Abstract
This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured. Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors that can be controlled independently is designed. The performance of the proposed control methods is verified using a full model vehicle simulation and scaled-down vehicle experiment.
Similar content being viewed by others
References
An, S. J., Lee, H. Y., Cho, W. K., Jung, G., Yi, K. and Lee, K. (2006). Development of steering algorithm for 6WS military vehicle and verification by experiment using a scale-down vehicle. Proc. Int. Symp. Advanced Vehicle Control, 245–250.
Chen, B. C., Yu, C. C. and Hus, W. F. (2006). Optimal steering control for six-wheeled vehicle. Proc. Int. Symp. Advanced Vehicle Control 2006, 605–610.
Huh, K., Kim, J. and Hong, J. (2000). Handling and driving characteristics for six-wheeled vehicle. Proc. Institution of Mechanical Engineers, Part D, J. Automobile Engineering 214,2, 159–170.
Infineon Technologies AG (2003). C167CR Derivatives User’s Manual. Infineon Technologies AG.
Jacson, A. and Crolla, D. (2002). Improving performance of a 6×6 off-road vehicle through individual wheel control. SAE Paper No. 2002-01-0968, 2002.
Jung, G. H. and Lee, K. (2005). Design of independent 6 wheel drive and steering test model vehicle. Fall Conf. Proc., Korean Society Automotive Engineers, 2, 1156–1161.
Nagai, M., Yamanak, S. and Hirano, Y. (1999). Integrated control of active rear wheel steering and yaw moment control using braking forces. JSME Int. J., Series C 42,2, 301–308.
Nagai, M., Shino, M. and Feng, Gao. (2002). Study on integrated control of active front steer angle and direct yaw moment. JSAE Review, 23, 309–315.
Pacejka, H. B. (2002). Tyre and Vehicle Dynamics. Butterworth Heinemann. Bosto. Massachusetts.
Shibahata, Y., Shimada, K., and Tomari, T. (1992). The improvement of vehicle maneuverability by direct yaw moment control. Proc. Int. Symp. Advanced Vehicle Control, 452–457.
Shino, M. and Nagai, M. (2001). Yaw-moment control of electric vehicle for improving handling and stability. JSAE Review, 22, 473–480.
Song, J. H., Kim, H. S. and Kim, B. S. (2007) Vehicle longitudinal and lateral stability enhancement using a TCS and yaw motion controller. Int. J. Automotive Technology 8,1, 49–57.
Gillespie, T. D. (1992). Fundamentals of Vehicle Dynamics, SAE.
Zanten, A. T. V., Erhardt, R., Landesfeind, K. and Pfaff, G. (1998). VDC systems development and perspective. SAE Paper No. 980235.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
An, S.J., Yi, K., Jung, G. et al. Desired yaw rate and steering control method during cornering for a six-wheeled vehicle. Int.J Automot. Technol. 9, 173–181 (2008). https://doi.org/10.1007/s12239-008-0022-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-008-0022-9