Abstract
The main objectives of slope stability analysis are evaluating factor of safety for a given slip surface and determining the critical slip surface for a given slope. Factor of safety is usually calculated by limit equilibrium method. The main steps to determine the critical slip surface are generating trial slip surfaces as probable solutions and searching among them to determine the one with the lowest factor of safety. Although the process of searching the critical slip surface received much attention between researchers, the significance of method of generating slip surfaces is seldom addressed in the literature. The authors believe that this ignorance can affect the accuracy of the results of slope stability analysis even in the simplest problems with circular slip surfaces. Consequently, this paper focused on the method of generating circular trial slip surfaces as the simplest mechanism of sliding and considered its effect on determining the critical slip surface. A new method of generating circular slip surface was presented, which is more efficient and less restricted than the conventional method. A computer program was also developed to determine the critical slip surface of slopes by using particle swarm optimization. The performances of the proposed method and developed computer program were verified during comparative studies and sensitivity analysis. Based on the results, the effect of method of generating circular slip surfaces on determining the critical slip surface was confirmed successfully. In all considered problems, the proposed method of generating circular slip surfaces led to the lower values of factor of safety compare with the conventional method.
Similar content being viewed by others
References
Baker R (1980) Determination of the critical slip surface in slope stability computation. Int J Numer Anal Meth Geomech 4(4):333–359
Bishop AW (1955) The use of the slip circle in the stability analysis of earth slope. Geotechnique 5(1):7–17
Chen W, Chen P (2011) PSOslope: a stand-alone Windows application for graphic analysis of slope stability. In: Advances in Swarm Optimization Second International Conference, ICSI 2011, Chongqing, pp. 56–63
Chen ZY, Morgenstern NR (1983) Extensions to the generalized method of slices for stability analysis. Can Geotech J 20(1):104–119
Cheng YM (2003) Location of critical failure surface and some further studies on slope stability analysis. Comput Geotech 30:255–267
Cheng YM, Li L, Chi SC, Wei WB (2007a) Particle swarm optimization algorithm for the location of the critical non-circular failure in two-dimensional slope stability analysis. Comput Geotech 34(2):92–103
Cheng Y, Li L, Chi S (2007b) Performance studies on six heuristic global optimization methods in the location of critical slip surface. Comput Geotech 34:462–484
Cheng YM, Liang L, Chi SC, Wei WB (2008) Determination of the critical slip surface using artificial fish swarms algorithm. J Geotech Geoenviron Eng 134(2):244–251
Choobbasti AJ, Farrokhzad F, Barari A (2009) Prediction of slope stability using artificial neural network (case study: Noabad, Mazandaran, Iran). Arab J Geosci 2:311–319
Fellenius WK (1927) Erdstatische Berechnungen mit Reibung und Kohäsion (Adhäsion) und unter Annahme kreiszylindrischer Gleitflächen. W Ernest and Sohn, Berlin
Fredlund DG, Krahn J (1977) Comparison of slope stability methods of analysis. Can Geotech J 16:121–139
Goh AT (1999) Genetic algorithm search for critical slip surface in multiple-wedge stability analysis. Can Geotech J 36(2):382–391
Goh AT (2000) Search for critical slip circle using genetic algorithms. Civ Eng Environ Syst 17(3):181–211
Goshtasbi K, Ataei M, Kalatehjary R (2008) Slope modification of open pit wall using a genetic algorithm- case study: southern wall of the 6th Golbini jajarm bauxite mine. J South Afr Inst Min Metall 108:651–656
Hajiazizi M (2010) A new approach for numerical analysis in optimum critical line segment slip surface in earth slopes. Int J Acad Res 2(3):125–132
Janbu N (1973) Slope Stability Computations. Embankment Dam Engineering, The Casagrande, pp 47–86
Kahatadeniya K, Nanakorn P, Neaupane K (2009) Determination of the critical failure surface for slope stability analysis using ant colony. Eng Geol 108:133–141
Kalatehjari R, Ali N, Ashrafi E (2011) Finding the critical slip surface of a soil slope with the aid of particle swarm optimization. In: 11th International Multidisciplinary Scientific GeoConference, SGEM2011, Bulgaria, pp. 459–466
Kelarestaghi A, Ahmadi H (2009) Landslide susceptibility analysis with a bivariate approach and GIS in Northern Iran. Arab J Geosci 2:95–101
Kennedy J, Eberhart R (1995) Particle swarm optimization. In: IEEE International Conference on Neural Networks, Perth, WA, pp. 1942–1948
Li L, Chu XS (2010) An improved swarm optimization algorithm with harmony strategy for the location of critical slip surface of slopes. China Ocean Eng 25(2):357–364
Li L, Yu G, Chen Z, Chu X (2010a) Discontinuous flying particle swarm optimization algorithm and its application to slope stability analysis. J Cent S Univ Technol 17(4):852–856
Li YC, Chen YM, Zhan TLT, Ling DS, Cleall PJ (2010b) An efficient approach for locating the critical slip surface in slope stability analyses using a real-coded genetic algorithm. Can Geotech J 47:806–820
Mendes R, Cortes P, Rocha M, Neves J (2002) Particle swarm for feed forward neural net training. In: Proceeding of the International Joint Conference on Neural Networks, Honolulu, HI, pp. 1895–1899
Morgenstern N, Price V (1965) The analysis of the stability of general slip surfaces. Geotechnique 15(1):79–93
Poli R, Kennedy J, Blackwell T (2007) Particle swarm optimization: an overview. Swarm Intelligence 1:33–57
Rini DP, Shamsuddin SM, Yuhaniz SS (2011) Particle swarm optimization: technique, system and challenges. Int J Comp App 14(1):19–27
Sarma SK (1973) Stability analysis of embankments and slopes. Geotechnique 23(3):423–433
Sarma SK (1979) Stability analysis of embankments and slopes. J Geotech Eng Div 105(12):1511–1524
Sarma SK (1987) A note on the stability analysis of slopes. Geotechnique 37(1):107–111
Sharma LP, Patel N, Debnath P, Ghose MK (2012) Assessing landslide vulnerability from soil characteristics—a GIS-based analysis. Arab J Geosci 5:789–796
Spencer E (1967) A method of analysis of the stability of embankments assuming parallel inter-slice forces. Geotechnique 17(1):11–26
Sun G, Zheng H, Jiang W (2013) A global procedure for evaluating stability of the three-dimensional slopes. Nat Hazards (in press)
Taylor DW (1948) Fundamentals of soil mechanics. Wiley, New York
Tian D, Wang S, Xu L (2009) The Application of particle swarm optimization on the search of critical slip surface. In: International Conference on Information Engineering and Computer Science, ICIECS 2009, Wuhan, pp. 1–4
Zhao HB, Zou ZS, Ru ZL (2008) Chaotic particle swarm optimization for non-circular critical slip surface identification in slope stability analysis. In: Cai M, Wang JA (eds) Boundaries of Rock Mechanics, Recent Advances and Challenges for the 21st Century, London, UK, pp. 585–588
Zolfaghari A, Heath R, McCombie P (2005) Simple genetic algorithm search for critical noncircular failure surface in slope stability analysis. Comput Geotech 32(3):139–152
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kalatehjari, R., Ali, N., Kholghifard, M. et al. The effects of method of generating circular slip surfaces on determining the critical slip surface by particle swarm optimization. Arab J Geosci 7, 1529–1539 (2014). https://doi.org/10.1007/s12517-013-0922-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12517-013-0922-5