Andrade-Cabrera C, Turner WJN, Finn DP (2019). Augmented Ensemble Calibration of lumped-parameter building models. Building Simulation, 12: 207–230.
ANSI/ASHRAE (2014). ASHRAE Guideline 14-2014. Measurement of Energy, Demand, and Water Savings. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Asadi S, Mostavi E, Boussaa D, Indraganti M (2019). Building energy model calibration using automated optimization-based algorithm. Energy and Buildings, 198: 106–114.
ASHRAE (2017). Chapter 19: Energy Estimating and Modeling Methods. In: ASHRAE Handbook—Fundamentals. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Balaras CA, Dascalaki EG, Droutsa KG, et al. (2016). Empirical assessment of calculated and actual heating energy use in Hellenic residential buildings. Applied Energy, 164: 115–132.
California Energy Commission (2013). Building Energy Efficiency Standards for Residential and Nonresidential Buildings. Available at https://ww2.energy.ca.gov/title24/2013standards/.
California Public Utilities Commission (2020). The Database for Energy Efficient Resources (DEER). Available at http://www.deeresources.com/.
Chen Y, Hong T, Piette MA (2017). Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis. Applied Energy, 205: 323–335.
Chen Y, Hong T, Luo X, et al. (2019). Development of City buildings dataset for urban building energy modeling. Energy and Buildings, 183: 252–265.
Chen Y, Deng Z, Hong T (2020). Automatic and rapid calibration of urban building energy models by learning from energy performance database. Applied Energy, 277: 115584.
Chong A, Chao S (2020). A framework for the continuous calibration of building energy models with uncertainty. In: Proceedings of the 16th International IBPSA Building Simulation Conference, Rome, Italy.
Coakley D, Raftery P, Keane M (2014). A review of methods to match building energy simulation models to measured data. Renewable and Sustainable Energy Reviews, 37: 123–141.
Cuerda E, Guerra-Santin O, Sendra JJ, et al. (2020). Understanding the performance gap in energy retrofitting: Measured input data for adjusting building simulation models. Energy and Buildings, 209: 109688.
Deru M, Field K, Studer D, et al. (2011). U.S. Department of Energy commercial Reference Building Models of The National Building Stock. National Renewable Energy Laboratory (NREL). NREL/TP-5500-46861, doi:https://doi.org/10.2172/1009264.
Ding Y, Han S, Tian Z, et al. (2022). Review on occupancy detection and prediction in building simulation. Building Simulation, 15: 333–356.
DOE (2018). EnergyPlus V9.2 Documentation: Output Details and Examples. U.S. Department of Energy. Available at https://bigladdersoftware.com/epx/docs/9-2/output-details-and-examples/index.html.
DOE (2019). BayREN Integrated Commercial Retrofits (BRICR). U.S. Department of Energy. Available at https://www.energy.gov/eere/buildings/downloads/bayren-integrated-commercial-retrofits-bricr.
Garrett A, New J (2015). Scalable tuning of building models to hourly data. Energy, 84: 493–502.
Heo Y, Choudhary R, Augenbroe GA (2012). Calibration of building energy models for retrofit analysis under uncertainty. Energy and Buildings, 47: 550–560.
Hong T, Kim J, Jeong J, et al. (2017). Automatic calibration model of a building energy simulation using optimization algorithm. Energy Procedia, 105: 3698–3704.
Hong T, Langevin J, Sun K (2018). Building simulation: Ten challenges. Building Simulation, 11: 871–898.
Hong T, Piette MA, Chen Y, et al. (2015). Commercial Building Energy Saver: An energy retrofit analysis toolkit. Applied Energy, 159: 298–309.
Johnson N (2017). Building energy model calibration for retrofit decision making. Master Thesis, Portland State University, USA.
Kharvari F, Azimi S, O’Brien W (2022). A comprehensive simulation-based assessment of office building performance adaptability to teleworking scenarios in different Canadian climate zones. Building Simulation, 15: 995–1014.
La Fleur L, Moshfegh B, Rohdin P (2017). Measured and predicted energy use and indoor climate before and after a major renovation of an apartment building in Sweden. Energy and Buildings, 146: 98–110.
Lam KP, Zhao J, Ydstie EB, et al. (2014). An EnergyPlus whole building energy model calibration method for office buildings using occupant behavior data mining and empirical data. In: Proceedings of ASHRAE/IBPSA-USA Building Simulation Conference, Atlanta, GA, USA.
Lamagna M, Nastasi B, Groppi D, et al. (2020). Hourly energy profile determination technique from monthly energy bills. Building Simulation, 13: 1235–1248.
Lu X, Feng F, Pang Z, et al. (2021). Extracting typical occupancy schedules from social media (TOSSM) and its integration with building energy modeling. Building Simulation, 14: 25–41.
Martínez S, Eguía P, Granada E, et al. (2020). A performance comparison of multi-objective optimization-based approaches for calibrating white-box building energy models. Energy and Buildings, 216: 109942.
Raillon L, Ghiaus C (2018). An efficient Bayesian experimental calibration of dynamic thermal models. Energy, 152: 818–833.
Ramos Ruiz G, Fernández Bandera C, Gómez-Acebo Temes T, et al. (2016). Genetic algorithm for building envelope calibration. Applied Energy, 168: 691–705.
Reddy TA (2006). Literature review on calibration of building energy simulation programs. ASHRAE Transactions, 112 (1): 226–240.
Roth A, Goldwasser D, Parker A (2016). There’s a measure for that! Energy and Buildings, 117: 321–331.
Samuelson HW, Ghorayshi A, Reinhart CF (2016). Analysis of a simplified calibration procedure for 18 design-phase building energy models. Journal of Building Performance Simulation, 9: 17–29.
San Francisco Department of the Environment (2020). San Francisco’s Existing Buildings Ordinance. Available at https://sfenvironment.org/article/san-franciscos-existing-commercial-buildings-ordinance.
Sun K, Hong T, Taylor-Lange SC, et al. (2016). A pattern-based automated approach to building energy model calibration. Applied Energy, 165: 214–224.
Tang R, Wang S, Sun S (2021). Impacts of technology-guided occupant behavior on air-conditioning system control and building energy use. Building Simulation, 14: 209–217.
Wang D, Pang X, Wang W, et al. (2020). Evaluation of the dynamic energy performance gap of green buildings: Case studies in China. Building Simulation, 13: 1191–1204.
Yin R, Kiliccote S, Piette MA (2016). Linking measurements and models in commercial buildings: a case study for model calibration and demand response strategy evaluation. Energy and Buildings, 124: 222–235.
Yoshino H, Hong T, Nord N (2017). IEA EBC annex 53: Total energy use in buildings—Analysis and evaluation methods. Energy and Buildings, 152: 124–136.
Zhou X, Tian S, An J, et al. (2022). Modeling occupant behavior’s influence on the energy efficiency of solar domestic hot water systems. Applied Energy, 309: 118503.
Zibin N, Zmeureanu R, Love J (2016). Automatic assisted calibration tool for coupling building automation system trend data with commissioning. Automation in Construction, 61: 124–133.