Abstract
In this study, the crash-worthiness of a regular Centurion 2M barrier, which is a type of portable water-filled barrier (PWFB), is evaluated under different collision conditions. A numerical model of the regular Centurion 2M barrier, consisting of a plastic shell and water, was developed and validated. The validity of the numerical model is demonstrated by comparisons to experimental results. During the establishment of the finite element numerical model, the ALE (Arbitrary Lagrange-Euler) method was used to solve the problem of the fluid-structure interaction of the PWFB system. This model can be extended to a series of impact cases including an actual pick-up truck. Impact cases set six collision conditions according to different collision speeds and angles. The dynamic response of the collision between the pick-up truck and the PWFB process was investigated. From the analysis, we find that the greater the collision angle is, the greater the impact is on the collision result. According to the actual accident collision angle, setting the collision angle above 50° is satisfactory in most situations. In addition, a regular Centurion 2M barrier is just suitable for use on roads when the speed of vehicles is 20 km/h or less.
Similar content being viewed by others
Abbreviations
- PWFB:
-
portable water-field barrier
- ALE:
-
arbitrary lagrange-euler
- MDPE:
-
medium density polyethylene
- SPH:
-
smoothed particle hydrodynamic
References
Abraham, N., Ghosh, B., Simms, C., Thomson, R. and Amato, G. (2016). Assessment of the impact speed and angle conditions for the EN1317 barrier tests. Int. J. Crashworthiness 21, 3, 211–221.
Albuquerque, F. D. B., Sicking, D. L. and Stolle, C. S. (2010). Roadway departure and impact conditions. Transportation Research Record: J. Transportation Research Board 2195, 1, 106–114.
Belytschko, T., Lin, J. I. and Tsay, C. H. (1984). Explicit algorithms for the nonlinear dynamics of shells. Computer Methods in Applied Mechanics and Engineering 42, 2, 225–251.
Brinkman, C. P. and Mak, K. K. (1986). Accident Analysis of Highway Narrow Bridge Sites. Public Roads 49.
CEN European Committee for Standardization (CECS) (2010). BS EN1317-2:2010-Road Restraint Systems. Performance Classes, Impact Test Acceptance Criteria and Test Methods for Safety Barriers including Vehicle Parapets.
Lobo, H. (2007). Methodology for selection of material models for plastics impact simulation. International Ls.
Espino, D. M., Shepherd, D. E. and Hukins, D. W. (2014). Evaluation of a transient, simultaneous, arbitrary Lagrange-Euler based multi-physics method for simulating the mitral heart valve. Computer Methods in Biomechanics and Biomedical Engineering 17, 4, 450–458.
European Committee for Standardization (ECS) (1998). European Standard EN 1317: Road Restraint Systems. In: Part 1–5, BSI Group and Standards Policy and Strategy Committee, Brussels.
Hallquist, J. O. (2007). LS-DYNA Keyword User Manual Version 971. Livermore, California.
Hammonds, B., Burbridge, A., O’Callaghan, N., Cassar, D and Troutbeck, R. (2012). Observation on performance of plastics water-filled barrier type device. 25th ARRB Conf., Perth, Australia.
Kim, D., Kang, T., Soh, M., Kwon, J., Hwang, T. and Hwang, J. (2016). Estimation of lateral offset and drift angle for application in secondary collision avoidance system. Int. J. Automotive Technology 18, 1, 137–146.
Klasztorny, M., Nycz, D. B. and Szurgott, P. (2016). Modelling and simulation of crash tests of N2-W4-A category safety road barrier in horizontal concave arc. Int. J. Crashworth 21, 6, 644–659.
Kuhl, E., Hulshoff, S. and De Borst, R. (2003). An arbitrary Lagrangian Eulerian finite-element approach for fluid-structure interaction phenomena. Int. J. Numerical Methods in Engineering 57, 1, 117–142.
Mak, K. K. and Mason, R. L. (1980). Accident Analysis: Breakaway and Nonbreakaway Poles Including Sign and Light Standards Along Highways. DOT-HS-5-01266.
Miao, S. (2018). On the formation of shock for quasilinear wave equations with weak intensity pulse. Annals of PDE 18, 4(1), 10.
Naing, C. L., Hill, J., Thomson, R., Fagerlind, H., Kelkka, M. and Klootwijk, C. (2008). Single-vehicle collisions in Europe: Analysis using real-world and crash-test data. Int. J. Crashworthiness 13, 2, 219–229.
NCHRP Report 350 (1993). Recommended Procedures for the Safety Performance Evaluation of Highway Features. National Academy Press. Washington District of Colombia.
Ohayon, R. and Soize, C. (2015). Vibration of structures containing compressible liquids with surface tension and sloshing effects. Reduced-order model. Computational Mechanics 55, 6, 1071–1078.
Peng, Y., Li, R., Li, G. B., Yang, X. M. and Zhou, D. (2015). Method for investigation of child occupant impact dynamics based on real-world accident. Int. J. Automotive Technology 16, 5, 791–797.
Peng, Y., Wang, X., Peng, S., Huang, H., Tian, G. and Jia, H. (2018). Investigation on the injuries of drivers and copilots in rear-end crashes between trucks based on real world accident data in China. Future Generation Computer Systems, 86, 1251–1258.
RISER Consortium (2005). European Best Practice for Roadside Design: Guidelines for Roadside Infrastructure on New and Existing Roads.
Road & Maritimes Services New South Wales (RMSNSW) (2012). Safety Barrier Products Accepted for Use on Classified Roads in NSW, In: Safety Barrier Products (System — Temporary) Accepted for Use on Classified Roads in NSW, State Government New South Wales Sydney.
Shin, Y. S., Lee, M., Lam, K. Y. and Yeo, K. S. (1998). Modeling mitigation effects of watershield on shock waves. Shock and Vibration 5, 4, 225–234.
Thiyahuddin, M. I., Gu, Y. T., Gover, R. B. and Thambiratnam, D. P. (2014a). Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA. Engineering Analysis with Boundary Elements, 42, 26–36.
Thiyahuddin, M. I., Gu, Y. T., Thambiratnam, D. P. and Thilakarathna, H. M. (2014b). Impact and energy absorption of portable water-filled road safety barrier system fitted with foam. Int. J. Impact Engineering, 72, 26–39.
Tomasch, E., Hoschopf, H., Gobald, M., Steffen, H., Nadler, B., Nadler, F., Strnad, B. and Schneider, F. (2010). Single vehicle run-off-road accidents colliding turned down terminals of guardrails. Berichte Bundesanstalt Straßenwesen. Unterreihe Fahrzeugtech, Wirtschaftsverlag NW.
Torre, F., Domenichini, L., Meocci, M., Nocentini, A. and Morano, S. G. (2015). Evaluation of the vehicle/safety barrier/sign support interaction by means of FEM simulations. Int. J. Crashworthiness 20, 2, 123–133.
Torre, F., Erginbas, C., Thomson, R., Amato, G., Pengal, B. and Stefan, C. (2014). SAVeRS Project D1.1 Report, Defining the Different Parameters Which Can Influence the Need and Selection of VRS.
Veldman, A. E. P., Gerrits, J., Luppes, R., Helder, J. A. and Vreeburg, J. P. B. (2007). The numerical simulation of liquid sloshing on board spacecraft. J. Computational Physics 224, 1, 82–99.
Wijnen, W., Mesken, J. and Vis, M. A. (2010). Effectiviteit en Kosten van Verkeersveiligheidsmaatregelen. Stichting Wetenschappelijk Onderzoek Verkeersveiligheid SWOV.
Zaouk, A. K., Bedewi, N. E. and Marzougui, D. (1997). Development and evaluation of a C-1500 pickup truck model for roadside hardware impact simulation. Proc. FHWA Vehicle Crash Analysis Conf., FHWA-RD-96-212.
Acknowledgement
The work was supported from the National Natural Science Foundation of China (51405517, U1334208), the Natural Science Foundation of Hunan (2015JJ3155) and the Innovation-Driven Project of Central South University (No. 2018CX021).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Yuan, D., Luo, Y. & Peng, Y. Research on the Crashworthiness of Regular Centurion 2M Barrier Based on the Arbitrary Lagrange-Euler Method. Int.J Automot. Technol. 20, 549–558 (2019). https://doi.org/10.1007/s12239-019-0052-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-019-0052-5