Abstract
This study reports the plasticity improvement of amorphous alloy associated with skim cold rolling. It was found that, with an increasing reduction in thickness of up to 6 %, the plastic strain increased considerably from 1.5 % to 9.6% while the yield strength deceased slightly from 1.75 GPa to 1.68 GPa. With further rolling beyond 6 %, the changes in the plasticity and yield strength were observed to be insignificant. In this study, we discussed the principle underlying the improved plasticity of amorphous alloy in view of the creation of excess free volume during skim cold rolling.
Similar content being viewed by others
References
A. S. Argon, Acta metall. 27, 47 (1979).
C. M. Lee, S.W. Chae, H. J. Kim, and J. C. Lee, Met. Mater. Int. 13, 3 (2007).
S. W. Lee, M. Y. Huh, S. W. Chae, and J. C. Lee, Scripta mater. 54, 1439 (2006).
F. Spaepen, Acta metall. 25, 407 (1977).
Q. P. Cao, J. F. Li, Y. H. Zhou, A. Horsewell, and J. Z. Jiang, Acta mater. 54, 4373 (2006).
B. P. Kanungo, S. C. Glade, P. A. Kumar, and K. M. Flores, Intermetallics 12, 1073 (2004).
Y. Yokoyama, K. Yamano, K. Fukaura, H. Sunada, and A. Inoue, Scripta mater. 44, 1529 (2001).
J. S. Park, H. K. Lim, J. H. Kim, H. J. Chang, W. T. Kim, D. H. Kim, and E. Fleury, J. Non-Cryst. Solids 351, 2142 (2005).
C. M. Lee, S. C. Lee, S. Y. Shin, N. J. Kim, and J. C. Lee, Mater. Sci. Eng. A 487, 400 (2008).
S. W. Lee, M. Y. Huh, E. Fleury, and J. C. Lee, Acta mater. 54, 349 (2006).
M. Wakeda, Y. Shibutani, S. Ogata, and J. Park, Intermetallics 15, 139 (2007).
Ogata, F. Shimizu, J. Li, M. Wakeda, and Y. Shibutani, Intermetallics 14, 1033 (2006).
K. H. Kim, S. W. Lee, J. P. Ahn, E. Fleury, Y. C. Kim, and J. C. Lee, Met. Mater. Int. 13, 1 (2007).
P. N. Zhang, J. F. Li, Y. Hu, and Y. H. Zhou, J. Alloys Compd. 462, 88 (2008).
K. W. Park, J. I. Jang, M. Wakeda, Y. Shibutani, and J. C. Lee, Scripta mater. 57, 805 (2007).
Y. J. Huang, J. Shen, and J. F. Sun, Appl. Phys. Lett. 90, 081919 (2007).
A. Van Den Beukel, and J. Sietsma, Acta metall. mater. 38, 383 (1990).
W. J. Wright, T. C. Hufnagel, and W. D. Nix, J. Appl. Phys. 93, 1432 (2003).
K. M. Flores, Scripta mater. 54, 327 (2006).
W. H. Jiang, F. E. Pinkerton, and M. Atzmon, Acta mater. 53, 3469 (2005).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pham, M.S., Park, KW., Yoo, BG. et al. Plasticity improvement of amorphous alloy via skim cold rolling. Met. Mater. Int. 15, 209–214 (2009). https://doi.org/10.1007/s12540-009-0209-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-009-0209-2