Performance Evaluation of Ball CVT and Comparison with Half Toroidal CVT
- 135 Downloads
This study aims at finding an analytical model of ball continuously variable transmission (B-CVT) behavior and performance, based on the existing model of the half-toroidal traction drive. The geometrical and kinematical aspects of this model have been found. Then, force-moment equilibrium equations have been applied for a B-CVT. The contact behavior has been modeled using the isothermal elastohydrodynamic lubrication (EHL) theory, and spin and relative slip losses have been estimated for this CVT. Finally, the overall efficiencies of the B-CVT have been analyzed and compared with the halftoroidal traction drive. This study results have shown that B-CVT has higher torque efficiency and lower speed efficiency in comparison with half-toroidal CVT. Also, it has shown that the adjustment of axial forces in B-CVT leads to higher efficiency in lower input torques.
Key wordsBall CVT Half toroidal CVT Traction Efficiency Spin loss
Unable to display preview. Download preview PDF.
- Brewe, D. E. and Hamrock, B. J. (1976). Simplified solution for point contact deformation between two elastic solids. Lubrication Technology, 485–487.Google Scholar
- Ghariblu, H., Behroozirad, A. and Madandar, A. (2014). Traction and efficiency performance of ball type CVTs. Int. J. Automotive Engineering 4, 2.Google Scholar
- Gu, H.-L., Ho, H.-C., Wu, M.-C., Tzeng, S.-C. and Lin, Y.-J. (2012). Speed Adjusting Mechanism for Roller Traction Toroidal Continuously Variable Transmission. Google Patents. US Patents. US8287424 B2.Google Scholar
- Li, Q., Wu, J., Li, H. and Yao, J. (2015). A Mathematical method for eliminating spin losses in Toroidal traction drives. Mathematical Problems in Engineering, 2015, 1–10.Google Scholar
- Sharif, K., Evans, H., Snidle, R. and Newall, J. (2003). Modelling of film thickness and traction in a variable ratio traction drive rig. Proc. ASME Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf., Chicago, Illinois, USA.Google Scholar
- SKF Group Technical Documentation (1983). RIV-SKF industrie s.p.a., Quaderni di formazione, i cuscinetti volventi, Technical Report, San Torino, Italy.Google Scholar
- Tanaka, H., Toyoda, N., Machida, H. and Imanishi, T. (2004). Development of a 6 power-roller half-toroidal CVT-mechanism and efficiency. Int. Continuously Variable and Hybrid Transmission Cong., UC Davis.Google Scholar
- Ullman, D. (1989). Optimal design of traction drive continuously variable transmissions. J. Mechanical Design 111, 2, 264–269.Google Scholar