Avoid common mistakes on your manuscript.
Correction to: International Journal of Material Forming (2020) 14:223–233
The article Calibration of the residual stresses with an active die during the ejection phase of cold extrusion, written by Alessandro Franceschi, Fabian Jaeger, Holger Hoche, Matthias Oechsner, Peter Groche, was originally published Online First without Open Access. After publication in volume 14, issue 2, page 223–233 the author decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to ©The Author(s) 2022 and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Franceschi, A., Jaeger, F., Hoche, H. et al. Correction to: Calibration of the residual stresses with an active die during the ejection phase of cold extrusion. Int J Mater Form 15, 56 (2022). https://doi.org/10.1007/s12289-022-01703-6
Published:
DOI: https://doi.org/10.1007/s12289-022-01703-6