Abstract
Texture evolution of NiTiFe shape memory alloy (SMA) is investigated during plane strain compression based on crystal plasticity finite element method (CPFEM) and electron back-scatter diffraction (EBSD) experiment. The deformation textures of NiTiFe SMA are not influenced very considerably after experiencing recrystalline annealing at 600 °C for 1 h. Based on the results of CPFEM, the main activated slip systems of NiTiFe SMA are 〈100〉/{110} and 〈111〉/{110} ones during plane strain compression. According to the relationship between texture components and activated slip systems put forward in this study, 〈110〉 direction would rotate to rolling direction, whereas 〈100〉 and 〈111〉 directions would rotate to normal direction. These rotations contribute to the formation of γ-fibre texture and α-fibre texture in NiTiFe SMA. The deformation texture components predicted by CPFEM and determined by EBSD were compared with each other in detail. Due to the startup of the pencil glide and multiple slip in the refined microstructure, there are some differences between texture components predicted by CPFEM and texture components determined by EBSD. The deformation heterogeneity is discussed in terms of rotation angle at each integration point in the study.
Graphic Abstract
Similar content being viewed by others
References
S. Saedi, A.S. Turabi, M.T. Andani, N.S. Moghaddam, M. Elahinia, H. Karaca, Mater. Sci. Eng. A 686, 1–10 (2017)
M. Mehrpouya, A. Gisario, G.B. Broggiato, M. Puopolo, S. Vesco, M. Barletta, Int. J. Adv. Manuf. Technol. 103, 1593–1601 (2019)
J. Sevcikova, M.P. Goldbergova, Biometals 30, 163–169 (2017)
A. Fabregat-Sanjuan, F. Gispert-Guirado, F. Ferrando, S.D.L. Flor, Mater. Sci. Eng. A 712, 281–291 (2018)
M. Elahinia, N.S. Moghaddam, A. Amerinatanzi, S. Saedi, G.P. Toker, H. Karaca, G.S. Bigelow, O. Benafan, Scr. Mater. 145, 90–94 (2018)
Q. Fan, M. Sun, Y. Zhang, Y. Wang, Y. Zhang, H. Peng, K. Sun, X. Fan, S. Huang, Y. Wen, Mater. Charact. 154, 148–160 (2019)
Y.N. Zhao, S.Y. Jiang, Y.Q. Zhang, Y.L. Liang, Acta Metall. Sin. 30, 1–9 (2017)
M. Matsuda, R. Yamashita, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida, J. Alloys Compd. 586, 87–93 (2014)
G. Karthik, B. Kashyap, T.R. Prabhu, Mater. Today Proc. 4, 3581–3589 (2017)
R. Basu, M. Eskandari, L. Upadhayay, M.A. Mohtadi-Bonab, J.A. Szpunar, J. Alloys Compd. 645, 213–222 (2015)
L. Wang, L. Ma, C. Liu, Z.Y. Zhong, S.N. Luo, Mater. Sci. Eng. A 718, 96–103 (2018)
A. Khantachawana, S. Miyazaki, H. Iwai, M. Kohl, Mater. Sci. Eng. A 273–275, 763–768 (1999)
N. Vanderesse, C. Desrayaud, S. Girard-Insardi, M. Darrieulat, Mater. Sci. Eng. A 476, 322–332 (2008)
H. Sheikh, R. Ebrahimi, Int. J. Solids Struct. 126, 175–186 (2017)
M. Liu, C. Lu, K. Tieu, H. Yu, Mater. Sci. Eng. A 619, 57–65 (2014)
E.D.L. Ojos, C.T. Nguyen, A. Orozco-Caballero, G. Timár, J.Q.D. Fonseca, Mater. Sci. Eng. A 729, 37–47 (2018)
W. Hui, L. Cheng, A.K. Tieu, L. Su, G. Deng, Int. J. Mater. Form. 12, 161–171 (2019)
H. Abdolvand, M.R. Daymond, Acta Mater. 60, 2240–2248 (2012)
S.H. Choi, D.H. Kim, H.W. Lee, E.J. Shin, Mater. Sci. Eng. A 527, 1151–1159 (2010)
N. Kamikawa, T. Furuhara, J. Mater. Process. Technol. 213, 1412–1418 (2013)
Y. Li, X. Kang, X. Yin, H. Xie, X. Mi, Trans. Nonferrous Met. Soc. China 24, 2890–2895 (2014)
C. Reuber, P. Eisenlohr, F. Roters, D. Raabe, Acta Mater. 71, 333–348 (2014)
S.L. Wong, M. Madivala, U. Prahl, F. Roters, D. Raabe, Acta Mater. 118, 140–151 (2016)
J. Cheng, S. Ghosh, Int. J. Plast. 67, 148–170 (2015)
J.R. Rice, J. Mech. Phys. Solids 19, 433–455 (1971)
R. Hill, J. Rice, J. Mech. Phys. Solids 20, 401–413 (1972)
D. Peirce, R.J. Asaro, A. Needleman, Acta Metall. 31, 1951–1976 (1983)
D. Peirce, R. Asaro, A. Needleman, Acta Metall. 30, 1087–1119 (1982)
F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, D. Raabe, Acta Mater. 58, 1152–1211 (2010)
M.G. Lee, S.J. Kim, H.N. Han, Int. J. Plast. 26, 688–710 (2010)
S. Manchiraju, P.M. Anderson, Int. J. Plast. 26, 1508–1526 (2010)
J. Zhang, X. Ren, K. Otsuka, K. Tanaka, Y.I. Chumlyakov, M. Asai, Mater. Trans. JIM 40, 385–388 (1999)
C. Yu, G. Kang, Q. Kan, Int. J. Plast. 54, 132–162 (2014)
T. Ezaz, J. Wang, H. Sehitoglu, H.J. Maier, Acta Mater. 61, 67–78 (2013)
Y.I. Chumlyakov, N.S. Surikova, A.D. Korotaev, Phys. Met. Metallogr. 82, 102–109 (1996)
J.A. Moore, D. Frankel, R. Prasannavenkatesan, A.G. Domel, G.B. Olson, W.K. Liu, Int. J. Fatigue 91, 183–194 (2016)
D.M. Norfleet, P.M. Sarosi, S. Manchiraju, M.F.X. Wagner, M.D. Uchic, P.M. Anderson, M.J. Mills, Acta Mater. 57, 3549–3561 (2009)
Y. Liang, S. Jiang, Y. Zhang, H. Li, C. Zhao, Mater. Chem. Phys. 215, 112–120 (2018)
R. Basu, J. Szpunar, M. Eskandari, M. Mohtadi-Bonab, Int. J. Mater. Res. 106, 852–862 (2015)
Y. Zhang, S. Jiang, S. Wang, D. Sun, L. Hu, Mater. Res. Bull. 88, 226–233 (2017)
H.R. Wenk, P.V. Houtte, Rep. Prog. Phys. 67, 1367–1428 (2004)
D.K. Kim, J.M. Kim, W.W. Park, H.W. Lee, Y.T. Im, Y.S. Lee, Comput. Mater. Sci. 100, 52–60 (2015)
Acknowledgements
The work was financially supported by Doctoral Scientific Research Foundation (No. BSJ2019002).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Liang, Y., He, Q., Jiang, S. et al. Investigation on Texture Evolution Mechanism of NiTiFe Shape Memory Alloy Under Plane Strain Compression. Met. Mater. Int. 27, 4047–4058 (2021). https://doi.org/10.1007/s12540-020-00741-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-020-00741-6