Abstract
This paper mainly concerns the enhancement of the microstructure and mechanical properties of the Mg-3Al-1Zn rolled sheet alloy in the half channel angular extrusion (HCAE) process, linking with effects of the starting texture and \(\left\{ {10\bar 12} \right\}\) extension twin. The initial HCAE specimens are prepared by imposing the caxis compression of 5% along the rolling direction to the Mg-3Al-1Zn sheet. They were applied in the HCAE process at the forming temperature of 523 K to make the enhanced microstructure named after HCAE-It, IIt, IIIt according to different starting textures. Improved mechanical properties and homogeneous grain structure with enhanced elongation can be achieved by the specific starting texture (HCAE-It) rather than the effect of the induced \(\left\{ {10\bar 12} \right\}\) extension twins in the initial specimen.
Similar content being viewed by others
References
J. H. Yoon and Y. S. Lee, Mater. Design 55, 43 (2014).
J. H. Yoon, O. Cazacu, and R. K. Mishra, Mater. Sci. Eng. A 565, 203 (2013).
B. Chen, X. Li, C. Hu, and D. Lin, Met. Mater. Int, 20, 489 (2014).
K. K. Ajith-Kumar, U. T. S. Pillai, B. C. Pai, and M. Chakraborty, Met. Mater. Int. 19, 1163 (2013).
C. W. Ha and N. J. Park, Korean J. Met. Mater. 52, 589 (2014).
A. P. Zhilyaev, G. V. Nurislamova, B.-K. Kim, M. D. Baró, J. A. Szpunar, and T. G. Langdon, Acta Mater. 51, 753 (2003).
Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T. G. Langdon, Scripta Mater. 35, 143 (1996).
K. Nakashima, Z. Horita, M. Nemoto, and T. G. Langdon, Mater. Sci. Eng. A 281, 82 (2000).
K. B. Nie, K. Wu, X. J. Wang, K. K. Deng, Y. W. Wu, and M. Y. Zheng, Mater. Sci. Eng. A 527, 7364 (2010).
Q. Chen, D. Shu, C. Hu, Z. Zhao, and B. Yuan, Mater. Sci. Eng. A 541, 98 (2012).
Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai, Acta Mater. 47, 579 (1999).
K. J. Kim and J. H. Yoon, Mater. Sci. Eng. A 578, 160 (2013).
W. N. Tang, R. S. Chena, J. Zhou, and E. H. Han, Mater. Sci. Eng. A 499, 404 (2009).
M. Al-Maharbi, I. Karaman, I. J. Beyerlein, D. Foley, K. T. Hartwig, L. J. Kecskes, and S. N. Mathaudhu, Mater. Sci. Eng. A 528, 7616 (2011).
H. Kitahara, F. Maruno, M. Tsushida, and S. Ando, Mater. Sci. Eng. A 590, 274 (2014).
S. H. Park, H. S. Kim, J. H. Bae, C. D. Yim, and B. S. You, Scripta Mater. 69, 250 (2013).
S. H. Park, S.-G. Hong, and C. S. Lee, Mater. Sci. Eng. A 578, 271 (2013).
E. Yukutake, J. Kaneko, and M. Sugamata, Mater. Trans. 44, 452 (2003).
X. S. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito, J. Alloy Compd. 470, 263 (2009).
D. Wu, R. S. Chen, W. N. Tang, and E. H. Han, Mater. Des. 41, 306 (2012).
Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai, Acta Mater. 47, 579 (1999).
S.-J. Kim, C. D. Yim, Y.-S. Lee, J.-H. Yoon, and J. H. Lee, Mater. Sci. Eng. A 596, 216 (2014).
C. H. Park, C. S. Oh, and S. Kim, Mater. Sci. Eng. A 542, 127 (2012).
Q. Wang, Z. Zhang, X. Zhang, and J. Yu, Trans. Nonferrous Met. Soc. China, 18, 205 (2008).
Y. Chino, M. Mabuchi, K. Shimojima, Y. Yamada, C. Wen, K. Miwa, M. Nakamura, T. Asahina, K. Higashi, and T. Aizawa, Mater. Trans 42, 414 (2001).
I. Beyerlein and C. N. Tome, Mater. Sci. Eng. A 380, 171 (2004).
J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi, Acta Mater. 51, 2055 (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, K., Yoon, J. Effect of \(\left\{ {10\bar 12} \right\}\) extension twins on microstructure enhancement of Mg-3Al-1Zn alloy in half channel angular extrusion. Met. Mater. Int. 21, 753–757 (2015). https://doi.org/10.1007/s12540-015-4401-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-015-4401-2