Skip to main content
SpringerLink
Log in

Active coolant control strategies in automotive engines

  • Published:
International Journal of Automotive Technology Aims and scope Submit manuscript

Abstract

The coolant flow rate in conventional cooling systems in automotive engines is subject to the mechanical water pump speed, and high efficiency in terms of fuel economy and exhaust emission is not possible given this limitation. A new technology must be developed for engine cooling systems. The electronic water pump is used as a substitute for the mechanical water pump in new engine cooling systems. The new cooling system provides more flexible control of the coolant flow rate and engine temperature, which previously relied strongly on engine driving conditions such as load and speed. In this study, the feasibility of two new cooling strategies was investigated using a simulation model that was validated with temperatures measured in a diesel engine. Results revealed that active coolant control using an electronic water pump and valves substantially contributed to a reduction of coolant warm-up time during cold engine starts. Harmful emissions and fuel consumption are expected to decrease as a result of a reduction in warm-up time.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Ap, N., Guerrero, P., Jouanny, P., Potier, M., Genoist, J. and Thuez, J. L. (2003). Ultimate Cooling New Cooling System Concept Using the Same Coolant to Cool All Vehicle Fluids. IMechE. 661–674.

  • Ap, N. and Tarquis, M. (2005). Innovative engine cooling systems comparison. SAE Paper No. 2005-01-1378.

  • Chanfreau, M., Gessier, B., Farkh, A. and Geels, P. Y. (2003). The need for an electrical water valve in a thermal management intelligent system (THEMIS TM). SAE Paper No. 2003-01-0274.

  • Chalgren, R. D. (2003). Development and verification of a heavy duty 42/14V electric powertrain cooling system. SAE Paper No. 2003-01-3416.

  • Chalgren, R. D. (2004). Thermal comfort and engine warm-up optimization of a low-flow advanced thermal management system. SAE Paper No. 2004-01-0047.

  • Cho, H., Jung, D. and Assanis, D. N. (2005). Control strategy of electric coolant pump for fuel economy improvement. Int. J. Automotive Technology 6,3, 269–275.

    Google Scholar 

  • Cho, H., Jung, D., Filipi, Z. S., Assanis, D. N., Vanderslice, J. and Bryzik, W. (2007). Application of controllable electric coolant pump for fuel economy and cooling performance improvement. J. Engineering for Gas Turbines and Power, 129, 239–244.

    Article  Google Scholar 

  • Hnatczuk, W., Michael, P., Bishop, L. J. and Goodell, J. (2000). Parasitic loss reduction for 21st century trucks. SAE Paper No. 2000-01-3423.

  • Kim, K., Hwang, K., Lee, K. and Lee, K. (2009). Investigation of coolant flow distribution and the effects of cavitation on water pump performance in an automotive cooling system. Int. J. Energy Research, 33, 224–234.

    Article  Google Scholar 

  • Kruger, U., Edwards, S., Pantow, E., Lutz, R., Dreisbach, R. and Glensvig, M. (2008) High performance cooling and EGR systems as a contribution to meeting future emission standards. SAE Paper No. 2008-01-1199.

  • Najt, P. M. and Foster, D. E. (1983). Compression-ignited homogeneous charge combustion. SAE Paper No. 830264.

  • Noguchi, M., Tanaka, Y., Tanaka, T. and Takeuchi, Y. (1979). A study on gasoline engine combustion by observation of intermediate reactive products during combustion. SAE Paper No. 790840.

  • Onishi, S., Jo, S. H., Shoda, K., Jo, P. D. and Katao, S. (1979). Active thermo-atmosphere combustion (ATAC) — A new combustion process for internal combustion engines. SAE Paper No. 790501.

  • Page, R. W., Hnatczuk, W. and Kozierowski, J. (2005). Thermal management for the 21st century-Improved thermal control & fuel economy in an army medium tactical vehicle. SAE Paper No. 2005-01-2068.

  • Vegenas, A., Hawley, J. G., Brace, C. J. and Ward, M. C. (2004). On-vehicle controllable cooling jets. SAE Paper No. 2004-01-0049.

  • Vetrovec, J. (2008). Engine cooling system with a heat load averaging capability. SAE Paper No. 2008-01-1168.

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Hanyang University, Gyeonggi, 426-791, Korea

    K. B. Kim, K. W. Choi & K. H. Lee

  2. Department of Mechanical Engineering, Hanyang University, Seoul, 133-070, Korea

    K. S. Lee

Authors
  1. K. B. Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. K. W. Choi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. K. H. Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. K. S. Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to K. H. Lee.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kim, K.B., Choi, K.W., Lee, K.H. et al. Active coolant control strategies in automotive engines. Int.J Automot. Technol. 11, 767–772 (2010). https://doi.org/10.1007/s12239-010-0091-4

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12239-010-0091-4

Key Words

Search

Navigation