Abstract
The formation and properties of ceramic seals for SOFC applications prepared by polymer pyrolysis are investigated. A mixture with polymethylsiloxane and fillers are pyrolyzed in a N2 atmosphere. The coefficient of thermal expansion of the ceramic composites was controlled by fillers with a high coefficient of thermal expansion such as AlCo. The morphology of the ceramic composites derived from the mixture with polymethylsiloxane and fillers is composed of fillers embedded in a Si-O-C glass matrix. The thermal expansion behavior and sealing characteristics are measured and discussed
Similar content being viewed by others
References
Y. S. Chou, J. W. Stevenson, and L. A. Chick, J. Am. Ceram. Soc. 86, 1003 (2003).
S. B. Sohn, S. Y. Choi, G. H. Kim, H. S. Song, and G. D. Kim, J. Non-Cryst. Solid 297, 103 (2002).
V. A. C. Haanappel, V. Shemet, S. M. Gross, Th. Koppitz, and N. H. Menzler, J. Power Sources 150, 86 (2005).
S. P. Simner and J. W. Stevenson, J. Power Sources 102, 310 (2001).
N. Lahl, L. Singheiser, K. Hilpert. K. Singh, and D. Bahaudr, Proc. Electrochem. Soc. 99, 1057 (1999).
K. L. Ley, M. Krumpelt, R. Kumar, J. H. Meiser, and I. Bloom, J. Mater. Res. 11, 1489 (1996).
C. A. Lewinsohn and S. Elangovan, Ceram. Eng. Sci. Proc. 24, 317 (2003).
C. A. Lewinsohn, S. Elangovan, and S. M. Quist, Ceram. Eng. Sci. Proc. 25, 315 (2004).
C. A. Lewinsohn, P. Colombo, I. Reimanis, and O. Ünal, J. Am. Ceram. Soc. 84, 2240 (2001).
W. D. Kingery, H. K. Bowen, and D. R. Uhlmann, Introduction to Ceramics, p. 603–604, Wiley, New York (1976).
G. M. Renlund and S. Prochazka, J. Mater. Res. 6, 2723 (1991).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hong, S.J., Kim, D.J. & Yoo, Y.S. Ceramic sealants prepared by polymer pyrolysis. Met. Mater. Int. 17, 41–44 (2011). https://doi.org/10.1007/s12540-011-0206-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-011-0206-0