Abstract
Natural ventilation is an effective method to save energy required to condition buildings and to improve indoor air quality. Designing a naturally ventilated building is a greater challenge than designing a mechanically ventilated building because natural ventilation highly depends on weather, which changes continuously. Another factor that may alter air movement and thermal conditions in the building is the presence of heat loads and furniture. The objective of the current study is to examine the effects of various environmental conditions and room configurations on both airflow distribution and thermal conditions in a room. In this study computational fluid dynamics (CFD) was used to model single-sided buoyancy-driven ventilation in a room with a door. Experimental and numerical data from the literature were used to initially validate the CFD, and the results agreed fairly well. Various heat loads and furniture were added to the room to examine their effects on airflow stratification and thermal conditions. Overall, the conditions in a room were not significantly affected by additional heat sources. Lastly, cooler ambient conditions at the doorway were modeled, and the room was unable to achieve comfortable thermal conditions.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Allocca C, Chen Q, Glicksman LR (2003). Design analysis of single-sided natural ventilation. Energy and Buildings, 35: 785–795.
Ansys (2009). ANSYS FLUENT 12.0 User’s Guide. Canonsburg, PA, USA: Ansys Inc.
ASHRAE (2010). ASHRAE Standard 55-2010 Thermal Environment Standards for Human Occupancy. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air Conditioning Engineers.
Awbi HB (2003). Ventilation of Buildings, 2nd edn. London: Spon Press.
Brodrick JR, Westphalen D (2001). Uncovering auxiliary energy use. ASHRAE Journal, 43(2): 58.
Cheuong JOP, Liu CH (2011). CFD simulations of natural ventilation behaviour in high-rise buildings in regular and staggered arrangements at various spacings. Energy and Buildings, 43: 1149–1158.
Cho YJ, Awbi HB (2007). A study of the effect of heat source location in a ventilated room using multiple regression analysis. Building and Environment, 42: 2072–2082.
Chow WK, Li J (2007). Numerical simulations on thermal plumes with k-ɛ types of tubulence models. Building and Environment, 42: 2819–2828.
El-Agouz SA (2008). The effect of internal heat source and opening locations on environmental natural ventilation. Energy and Buildings, 40: 409–418.
Emmerich SJ, Dols WS, Axley JW (2001). Natural Ventilation Review and Plan for Design and Analysis Tools. National Institue of Standards Technology, NISTIR 6781.
Feng J, Xu Z, Jie Y (2008). Natural ventilation potential analysis of office building in China. Journal of Tongji University, 36(1): 92–96.
Gan G (2000). Effective depth of fresh air distribution in rooms with single-sided natural ventilation. Energy and Buildings, 31: 65–73.
Incropera FP, De Witt DP, Bergman TL, Lavine AS (2007). Fundamentals of Heat and Mass Transfer, 6th edn. New York: John Wiley and Sons.
invent hp (2007). Quickspecs. HP L1908w 19-inch Widescreen LCD Monitor.
Kaye NB, Hunt GR (2010). The effect of floor heat source area on the induced airflow in a room. Building and Environment, 45: 839–847.
Kenmore (2010). Compact Refrigerator: 46-94683/9. Sears Commercial.
Larsen TS, Heiselberg P (2008). Single-sided natural ventilation driven by wind pressure and temperature difference. Energy and Buildings, 40: 1031–1040.
Mahajan BM (1987). Measurement of interzonal heat and mass transfer by natural convection. Solar Energy, 38: 437–466.
Patankar SV (1980). Numerical Heat Transfer and Fluid Flow. New York: Hemisphere Publishing.
Ravikumar P, Prakash D (2009). Analysis of thermal comfort in an office room by varying the dimensions of the windows on adjacent walls using CFD: A case study based on numerical simulation. Building Simulation, 2: 187–196.
RIBA Royal Institue of British Architects (2014). Available at http://www.architecture.com/SustainabilityHub/Designstrategies/Air/1-2-1-2-Naturalventilation-stackventilation.aspx.
Roache PJ (1994). Perspective: A method for uniform reporting of grid refinement studies. ASME Journal of Fluids Engineering, 116:405–413.
Schaelin A, Moser A, van der Mass J (1992). Simulation of airflow through large openings in buildings. ASHRAE Transactions, 98(2):319–328.
Starakakis GM, Vrachopoulos MGr, Markatos NC, Koukou MK (2008). Natural cross-ventilation in buildings: Building-scale experiments, numerical simulation and thermal comfort evaluation. Energy and Buildings, 40: 1666–1681.
Stoakes P, Battaglia F, Passe U (2011a). Predicting natural ventilation flows in whole buildings. Part 1: The Viipuri Library. Building Simulation, 4: 263–276.
Stoakes P, Battaglia F, Passe U (2011b). Predicting natural ventilation flows in whole buildings. Part 2: The Esherick House. Building Simulation, 4: 365–377.
U.S. Department of Energy (2008). Annual Energy Review 2007.
U.S. Energy Information Administration (2013). International Energy Outlook 2013.
van der Mass J (1992). Air flow through large openings in buildings. Energy Conservation in Buildings and Community Systems Programme Annex 20 Technical Report (Subtask 2: Air Flows between Zones).
Villi G, Pasut W, De Carli M (2009). CFD modeling and thermal performance analysis of a wooden ventilated roof structure. Building Simulation, 2: 215–228.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, D., Battaglia, F. Effect of heat loads and ambient conditions on thermal comfort for single-sided ventilation. Build. Simul. 8, 167–178 (2015). https://doi.org/10.1007/s12273-014-0200-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-014-0200-9