Skip to main content
SpringerLink
Log in

A low-resistance elbow with a bionic sawtooth guide vane in ventilation and air conditioning systems

  • Research Article
  • Published:
Building Simulation Aims and scope Submit manuscript

Abstract

Elbow resistance is an important part of energy consumption in ventilation and air conditioning (VAC) systems. By considering the structural characteristics of bat wings and humpback whale pectoral fins, a simplified leading edge for sawtooth guide vanes is designed. Based on the theory of fluid mechanics, the resistance reduction mechanism of the sawtooth guide vane is analyzed. The numerical calculation results show that proper sawtooth groove parameters for the guide vane can effectively reduce the elbow resistance. Compared with that for a normal guide vane, the maximum resistance can be reduced by approximately 9% with the new design. In addition, we analyze the influence of the sawtooth guide vane on the entropy production of the duct elbow and the relationship between entropy production and the resistance of the duct elbow. Finally, the resistance reduction performance of the sawtooth guide vane is verified through full-scale tests.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • ASHRAE (2016). ASHRAE/IES Standard 90.1-2016: Energy Standard for Buildings Except Low-Rise Residential Buildings. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.

    Google Scholar 

  • Dudley R (2000). The evolutionary physiology of animal flight: Paleobiological and present perspectives. Annual Review of Physiology, 62: 135–155.

    Article  Google Scholar 

  • Dyke G, De KR, Palmer C, et al. (2013). Aerodynamic performance of the feathered dinosaur microraptor and the evolution of feathered flight. Nature Communications, 4: 2489.

    Article  Google Scholar 

  • Fish FE, Weber PW, Murray MM, et al. (2011). The tubercles on humpback whales’ flippers: application of bio-inspired technology. Integrative and Comparative Biology, 51: 203–213.

    Article  Google Scholar 

  • Gao R, Li A (2011). Modeling deposition of particles in vertical square ventilation duct flows. Building and Environment, 46: 245–252.

    Article  Google Scholar 

  • Gao R, Fang Z, Li A, et al. (2018a). A novel low-resistance tee of ventilation and air conditioning duct based on energy dissipation control. Applied Thermal Engineering, 132: 790–800.

    Article  Google Scholar 

  • Gao R, Liu K, Li A, et al. (2018b). Biomimetic duct tee for reducing the local resistance of a ventilation and air-conditioning system. Building and Environment, 129: 130–141.

    Article  Google Scholar 

  • Gao R, Liu K, Li A, et al. (2018c). Study of the shape optimization of a tee guide vane in a ventilation and air-conditioning duct. Building and Environment, 132: 345–356.

    Article  Google Scholar 

  • Gu Y, Zhao G, Zheng J, et al. (2014). Experimental and numerical investigation on drag reduction of non-smooth bionic jet surface. Ocean Engineering, 81: 50–57.

    Article  Google Scholar 

  • Gu Y, Yu S, Mou J, et al. (2019). Experimental study of drag reduction characteristics related to the multifactor coupling of a bionic jet surface. Journal of Hydrodynamics, 31: 186–194.

    Article  Google Scholar 

  • Hu S, Yan D, Guo S, et al. (2017). A survey on energy consumption and energy usage behavior of households and residential building in urban China. Energy and Buildings, 148: 366–378.

    Article  Google Scholar 

  • Ito H (1960). Pressure losses in smooth pipe bends. Journal of Basic Engineering, 82: 131–140.

    Article  Google Scholar 

  • Ito H, Imai K (1966). Pressure losses in vaned elbows of a circular cross section. Journal of Basic Engineering, 88: 684–685.

    Article  Google Scholar 

  • Ito H (1987). Flow in curved pipes. JSME International Journal, 30: 543–552.

    Article  Google Scholar 

  • Kock F, Herwig H (2004). Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functions. International Journal of Heat and Mass Transfer, 47: 2205–2215.

    Article  Google Scholar 

  • Lawlor TE (1973). Aerodynamic characteristics of some neotropical bats. Journal of Mammalogy, 54: 71–78.

    Article  Google Scholar 

  • Li F, Zhao G, Liu W (2017). Research on drag reduction performance of turbulent boundary layer on bionic jet surface. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 231: 258–270.

    Google Scholar 

  • Liu E, Li L, Wang G, et al. (2017). Drag reduction through self-texturing compliant bionic materials. Scientific Reports, 7: 40038.

    Article  Google Scholar 

  • Modi PP, Jayanti S (2004). Pressure losses and flow maldistribution in ducts with sharp bends. Chemical Engineering Research and Design, 82: 321–331.

    Article  Google Scholar 

  • Prakash S, Markfort CD (2020). Experimental investigation of aerodynamic characteristics of bat carcasses after collision with a wind turbine. Wind Energy Science, 5: 745–758.

    Article  Google Scholar 

  • Reid JC, Brookes SJ, Evans DJ, et al. (2014). The dissipation function: its relationship to entropy production, theorems for nonequilibrium systems and observations on its extrema. In: Dewar R, Lineweaver C, Niven R, et al. (eds), Beyond the Second Law. Understanding Complex Systems. Berlin: Springer. pp: 31–47.

    Chapter  Google Scholar 

  • Roache PJ (1997). Quantification of uncertainty in computational fluid dynamics. Annual Review of Fluid Mechanics, 29: 123–160.

    Article  MathSciNet  Google Scholar 

  • Sahlin A, Johansson AV (1991). Design of guide vanes for minimizing the pressure loss in sharp bends. Physics of Fluids A: Fluid Dynamics, 3: 1934–1940.

    Article  Google Scholar 

  • Schobeiri MT (2010). Fluid Mechanics for Engineers: A Graduate Textbook. Berlin: Springer.

    Book  Google Scholar 

  • Soto-Francés VM, Pinazo-Ojer J, Sarabia-Escrivá et al. (2019). On using the minimum energy dissipation to estimate the steady-state of a flow network and discussion about the resulting power-law: application to tree-shaped networks in HVAC systems. Energy, 172: 181–195.

    Article  Google Scholar 

  • Taheri A, Khoshnevis AB, Lakzian E (2020). The effects of wall curvature and adverse pressure gradient on air ducts in HVAC systems using turbulent entropy generation analysis. International Journal of Refrigeration, 113: 21–30.

    Article  Google Scholar 

  • Reghunathan Valsala R, Son SW, Suryan A, et al. (2019). Study on reduction in pressure losses in pipe bends using guide vanes. Journal of Visualization, 22: 795–807.

    Article  Google Scholar 

  • Vaughan TA (1966). Morphology and flight characteristics of molossid bats. Journal of Mammalogy, 47: 249–260.

    Article  Google Scholar 

  • Vedavarz A, Kumar S, Hussain, MI (2007). The Handbook of Heating, Ventilation, and Air Conditioning for Design and Implementation, 4th edn. New York: Industrial Press.

    Google Scholar 

  • Versteeg HK, Malalasekera W (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume Method, 2nd edn. New York: Pearson Education.

    Google Scholar 

  • Wu L, Jiao Z, Song Y, et al. (2018). Experimental investigations on drag-reduction characteristics of bionic surface with water-trapping microstructures of fish scales. Scientific Reports, 8: 12186.

    Article  Google Scholar 

  • Yang J, Guo Y, Wang J, et al. (2007). Experimental study on flow drag reduction of vortex finder in guide vane cyclone tube. Journal of China University of Petroleum, 31(5): 83–86. (in Chinese)

    Google Scholar 

  • Zhang C, Li A, Li, J, et al. (2021). Radiation noise control of a 90° rectangular elbow in ventilation and air conditioning systems. Journal of Buidling Engineering, 37: 102157.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Building Services Science and Engineering, Xi’an University of Architecture and Technology (XAUAT), Xi’an, 710055, China

    Chi Zhang, Angui Li, Jigang Che, Yue Li, Qi Liu & Yuhang Zhao

  2. The Artificial Environment Control Technology Achievement Innovation Center of XAUAT and Yantai, Yantai, 264006, China

    Angui Li

Authors
  1. Chi Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Angui Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jigang Che
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yue Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Qi Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yuhang Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Angui Li.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, C., Li, A., Che, J. et al. A low-resistance elbow with a bionic sawtooth guide vane in ventilation and air conditioning systems. Build. Simul. 15, 117–128 (2022). https://doi.org/10.1007/s12273-021-0782-y

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12273-021-0782-y

Keywords

Search

Navigation