Skip to main content
SpringerLink
Log in

Effectiveness of passive measures against climate change: Case studies in Central Italy

  • Research Article
  • Building Thermal, Lighting, and Acoustics Modeling
  • Published:
Building Simulation Aims and scope Submit manuscript

Abstract

This paper focuses on the effectiveness of passive adaptation measures against climate change, in the medium (2036–2065) and long term (2066–2095), for three case studies located in Florence (central Italy). In order to identify and highlight the passive measures which can provide comfort conditions with the lowest net heating and cooling energy demand, the input assumptions consider a constant thermal comfort level and don’t take into account either the effect of HVAC system’s performance and the degradation of the materials by ageing. The study results show that, in case of poorly insulated buildings, on the medium term, the reduction of energy needed for heating could be bigger than the increase for cooling, resulting in a total annual net energy need decrease, while in the long term the opposite happens. Conversely, considering a high level of thermal insulation, due to the large increase in cooling demand, the total annual energy need rises in both periods. Furthermore, attention should be paid to internal loads and solar gains that, due to the projected climate change, could become main contributors to the energy balance. In general, since the magnitude of energy need increase for cooling and decrease for heating is very significant on the long term, and varies in function of the type of building, the passive measure adopted and the level of thermal insulation, the research results lead to pay close attention to different types of energy refurbishment interventions, that should be selected in function of their effectiveness over time.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Agrometeorological Service Tuscany Region (2015). Historical archives consultation (1990–2010). Available at http://agrometeo.arsia. toscana.it. Accessed 30 Oct 2015. (in Italian)

    Google Scholar 

  • Asimakopoulos DA, Santamouris M, Farrou I, Laskari M, Saliari M, Zanis G, Giannakidis G, Tigas K, Kapsomenakis J, Douvis C, Zerefos SC, Antonakaki T, Giannakopoulos C (2012). Modelling the energy demand projection of the building sector in Greece in the 21st century. Energy and Buildings, 49: 488–498.

    Article  Google Scholar 

  • Belcher SE, Hacker JN, Powell DS (2005). Constructing design weather data for future climates. Building Services Engineering Research and Technology, 26: 49–61.

    Article  Google Scholar 

  • Berger T, Amann C, Formayer H, Korjenic A, Pospichal B, Neururer C, Smutny R (2014). Impacts of urban location and climate change upon energy demand of office buildings in Vienna, Austria. Building and Environment, 81: 258–269.

    Article  Google Scholar 

  • Bucchignani E, Montesarchio M, Zollo AL, Mercogliano P (2016). High-resolution climate simulations with COSMO-CLM over Italy: Performance evaluation and climate projections for the 21st century. International Journal of Climatology, 36: 735–756.

    Article  Google Scholar 

  • Christensen JH, Hewitson B, Busuioc A, Gao X, Held I, Jones R, Kolli RK, Kwon W-T, Laprise R, Magaña Rueda V, Mearns L, Menéndez GC, Räisänen J, Rinke A, Sarr A, Whetton P (2007). Regional climate projections. In: Solomon S, Qin D, Manning M, Chen Z, Marquis M, Averyt KB, Tignor M, Miller HL (eds), Climate Change 2007: The Physical Science Basis: Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge, UK: Cambridge University Press.

    Google Scholar 

  • Coley D, Kershaw T, Eames M (2012). A comparison of structural and behavioural adaptations to future proofing buildings against higher temperatures. Building and Environment, 55: 159–166.

    Article  Google Scholar 

  • CTI (2009). Methodology for Climate Data Processing to Prepare “Test Reference Years”. Milan, Italy: Italian Thermotechnic Committee. (in Italian)

    Google Scholar 

  • CTI (2010a). Calculation of Energy Performance of Buildings According to Technical Standards UNI TS 11300:2008 Part 1 and Part 2—Case study—Building 4A—Input Data and Calculation Results—Version: January 2010-2. Milan, Italy: Italian Thermotechnic Committee. (in Italian)

    Google Scholar 

  • CTI (2010b). Calculation of Energy Performance of Buildings According to Technical Standards UNI TS 11300:2008 Part 1 and Part 2 —Case study—Building 5A—Input Data and Calculation Results—Version: January 2010-1. Milan, Italy: Italian Thermotechnic Committee. (in Italian)

    Google Scholar 

  • CTI (2012c). Calculation of Energy Performance of Buildings According to Technical Standards UNI TS 11300:2008 Part 1 and Part 2 —Case study—Building 1D—Input Data and Calculation Results—Version 04 of the 10th of May 2012. Milan, Italy: Italian Thermotechnic Committee. (in Italian)

    Google Scholar 

  • Cubasch U, Wuebbles D, Chen D, Facchini MC, Frame D, Mahowald N, Winther J-G (2013). Introduction. In: Stocker TF, Qin D, Plattner GK, Tignor M, Allen SK, Boschung J, Nauels A, Xia Y, Bex V, Midgley PM (eds), Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge, UK: Cambridge University Press.

    Google Scholar 

  • de Wilde P, Tian W (2010). Predicting the performance of an office under climate change: A study of metrics, sensitivity and zonal resolution. Energy and Buildings, 42: 1674–1684.

    Article  Google Scholar 

  • de Wilde P, Tian W (2012). Management of thermal performance risks in buildings subject to climate change. Building and Environment, 55: 167–177.

    Article  Google Scholar 

  • Design Builder Software (2014). ANSI/ASHRAE Standard 140-2011—Building Thermal Envelope and Fabric Load Tests—DesignBuilder Version 3.4 (incorporating EnergyPlus version 8.1.0). Clarendon Court, UK: Design Builder Software Ltd.

    Google Scholar 

  • Design Builder Software (2015a). EN 15265/ISO 13790 Standard (2008) —Tests for the Calculation of Energy Use for Space Heating and Cooling. Clarendon Court, UK: Design Builder Software Ltd.

    Google Scholar 

  • Design Builder Software (2015b). Design Builder Website. Available at http://www.designbuilder.co.uk. Accessed 30 Oct 2015.

    Google Scholar 

  • Diffenbaugh NS, Pal JS, Giorgi F, Gao X (2007). Heat stress intensification in the Mediterranean climate change hotspot. Geophysical Research Letters, 34(11): L11706.

    Article  Google Scholar 

  • Douglas (1992). The case for urban ecology. Urban Nature Magazine, 1: 15–17.

    Google Scholar 

  • ENEA (2013). Energy and Sustainable Economic Development (2013). Environment and Energy Report. Scenarios and Strategies 2013. Rome: Italian National Agency for New Technologies. (in Italian)

    Google Scholar 

  • EnergyPlus (2015). EnergyPlus simulation software website. Available at http://apps1.eere.energy.gov/buildings/energyplus. Accessed 30 Oct 2015.

    Google Scholar 

  • European Climate Adaptation Platform (2015). Thermal comfort. In: Urban Vulnerability Map book—Climatic Threats—Heat Waves—Exposure—Thermal Comfort. Available at http://climate-adapt.eea.europa.eu/tools/urban-adaptation/climatic-threats/heat-wav es/exposure. Accessed 30 Oct 2015.

    Google Scholar 

  • European Parliament (2010). Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the Energy Performance of Buildings (recast).

    Google Scholar 

  • Giorgi F (2006). Climate change hot-spots. Geophysical Research Letters, 33(8): L08707.

    Article  Google Scholar 

  • Giorgi F, Lionello P (2008). Climate change projections for the Mediterranean region. Global and Planetary Change, 63: 90–104.

    Article  Google Scholar 

  • Governament of Italy (2015). Ministerial Decree 26/06/2015. Application of methodologies for calculating the energy performance and defining minimum requirements of the buildings. (in Italian)

    Google Scholar 

  • Guan L (2009). Preparation of future weather data to study the impact of climate change on buildings. Building and Environment, 44: 793–800.

    Article  Google Scholar 

  • Gupta R, Gregg M (2012). Using UK climate change projections to adapt existing English homes for a warming climate. Building and Environment, 55: 20–42.

    Article  Google Scholar 

  • Henninger RH, Witte MJ (2010). EnergyPlus testing with building thermal envelope and fabric load tests from ANSI/ASHRAE Standard 140-2011. Arlington Heights, IL, USA: Gard Analytics.

    Google Scholar 

  • IPCC (2014). Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Geneva, Switzerland: Intergovernmental Panel on Climate Change.

    Google Scholar 

  • ISPRA (2015). SCIA—National system for the collection, processing and distribution of climatic data of environmental relevance. Italian National Institute for Environmental Protection and Research. Available at http://www.scia.isprambiente.it/home_new.asp. Accessed 30 Oct 2015. (in Italian)

    Google Scholar 

  • ISTAT (2012). Energy Balance—Final uses. Italian National Institute of Statistics Available at http://dati.istat.it/Index.aspx?DataSetCode= DCCV_BILENERG. Accessed 28 Oct 2015. (in Italian)

    Google Scholar 

  • ISTAT (2016). Population and housing census 2011. Italian National Institute of Statistics. Available at http://daticensimentopopolazione. istat.it/Index.aspx. Accessed 24 Mar 2016. (in Italian)

    Google Scholar 

  • Kalvelage K, Passe U, Rabideau S, Takle ES (2014). Changing climate: The effects on energy demand and human comfort. Energy and Buildings, 76: 373–380.

    Article  Google Scholar 

  • Kovats RS, Valentini R, Bouwer LM, Georgopoulou E, Jacob D, Martin E, Rounsevell M, Soussana J-F (2014). Europe. In: Barros VR, Field CB, Dokken DJ, Mastrandrea MD, Mach KJ, Bilir TE, Chatterjee M, Ebi KL, Estrada YO, Genova RC, Girma B, Kissel ES, Levy AN, MacCracken S, Mastrandrea PR, White LL (eds), Climate Change 2014: Impacts, Adaptation, and Vulnerability. Part B: Regional Aspects. Contribution of Working Group II to the Fifth Assessment Report of the Intergovernmental Panel of Climate Change. Cambridge, UK: Cambridge University Press. pp. 1267–1326.

    Google Scholar 

  • Kuglitsch FG, Toreti A, Xoplaki E, Della-Marta PM, Zerefos CS, Trke M, Luterbacher J (2010). Heat wave changes in the eastern Mediterranean since 1960. Geophysical Research Letters, 37(4): L04802.

    Article  Google Scholar 

  • LBNL (2013). EnergyPlus Documentation—Auxiliary EnergyPlus Programs. Berkeley, CA, USA: Lawrence Berkeley National Laboratory.

    Google Scholar 

  • Li DHW, Yang L, Lam JC (2012). Impact of climate change on energy use in the built environment in different climate zones—A review. Energy, 42: 103–112.

    Article  Google Scholar 

  • Lionello P, Abrantes F, Congedi L, Dulac F, Gacic M, Gomis D, Goodess C, Hoff H, Kutiel H, Luterbacher J, Planton S, Reale M, Schröder K, Vittoria Struglia M, Toreti A, Tsimplis M, Ulbrich U, Xoplaki E (2012). Introduction: Mediterranean Climate—Background Information. In: The Climate of the Mediterranean Region. Oxford, UK: Elsevier. pp. xxxv–xc.

    Google Scholar 

  • Matthies F, Bickler G, Marin NC, Hales S (2008). Heat-Health Action Plans: Guidance. Copenhagen, Denmark: World Health Organisation (WHO) Regional Office for Europe.

    Google Scholar 

  • McLeod RS, Hopfe CJ, Kwan A (2013). An investigation into future performance and overheating risks in Passivhaus dwellings. Building and Environment, 70: 189–209.

    Article  Google Scholar 

  • Nik VM, Sasic Kalagasidis A (2013). Impact study of the climate change on the energy performance of the building stock in Stockholm considering four climate uncertainties. Building and Environment, 60: 291–304.

    Article  Google Scholar 

  • Nocera M (2015). 55%–65% Tax Benefits for Energy Renovation of Existing Building Stock in 2013. Rome: Italian National Agency for New Technologies. (in Italian)

    Google Scholar 

  • Porritt SM, Cropper PC, Shao L, Goodier CI (2012). Ranking of interventions to reduce dwelling overheating during heat waves. Energy and Buildings, 55: 16–27.

    Article  Google Scholar 

  • Riva G, Murano G, Corrado V, Baggio P, Antonacci G (2012). Climatic national parameters update and national climate zoning for cooling energy certification—Report RdS/2012/106. Rome: Italian National Agency for New Technologies. (in Italian)

    Google Scholar 

  • Robert A, Kummert M (2012). Designing net-zero energy buildings for the future climate, not for the past. Building and Environment, 55: 150–158.

    Article  Google Scholar 

  • Timmerman J (2015). Map book urban vulnerability to climate change—Factsheets. Copenhagen, Denmark: European Environment Agency.

    Google Scholar 

  • UNFPA (1999). The State of World Population. New York: United Nations Population Fund.

    Google Scholar 

  • UNI (1994). UNI 10349. Heating and Cooling of Buildings—Climate Data. Milan, Italy: Italian National Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (1995). UNI 10339. Comfort Ventilation Systems. Milan, Italy: Italian National Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (2007). UNI EN ISO 10077-1. Thermal Performance of Windows, Doors and Shutters—Calculation of Thermal Transmittance— Part 1: General. Milan, Italy: Italian National Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (2008a). UNI EN ISO 15927. Hygrothermal Performance of Buildings—Calculation and Presentation of Climatic Data—Part 6: Accumulated Temperature Differences (degree-days). Milan, Italy: Italian National Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (2008b). UNI EN 15265. Thermal Performance of Buildings—Calculation of Energy Use for Space Heating and Cooling Using Dynamic Methods—General Criteria and Validation Procedures. Milan, Italy: Italian National Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (2008c). UNI EN ISO 13790. Energy Performance of Buildings—Calculation of Energy Use for Space Heating and Cooling. Milan, Italy: Italian national Association for Standardization. (in Italian)

    Google Scholar 

  • UNI (2014). UNI/TS 11300. Energy Performance of Buildings—Part 1: Evaluation of Energy Need for Space Heating and Cooling. Milan, Italy: Italian national Association for Standardization. (in Italian)

    Google Scholar 

  • van Hooff T, Blocken B, Hensen JLM, Timmermans HJP (2015). On the predicted effectiveness of climate adaptation measures for residential buildings. Building and Environment, 83: 142–158.

    Article  Google Scholar 

  • van Hooff T, Blocken B, Timmermans HJP, Hensen JLM (2016). Analysis of the predicted effect of passive climate adaptation measures on energy demand for cooling and heating in a residential building. Energy, 94: 811–820.

    Article  Google Scholar 

  • Waddicor DA, Fuentes E, Sisó L, Salom J, Favre B, Jiménez C, Azar M (2016). Climate change and building ageing impact on building energy performance and mitigation measures application: A case study in Turin, northern Italy. Building and Environment, 102: 13–25.

    Article  Google Scholar 

  • Wang H, Chen Q (2014). Impact of climate change heating and cooling energy use in buildings in the United States. Energy and Buildings, 82: 428–436.

    Article  Google Scholar 

  • WHO (2003). The health impacts of 2003 summer heat-waves. Briefing note for the delegations of the fifty-third session of the WHO Regional Committee for Europe. Paper presented at the 53th session of the WHO Regional Committee for Europe.

    Google Scholar 

  • Zhai Z, Johnson M-H, Krarti M (2011). Assessment of natural and hybrid ventilation models in whole-building energy simulations. Energy and Buildings, 43: 2251–2261.

    Article  Google Scholar 

  • Zhu D, Hong T, Yan D, Wang C (2013). A detailed loads comparison of three building energy modeling programs: EnergyPlus, DeST and DOE-2.1E. Building Simulation, 6: 323–335.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Architecture, University of Florence, Via San Niccolò 93, Florence, Italy

    Leone Pierangioli

  2. Department of Industrial Engineering, University of Florence, Via San Niccolò 93, Florence, Italy

    Gianfranco Cellai

  3. Department of Agri-food Production and Environmental Sciences, University of Florence, Piazzale delle Cascine 18, Florence, Italy

    Roberto Ferrise, Giacomo Trombi & Marco Bindi

Authors
  1. Leone Pierangioli
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Gianfranco Cellai
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Roberto Ferrise
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Giacomo Trombi
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Marco Bindi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Leone Pierangioli.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pierangioli, L., Cellai, G., Ferrise, R. et al. Effectiveness of passive measures against climate change: Case studies in Central Italy. Build. Simul. 10, 459–479 (2017). https://doi.org/10.1007/s12273-016-0346-8

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12273-016-0346-8

Keywords

Search

Navigation