Abstract
In the present case study, the thermal conductivity of two post-medieval crucibles was determined. The investigated crucible fragments represented two broadly contemporary production sites, Großalmerode and Obernzell, which were employing different types of raw materials (sand tempered kaolinitic clays and natural graphitic clays, respectively) and different firing conditions. The samples were part of a larger assemblage, which had been studied in view of production technology and function of pyrotechnical ceramics in post-medieval Europe and in view of dissemination of products from different production centers. The study results were expected to provide complementary information regarding the technology and use of the crucibles.
References
Allegretta I, Eramo G, Pinto D, Hein A (2017) The effect of mineralogy, microstructure and firing temperature on the thermal conductivity of traditional hot processing ceramics. Appl Clay Sci 135:260–270
Bayley J, Rehren T (2007) Towards a functional and typological classification of crucibles. In: LaNiece S, Hook D, Craddock PT (eds) Metals and mines. Studies in Archaeometallurgy, Archetype, British Museum, London, pp 46–55
Freestone IC (1989) Refractory materials and their procurement. In: Hauptmann A, Pernicka E, Wagner GA (eds) Old world archaeometallurgy. Der Anschnitt Beiheft 7, Deutsches Bergbaumuseum, Bochum, pp 155–162
Hein A, Karatasios I, Müller NS, Kilikoglou V (2013) Heat transfer properties of pyrotechnical ceramics used in ancient metallurgy. Thermochim Acta 573(10):87–94
Kilikoglou V, Vekinis G, Maniatis Y, Day PM (1998) Mechanical performance of quatz-tempered ceramics: part I, strength and toughness. Archaeometry 40(2):261–279
Martinón-Torres M, Rehren T (2009) Post-medieval crucible production and distribution: a study of materials and materialities. Archaeometry 51(1):49–74
Martinón-Torres M, Rehren T (2014) Technical ceramics. In: Roberts BJ, Thornton CP (eds) Archaeometallurgy in global perspective. Springer, New York, pp 107–131
Martinón-Torres M, Rehren T, Freestone IC (2006) Mullite and the mystery of Hessian wares. Nature 444:437–438
Martinón-Torres M, Freestone IC, Hunt A, Rehren T (2008) Mass-produced mullite crucibles in medieval Europe: manufacture and material properties. J Am Ceram Soc 91(6):2071–2074
Müller NS, Kilikoglou V, Day PM, Vekinis G (2014) Thermal shock resistance of tempered archaeological ceramics. In: Martinón-Torres M (ed) Craft and science: international perspectives on archaeological ceramics. Bloomsbury Qatar Foundation, Doha
Uher C (1991) Thermal conductivity of pure semimetals and their dilute alloys. In: Madelung O, White GK (eds) Thermal conductivity of pure metals and alloys. Springer, Berlin, pp 402–448
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hein, A., Kilikoglou, V. & Martinón-Torres, M. Heat transfer properties of post-medieval crucibles. Archaeol Anthropol Sci 11, 1571–1575 (2019). https://doi.org/10.1007/s12520-018-0669-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12520-018-0669-8