Abstract
PLGA scaffolds were prepared using a nano-composite deposition system (NCDS). 5-Fluorouracil (5-FU) was used as a model drug. Hydroxyapatite (HA) was included in the scaffolds to improve the mechanical properties of the scaffolds and modulate the release of 5-FU from the scaffolds. 5-FU and HA were dispersed well in the prepared scaffolds when evaluated with SEM, FT-IR, XRPD and DSC. The release of 5-FU from the prepared scaffolds consisting of different compositions was determined using 40 mL PBS as the medium. The release profiles of 5-FU from PLGA scaffolds followed the typical triphasic release pattern. The addition of HA to the compositions increased the release rate of 5-FU from the scaffolds and improved the mechanical properties of the scaffolds, while it retarded the degradation of PLGA. Therefore, NCDS could be a good system to prepare polymeric implants of various shapes with different drug release patterns.
Similar content being viewed by others
References
Agrawal, C. M. and Athanasiou, K. A., Technique to control pH in vicinity of biodegrading PLA-PGA implants. J. Biomed. Mater. Res., 38, 105–114 (1997).
Ahmed, A., Bonner, C., and Desai, T. A., Bioadhesive microdevices with multiple reservoirs: a new platform for oral drug delivery. J. Controlled Release, 81, 291–306 (2002).
Chasin, M. and Langer, R., Biodegradable Polymers as Drug Delivery Systems, Marcel Dekker, New York, (1990).
Chiang, C.-H., Tung, S.-M., Lu, D.-W., and Yeh, M.-K., In vitro and in vivo evaluation of an ocular delivery system of 5-fluorouracil microspheres. J. Ocul. Pharmacol. Ther., 17, 545–553 (2001).
Chu, W. S., Kim, S. G., Ahn, S. H., Ha, W. S., and Chi, S. C., Micro/nano fabrication technique in drug delivery system (DDS). J. Kor. Soc. Prec. Eng., 23, 21–29 (2006).
Desai, T. A., Chu, W. H., Tu, J. K., Beattie, G. M., Hayek, A., and Ferrari, M., Microfabricated immunoisolating biocapsules. Biotechnol. Bioeng., 57, 118–120 (1998).
Dorta, M. J., Oliva, A., Munguia, O., Llabres, M., and Farina, J. B., In-vitro release of fluoropyrimidines from PLGA film implants. J. Pharm. Pharmacol., 54, 757–763 (2002).
Fialho, S. L. and Cunha, A. da S., Manufacturing Techniques of biodegradable implants intended for intraocular application. Drug Deliv., 12, 109–116 (2005).
Imai, Y., Fukuzawa, A., and Watanabe, M., Effect of blending tricalcium phosphate on hydrolytic degradation of a block polyester containing poly(L-lactic acid) segment. J. Biomater. Sci. Polymer Edn., 10, 773–786 (1999).
Kim, J. M., Seo, K. S., Jeong, Y. K., Lee, H. B., Kim, Y. S., and Khang, G., Co-effect of aqueous solubility of drugs and glycolide monomer on in vitro release rates from poly(D,L-lactide-co-glycolide) discs and polymer degradation. J. Biomater. Sci. Polymer Edn., 16, 991–1007 (2005).
Kothapalli, C. R., Shaw, M. T., and Wei, M., Biodegradable HA-PLA 3-D porous scaffolds: Effect of nano-sized filler content on scaffold properties. Acta Biomater., 1, 653–662 (2005).
Leong, K. W., Kost, J., Mathiowitz, E., and Langer, R., Polyanhydries for controlled release of bioactive agents. Biomaterials, 7, 364–371 (1986).
Lu, Y. and Chen, S. C., Micro and nano-fabrication of biodegradable polymers for drug delivery. Adv. Drug Deliv. Rev., 56, 1621–1633 (2004)
Park, T. G., Lee, H. Y., and Nam, Y. S., A new preparation method for protein loaded poly(-lactic-co-glycolic acid) microspheres and protein release mechanism study. J. Controlled Release, 55, 181–191 (1998).
Reed, M. L., Wu, C., Kneller, J., Watkins, S., Vorp, D. A., Nadeem, V., Weiss, L. E., Rebello, K., Mescher, M., Smith, A. J. C., Rosenblum, W., and Feldman, M. D., Mcromechanical devices for intravascular drug delivery. J. Pharm. Sci., 87, 1387–1394 (1998).
Santini J.T, Jr., Richards, A. C., Scheidt, R., Cima, M. J., and Langer, R., Microchips as controlled drug-delivery devices. Angew. Chem. Int. Ed., 39, 2396–2407 (2000).
Thomson, R. C., Yaszemski, M. J., Powers, J. M., and Mikos, A. G., Hydroxyapatite fiber reinforced poly(α-hydroxy ester) foams for bone regeneration. Biomaterials, 19, 1935–1943 (1998).
Verheyen, C. C. P. M., De Wijn, J. R., Van Blitterswijk, C. A., and De Groot, K., Evaluation of hydroxylapatite/poly(L-lactide) composites: mechanical behavior. J. Biomed. Mater. Res., 26, 1277–1296 (1992).
Vogelhuber, W., Rotunno, P., Magni, E., Gazzaniga, A., Spruss, T., Bernhardt, G., Buschauer, A., and Goepferich, A. Programmable biodegradable implants. J. Controlled Release, 73, 75–88 (2001).
Zheng, X., Zhou, S., Li, X., and Weng, J. Shape memory properties of poly(D,L-lactide)/hydroxyapatite composites. Biomaterials, 27, 4288–4295 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, JH., Ha, WS., Chu, WS. et al. Preparation of micro-fabricated biodegradable polymeric structures using NCDS. Arch. Pharm. Res. 31, 125–132 (2008). https://doi.org/10.1007/s12272-008-1130-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12272-008-1130-9