Physical characteristics of heat-dissipating smart marble at Al Masjid Al-Haram, Makkah City, Saudi Arabia
- 225 Downloads
The main objective of this study is to highlight the physical principles responsible for the smart characteristics/nature of the Al Masjid Al-Haram marble (MHM) as compared with the ordinary white marble (OWM). The main issue to address is the lack of experimental data and scientific discussion about the intelligent thermal performance of such a thin stone layer as natural cool material. For this purpose, various physical properties have been studied including the solar reflectivity and thermal conductivity; furthermore, X-ray diffraction (XRD), P-wave velocity Vp, and scanning electron microscopy (SEM) were performed to assess the crystalline quality, internal core structure, and the microstructure characteristics respectively. Results showed that the marble at Masjid Al-Haram is characterized with high thermal conductivity and superior solar reflectivity which help in dissipating the absorbed heat from environmental warm air and the incident solar radiation keeping it always cool. As compared with OWM, the MHM exhibited higher Vp which points to a pore-free characteristic of this marble. SEM micrograph revealed the well-arranged calcite crystals of MHM. XRD patterns indicated that calcite is the major mineral phase present in OWM; however, MHM was dolomite dominant.
KeywordsHeat-dissipating marble Thermal conductivity Solar reflectivity P-wave velocity XRD SEM
The research team gratefully acknowledges the Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha, Saudi Arabia.
- ASTM C518-15 (2015) Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus, ASTM International, West Conshohocken, PA, www.astm.org
- ASTM E 903-12, (2012) Standard test method for solar absorptance, reflectance, and transmittance of materials using integrating spheresGoogle Scholar
- ASTM G 173-03, (2003) Standard tables for reference solar spectral irradiances: direct normal and hemispherical on 37 tilted surfacesGoogle Scholar
- Elbeblawy M., Sayed M. A., Boghdadi G. Y. and. Hamd-Allh, H. H., (2013): Using diamond core bit to determine the suitable operating parameters in drilling some marble rocks, pp. 725Google Scholar
- Gomaa W.A. and Rashwan H.M. (1975) Experimental determination of the physical and mechanical properties of some Egyptian ornamental stones ,Assiut University, pp193Google Scholar
- Rao MVMS, Sarma LP, Prasanna Lakshmi KJ (2002) Ultrasonic pulse broadening and attenuation in volcanic rock, a case study. Ind J Pure Appl Phys 40:396–401Google Scholar
- Sharma P. K. and Singh T. N. (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bulletin of Engineering Geology and the Environment (2008) 67:17–22. DOI https://doi.org/10.1007/s10064-007-0109-y
- Zeisig A, Siegesmund S, Weiss T (2002) Thermal expansion and its control on the durability of marbles. In: Siegesmund S, Weiss T, Vollbrecht A (eds) Natural stone, weathering phenomena, conservation strategies and case studies. Geological Society Special Publication No. 205, The Geological Society of London, London, pp 65–80Google Scholar
- Zussman J. (1967): Physical methods in determinative mineralogy, in Zussman, J. (ed) Physical methods in determinative mineralogy, pp. 514Google Scholar