Abstract
Automotive brake noise has become a stubborn problem as automotive cars achieve higher driving torques, since that the increased torque induces the generation of severe noise dissipation during brake operation. Moreover, the global brake tuning market for achieving higher performance of the vehicle has expanded recently. The need to control the noise grows more in this connection. The tuning brake kits have employed cross-drilled and slotted machining pattern on the surface of the rotor. These designs have advantages to improve air ventilation, temperature control, and surface cleaning of brake pad. However, the effects of modal frequency by patterned rotor surfaces are rarely discussed, even if it is highly related with brake squeal phenomenon. Therefore, this study deals with the relationship between patterned surfaces and brake squeal through the numerical methods. The commercial software of a finite element analysis is employed for calculation by varying geometric design factors of each rotor pattern. As a result, the cross-drilled machining patterns are concluded to be an influential factor for in-plane mode frequency while the slotted patterns have more leverage for out-of-plane mode frequency.
Similar content being viewed by others
References
Arroyo, J. and Zapata, J. (1998). Subspace iteration search method for generalized eigenvalue problems with sparse complex unsymmetric matrices in finite-element analysis of waveguides. IEEE Trans. Microwave Theory and Techniques 46, 8, 1115–1123.
Baker, A. and Ouyang, H. (2004). Contact Pressure Distributions by Simulated Structural Modifications. Braking 2004: Vehicle Braking and Chassis Control. John Wiley & Sons, Inc. Hoboken, New Jersey, USA.
Bennighof, J. and Lehoucq, R. (2004). An automated multilevel substructuring method for eigenspace computation in linear elastodynamics. SIAM J. Scientific Computing 25, 6, 2084–2106.
Brandl, S., Biermayer, W., Graf, B. and Resch, T. (2016). Hybrid vehicle’s NVH challenges and influences on the NVH development. SAE Paper No. 2016-01-1837.
Carvajal, S., Wallner, D., Helfrich, R. and Klein, M. (2016). Excellent brake NVH comfort by simulation — Use of optimization methods to reduce squeal noise. SAE Paper No. 2016-01-1779.
Chen, F., Mckillip, D., Luo, J. and Wu, S. (2004). Measurement and analysis of rotor in-plane mode induced disc brake squeal and beyond. SAE Paper No. 2004-01-2798.
da Silva, J., Fulco, E., Varante, P. and do Nascimento, V., Diesel, F. N. and Boniatti, D. L. (2013). Numerical and experimental evaluation of brake squeal. SAE Paper No. 2013-36-0030.
Hu, Y. and Nagy, L. (1997). Brake squeal analysis by using nonlinear transient finite element method. SAE Paper No. 971510.
Lanczos, C. (1950). An iteration method for the solution of the eigenvalue problem of linear differential and integral operators. J. Research of the National Bureau of Standards 45, 4, 255–282.
Nishiwaki, M. (1993). Generalized theory of brake noise. Proc. Institution of Mechanical Engineers, Part D: J. Automobile Engineering 207, 3, 195–202.
Ouyang, H., Nack, W., Yuan, Y. and Chen, F. (2005). Numerical analysis of automotive disc brake squeal: A review. Int. J. Vehicle Noise and Vibration 1, 3–4, 207–231.
Papinniemi, A., Zhao, J., Stanef, D. and Ding, J. (2005). An investigation of in-plane vibration modes in disc brake squeal noise. SAE Paper No. 2005-01-3923.
Qatu, M. S. (2012). Recent research on vehicle noise and vibration. Int. J. Vehicle Noise and Vibration 8, 4, 289–301.
Rahman, A., Arsyad, M., Hamid, M., Lazim, M. and Razimi, A. (2016). The road particle effect on squeal noise of disc braking system. Applied Mechanics and Materials, 819, 563–568.
Soedel, W. (1993). Vibrations of Shells and Plates. 2nd edn. Marcel Dekker. New York, USA.
Yang, M., Afaneh, A. and Blaschke, P. (2003). A study of disc brake high frequency squeals and disc in-plane/out-of-plane modes. SAE Paper No. 2003-01-1621.
Yang, M. and Afeneh, A. (2004). Investigation of mounted disc brake in-plane and out-of-plane modes in brake squeal study. IMAC-XXII: Conf. & Exposition on Structural Dynamics, Dearborn, Michigan.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jung, T., Hong, Y., Park, S. et al. Numerical Study for Brake Squeal by Machining Patterns on Frictional Surface. Int.J Automot. Technol. 19, 281–289 (2018). https://doi.org/10.1007/s12239-018-0027-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-018-0027-y