 280, 116611 (2020). https://doi.org/10.1016/j.jmatprotec.2020.116611
F. Pan, B. Zeng, B. Jiang, M. Zhang, H. Dong, J. Alloy. Compd. 693, 414–420 (2017). https://doi.org/10.1016/j.jallcom.2016.09.220
C.C. Zhi, L.F. Ma, Q.X. Huang, Z.Q. Huang, J.B. Lin, J. Mater. Process. Tech. 255, 333–339 (2018). https://doi.org/10.1016/j.jmatprotec.2017.12.022
Y.C. Huang, B.Q. Xiao, J.F. Song, H. Zhao, Q. Liu, B. Jiang, F.S. Pan, J. Market. Res. 9, 1988–1997 (2020). https://doi.org/10.1016/j.jmrt.2019.12.031
Y. Zhang, H.T. Jiang, Q. Kang, Y.J. Wang, Y.G. Yang, S.W. Tian, J. Magnes. Alloy. 8, 769–779 (2020). https://doi.org/10.1016/j.jma.2019.11.015
S.W. Lee, G.K. Han, T.S. Jun, S.H. Park, J. Mater. Sci. Technol. 66, 139–149 (2021). https://doi.org/10.1016/j.jmst.2020.04.074
W.Z. Chen, L.M. Ma, X.M. Chen, G.R. Cui, W.C. Zhang, E.D. Wang, Mater. Sci. Eng. A 733, 350–360 (2018). https://doi.org/10.1016/j.msea.2018.07.067
S.M. Fatemi, S. Kheyrabadi, H. Paul, J. Magnes. Alloy. 10, 3470–3484 (2022). https://doi.org/10.1016/j.jma.2021.08.027
S.J. Kim, C.D. Yim, Y.S. Lee, J.H. Yoon, J.H. Lee, Mater. Sci. Eng. A 596, 216–221 (2014). https://doi.org/10.1016/j.msea.2013.12.059
W.K. Wang, W.Z. Chen, W.C. Zhang, G.R. Cui, E.D. Wang, Mater Sci Eng. A 712, 608–615 (2018). https://doi.org/10.1016/j.msea.2017.12.024
A. Malik, Y.W. Wang, F. Nazeer, M.A. Khan, T. Ali, Q.T. Ain, J Mater Res Technol 9, 14478–14499 (2020). https://doi.org/10.1016/j.jmrt.2020.10.023
K. Zhang, J.H. Zheng, Y. Huang, C. Pruncu, J. Jiang, Mater. Design 193, 108793 (2020). https://doi.org/10.1016/j.matdes.2020.108793
R. Floriano, D.R. Leiva, G.C. Melo, T.T. Ishikawa, J. Huot, M. Kaufman, W.J. Botta, Int. J. Hydr. Energy 42, 29394–29405 (2017). https://doi.org/10.1016/j.ijhydene.2017.10.035
H. Asgari, J.A. Szpunar, A.G. Odeshi, L.J. Zeng, E. Olsson, Mater. Sci. Eng. A 633, 92–102 (2015). https://doi.org/10.1016/j.msea.2015.03.020
R. Verma, S.K. Nath, R. Jayaganthan, Mater. Today: Proceed. 5, 17195–17202 (2018). https://doi.org/10.1016/j.matpr.2018.04.129
Z.P. Yu, Y.H. Yan, J. Yao, C. Wang, M. Zha, X.Y. Xu, Q.C. Jiang, J. Alloy. Compd. 744, 211–219 (2018). https://doi.org/10.1016/j.jallcom.2018.01.344
J. Tian, J.F. Deng, R. Ma, Y.Y. Chang, W. Liang, J.Y. Ma, Mater. Lett. 305, 130820 (2021). https://doi.org/10.1016/j.matlet.2021.130820
Q.S. Yang, Q.W. Dai, C. Lou, J.H. Dai, J.Y. Zhang, B. Jiang, F.S. Pan, Progr. Natural Sci.: Mater. Int. 29, 231–236 (2019). https://doi.org/10.1016/j.pnsc.2019.03.008
B. Song, Z.W. Du, Q.S. Yang, N. Guo, S.F. Guo, J.C. Yu, R.L. Xin, Trans. Nonferr. Met. Soc. China 31, 1322–1338 (2021). https://doi.org/10.1016/S1003-6326(21)65580-2
J. Su, M. Sanjari, A.S.H. Kabir, I.H. Jung, J.J. Jonas, S. Yue, H. Utsunomiya, Mater. Sci. Eng. A 636, 582–592 (2015). https://doi.org/10.1016/j.msea.2015.03.083
G.S. Duan, B.L. Wu, X.H. Du, G. Zhao, Y.D. Zhang, X. Zhao, C. Esling, Mater. Sci. Eng. A 620, 120–128 (2015). https://doi.org/10.1016/j.msea.2014.10.001
A.R. Eivani, M. Mehdizade, S. Chabok, J. Zhou, J. Market. Res. 12, 1946–1957 (2021). https://doi.org/10.1016/j.jmrt.2021.03.021
J. Su, M. Sanjari, A.S.H. Kabir, J.J. Jonas, S. Yue, Mater. Sci. Eng. A 662, 412–425 (2016). https://doi.org/10.1016/j.msea.2016.03.047
Q. Xu, A.B. Ma, Y.H. Li, J.P. Sun, Y.C. Yuan, J.H. Jiang, C.Y. Ni, J. Magnes. Alloy. 8, 192–198 (2020). https://doi.org/10.1016/j.jma.2019.05.012
J.A. Del Valle, O.A. Ruano, Mater. Lett. 63, 1551–1554 (2009). https://doi.org/10.1016/j.matlet.2009.04.014
Y. Xu, X.X. Zhang, W. Li, P.H. Hu, J.B. Jia, J.T. Luo, Mater. Sci. Eng. A 781, 139221 (2020). https://doi.org/10.1016/j.msea.2020.139221
Z.G. Li, H.F. Yang, J.G. Liu, F. Liu, J. Magnes. Alloy. 10, 569–584 (2022). https://doi.org/10.1016/j.jma.2021.05.005
J. Wang, Y. Wang, Z.R. Li, Results Phys. 26, 104406 (2021). https://doi.org/10.1016/j.rinp.2021.104406
M. Pekguleryuz, M. Celikin, M. Hoseini, A. Becerra, L. Mackenzie, J. Alloy. Compd. 510, 15–25 (2012). https://doi.org/10.1016/j.jallcom.2011.08.093
J. Tian, H.H. Lu, W.G. Zhang, H.H. Nie, Q.X. Shi, J.F. Deng, L.F. Wang, J. Magnes. Alloy. 10, 2193–2207 (2022). https://doi.org/10.1016/j.jma.2021.01.007
A. Jamali, A.X. Ma, J. Llorca, Scripta Materialia 207, 114304 (2022). https://doi.org/10.1016/j.scriptamat.2021.114304
F.K. Ning, X. Zhou, Q.C. Le, X.Q. Li, Y. Li, Mater. Today Commun. 24, 101129 (2020). https://doi.org/10.1016/j.mtcomm.2020.101129
Y. Nakai, S. Kikuchi, K. Asayama, H. Yoshida, Mater. Sci. Eng. A 826, 141941 (2021). https://doi.org/10.1016/j.msea.2021.141941
H. Zhang, W.L. Cheng, J.F. Fan, B.S. Xu, H.B. Dong, Mater. Sci. Eng. A 637, 243–250 (2015). https://doi.org/10.1016/j.msea.2015.04.057
R.B. Figueiredo, T.G. Langdon, Mater. Sci. Eng. A 556, 211–220 (2012). https://doi.org/10.1016/j.msea.2012.06.079
X.W. Ren, Y.C. Huang, X.Y. Zhang, H. Li, Y.X. Zhao, Mater. Sci. Eng. A 800, 140306 (2021). https://doi.org/10.1016/j.msea.2020.140306
A. Kula, C.J. Silva, M. Niewczas, J. Alloy. Compd. 727, 642–657 (2017). https://doi.org/10.1016/j.jallcom.2017.08.135
J.H. Peng, Z.A. Zhang, P. Guo, W. Zhou, Y.C. Wu, J. Alloy. Compd. 817, 153302 (2020). https://doi.org/10.1016/j.jallcom.2019.153302
G.M. Zhu, L.Y. Wang, Y.J. Sun, X.Q. Shang, J. Wang, H.M. Wang, X.Q. Zeng, Int. J. Plast. 143, 103018 (2021). https://doi.org/10.1016/j.ijplas.2021.103018
D. Liu, Z.Y. Liu, E.D. Wang, Trans. Nonferr. Met. Soc. China 28, 244–325 (2018). https://doi.org/10.1016/S1003-6326(18)64657-6
P.Y. Wang, J.G. Wang, H.L. Jia, C. Wang, J.S. Li, Z.T. Hu, H.Y. Wang, Mater. Sci. Eng. A 819, 141452 (2021). https://doi.org/10.1016/j.msea.2021.141452
X.U. Chun, Y.N. Li, X.H. Rao, Trans. Nonferr. Met. Soc. China 24, 3777–3784 (2014). https://doi.org/10.1016/S1003-6326(14)63532-9
H.J. Guo, X. Zeng, J.F. Fan, H. Zhang, Q. Zhang, W. Li, B. Xu, J. Mater. Sci. Technol. 35, 1113–1120 (2019). https://doi.org/10.1016/j.jmst.2018.11.008
X.P. Li, X.H. Li, Y.D. Ye, R.K. Zhang, S.Z. Kure-Chu, G.Y. Tang, Mater. Sci. Eng. A 742, 722–733 (2019). https://doi.org/10.1016/j.msea.2018.09.041
H. Xiao, Z. Lu, K.F. Zhang, S.S. Jiang, C.C. Shi, Mater. Design 186, 108279 (2020). https://doi.org/10.1016/j.matdes.2019.108279
X.W. Xiao, S. Xu, D. Sui, H. Zhang, Mater. Lett. 288, 362–367 (2021). https://doi.org/10.1016/j.matlet.2021.129362
Acknowledgements
This work was financially supported by the Returned Overseas Scholar Foundation of Hebei Province (Grant No. C20210321) and the Natural Science Foundation of Hebei Province (Grant No. E2021203106).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yang, L., Zhang, H. & Liu, G. Performance Analysis of Wide Magnesium Alloy Foil Rolled by Multi-Pass Electric Plastic Rolling. Met. Mater. Int. 29, 2783–2794 (2023). https://doi.org/10.1007/s12540-023-01414-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-023-01414-w