Skip to main content
SpringerLink
Log in

Investigation of the Synergistic Effect of Addition the Hybrid Carbon Fiber, Graphene Nanoplatelet and Matrix Modifier to Poly(phenylene sulphide) on Physical Properties

  • Published:
Fibers and Polymers Aims and scope Submit manuscript

Abstract

This study aims to investigate the effect of graphene nanoplatelet (GNP) and terpolymer addition on the mechanical, adhesive wear and thermal properties of carbon fiber (CF) reinforced poly(phenylene sulphide) (PPS) matrix composites. In the composites the CF content was fixed at 10 wt.% and the terpolymer content at 2 wt.%, while the GNP content was changed to 0.1, 0.3 and 0.5 wt.%. Physical properties of composites were evaluated by using tensile test, adhesive wear test, differential scanning calorimeter analysis and scanning electron microscopy analysis. As a result, it was concluded that the simultaneously addition of both 0.5 wt.% GNP and 2 wt.% terpolymer to CF reinforced composites improved the mechanical and tribological properties of composites. Thus, a solution has been developed to increase the efficiency of use of high performance composite materials produced for use in areas requiring good mechanical and tribological performance such as the aerospace and automotive industries.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. X. Yingkai, Z. Shu, Z. Zhao, Y. Muhuo, and Y. Xiangkai, J. Wuhan Univ. Technol., 32, 1318 (2017).

    Article  CAS  Google Scholar 

  2. Y. Wu, Q. Liu, Z. Heng, H. Zou, Y. Chen, and M. Liang, Polym. Compos., 40, 3866 (2019).

    Article  CAS  Google Scholar 

  3. H. Ren, D. Xu, G. Yan, G. Zhang, X. Wang, S. Long, and J. Yang, Compos. Sci. Technol., 146, 65 (2017).

    Article  CAS  Google Scholar 

  4. K. Zhang, G. Zhang, B. Liu, X. Wang, S. Long, and J. Yang, Compos. Sci. Technol., 98, 57 (2014).

    Article  CAS  Google Scholar 

  5. B. Liu, X. Wang, S. Long, and J. Yang, Compos. Interface, 21, 359 (2014).

    Article  CAS  Google Scholar 

  6. J. Yang, J. Xiao, J. Zeng, L. Bian, C. Peng, and F. Yang, Fiber. Polym., 14, 759 (2013).

    Article  CAS  Google Scholar 

  7. https://www.lotryl.eom/export/shared/.content/media/downloads/products-documentations/altuglas-international/pof/lotader/tds-lotader-ax8900.pdf, (Accessed September 17, 2018).

  8. B. Cetin, A. E. Sahin, N. G. Karsli, T. Yilmaz, T. Sinmazcelik, and I. Curgul, Acta Phys. Pol. A, 129, 683 (2016).

    Article  CAS  Google Scholar 

  9. D. Pedrazzoli, A. Pegoretti, and K. Kalaitzidou, Compos. Sci. Technol., 98, 15 (2014).

    Article  CAS  Google Scholar 

  10. Z. Zhao, K. Teng, N. Li, X. Li, Z. Xu, L. Chen, J. Niu, H. Fu, L. Zhao, and Y. Liu, Compos. Struct., 159, 761 (2017).

    Article  Google Scholar 

  11. K. Yu, M. Wang, J. Wu, K. Qian, J. Sun, and X. Lu, Nanomaterials, 6, 89 (2016).

    Article  PubMed Central  CAS  Google Scholar 

  12. D. Pedrazzoli, A. Pegoretti, and K. Kalaitzidou, J. Appl. Polym. Sci., 132, 41682 (2015).

    Google Scholar 

  13. N. G. Karsli, S. Yesil, and A. Aytac, Compos. Part B-Eng., 63, 154 (2014).

    Article  CAS  Google Scholar 

  14. E. Karatas, O. Gul, N. G. Karsli, and T. Yilmaz, Compos. Part B-Eng., 163, 730 (2019).

    Article  CAS  Google Scholar 

  15. P. Noorunnisa Khanam, M. A. AlMaadeed, M. Ouederni, E. Harkin-Jones, B. Mayoral, A. Hamilton, and D. Sun, Vacuum, 130, 63 (2016).

    Article  CAS  Google Scholar 

  16. S. Y. Yang, W. N. Lin, Y. L. Huang, H. W. Tien, J. Y. Wang, C. C. M. Ma, S. M. Li, and Y. S. Wang, Carbon, 49, 793 (2011).

    Article  CAS  Google Scholar 

  17. D. Lahiri, F. Hec, M. Thiesse, A. Durygin, C. Zhang, and A. Agarwal, Tribol. Int., 70, 165 (2014).

    Article  CAS  Google Scholar 

  18. T. Liu, Y. Wang, A. Eyler, and W. H. Zhong, Eur. Polym. J., 55, 210 (2014).

    Article  CAS  Google Scholar 

  19. T. Liu, B. Li, B. Lively, A. Eyler, and W. H. Zhong, Wear, 309, 43 (2014).

    Article  CAS  Google Scholar 

  20. H. Wang, G. Xie, Z. Zhu, Z. Ying, and Y. Zeng, Compos. Part A-Appl. S., 67, 268 (2014).

    Article  CAS  Google Scholar 

  21. N. T. Kamar, M. M. Hossain, A. Khomenko, M. Haq, L. T. Drzal, and A. Loos, Compos. Part A-Appl. S., 70, 82 (2015).

    Article  CAS  Google Scholar 

  22. C. M. Hadden, D. R. Klimek-McDonald, E. J. Pineda, J. A. King, A. M. Reichanadter, I. Miskioglu, S. Gowtham, and G. M. Odegard, Carbon, 95, 100 (2015).

    Article  CAS  Google Scholar 

  23. B. Ahmadi-Moghadam and F. Taheri, Eng. Fract. Mech., 143, 97 (2015).

    Article  Google Scholar 

  24. H. M. Chong, S. J. Hinder, and A. C. Taylor, J. Mater. Sci., 51, 8764 (2016).

    Article  CAS  Google Scholar 

  25. F. Wang, L. T. Drzal, Y. Qin, and Z. Huang, J. Mater. Sci., 50, 1082 (2015).

    Article  CAS  Google Scholar 

  26. J. Yu, H. K. Choi, H. S. Kim, and S. Y. Kim, Compos. Part A-Appl. S., 8, 79 (2016).

    Article  CAS  Google Scholar 

  27. Y. Gao, O. T. Picot, E. Bilotti, and T. Peijs, Eur. Polym. J., 86, 117 (2017).

    Article  CAS  Google Scholar 

  28. R. Scaffaro, L. Botta, A. Maio, and G. Gallo, Compos. Part B-Eng., 109, 138 (2017).

    Article  CAS  Google Scholar 

  29. M. Keramati, I. Ghasemi, M. Karrabi, H. Azizi, and M. Sabzi, Polym. Plast. Technol. Eng., 55, 1039 (2016).

    Article  CAS  Google Scholar 

  30. A. Finniss, S. Agarwal, and R. Gupta, J. Appl. Polym. Sci., 133, 44166 (2016).

    Article  CAS  Google Scholar 

  31. X. Yang, M. Xu, X. Zou, and X. Liu, Polym. Compos., 35, 404 (2014).

    Article  CAS  Google Scholar 

  32. M. O. Khan, S. N. Leung, E. Chan, H. E. Naguib, F. Dawson, and V. Adinkrah, Polym. Eng. Sci., 53, 2398 (2013).

    Article  CAS  Google Scholar 

  33. J. Xing, B. Deng, and Q. Liu, High Perform. Polym., 30, 519 (2018).

    Article  CAS  Google Scholar 

  34. M. Zhang, H. Wang, Z. Li, and B. Cheng, RSC Adv., 5, 13840 (2015).

    Article  CAS  Google Scholar 

  35. S. Deng, Z. Lin, B. Xu, W. Qiu, K. Liang, and W. Li, J. Therm. Anal. Calorim., 118, 197 (2014).

    Article  CAS  Google Scholar 

  36. J. Gu, C. Xie, H. Li, J. Dang, W. Geng, and Q. Zhang, Polym. Compos., 35, 1087 (2014).

    Article  CAS  Google Scholar 

  37. J. Gu, J. Du, J. Dang, W. Geng, S. Hu, and Q. Zhang, RSC Adv., 4, 22101 (2014).

    Article  CAS  Google Scholar 

  38. J. Wang, M. Wu, Y. Li, F. Luo, F. Chen, S. Chai, and Q. Fu, J. Mater. Sci., 48, 1932 (2013).

    Article  CAS  Google Scholar 

  39. N. G. Karsli, S. Demirkol, and T. Yilmaz, Compos. Part B-Eng., 88, 253 (2016).

    Article  CAS  Google Scholar 

  40. R. M. Santos, S. T. Mould, P. Formánek, M. C. Paiva, and J. A. Covas, Polymers, 10, 222 (2018).

    Article  PubMed Central  CAS  Google Scholar 

  41. N. Kumari and K. Kumar, J. Exp. Nanosci., 13, 14 (2018).

    Article  CAS  Google Scholar 

  42. P. C. Ma, N. A. Siddiqui, G. Marom, and J. K. Kim, Compos. Part A-Appl. S., 41, 1345 (2014).

    Article  CAS  Google Scholar 

  43. https://nanografi.com/graphene/graphene-nanoplatelet-99-9-3-nm-s-a-800-m2-g-dia-1-5/. (Accessed February 15, 2021).

  44. G. Ren, Z. Zhang, X. Zhu, B. Ge, F. Guo, X. Men, and W. Liu, Compos. Part A-Appl. S., 49, 157 (2013).

    Article  CAS  Google Scholar 

  45. C. Li, M. Xiang, and L. Ye, Compos. Part A-Appl. S., 95, 274 (2017).

    Article  CAS  Google Scholar 

Download references

Acknowledgement

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. The authors thank Mrs. Ecem Karatas Demiray for her experimental assistance.

Author information

Authors and Affiliations

  1. Faculty of Aviation and Space Sciences, Department of Airframe and Powerplant Maintenance, Kocaeli University, Kocaeli, 41380, Turkey

    Nevin Gamze Karsli

  2. Faculty of Engineering, Department of Mechanical Engineering, Kocaeli University, Kocaeli, 41380, Turkey

    Okan Gul & Taner Yilmaz

Authors
  1. Nevin Gamze Karsli
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Okan Gul
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Taner Yilmaz
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nevin Gamze Karsli.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Karsli, N.G., Gul, O. & Yilmaz, T. Investigation of the Synergistic Effect of Addition the Hybrid Carbon Fiber, Graphene Nanoplatelet and Matrix Modifier to Poly(phenylene sulphide) on Physical Properties. Fibers Polym 23, 1059–1067 (2022). https://doi.org/10.1007/s12221-022-4215-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12221-022-4215-z

Keywords

Search

Navigation