Abstract
Relationships among physical properties, low-stress mechanical properties and hand value of woollen fabric with and without fusible interlinings were examined. Subjective evaluation and objective measurements were analysed statistically. The results reveal that thickness, weight and adhesive density properties of woollen fabric with fusible interlinings impact hand value. Further exploration of adhesive point density, thickness and weight show effect on the lowstress mechanical properties from high to low in order. This study provides new theoretical insights on hand value and lowstress mechanical properties of woollen fabric with interlinings which is predicted by physical properties. It provided a convenient method for choosing request interlining for woollen fabric using for men’s suits.
Similar content being viewed by others
References
M. C. Chuang and S. H. Hung, J. Text. Inst., 102, 461 (2011).
M. Shiloh, J. Text. Inst., 63, 533 (1972).
J. N. Sneddon, J. A. Lee, and G. N. Soutar, J. Text. Inst., 103, 405 (2012).
V. Suelar and A. Okur, J. Sensory Stud., 22, 1 (2007).
R. Nayak and R. Padhye, “Garment Manufacturing Technology”, pp.247–273, Woodhead Publishing, Sawston, Cambridge, 2015.
Y. Wang, D. Chen, H. Chen, and W. Wang, Mater. Res. Inno., 19, 85 (2015).
S. S. Lai, Int. J. Cloth. Sci. Technol., 13, 322 (2001).
S. Jevšnik, F. Kalaoglu, C. Saricam, S. H. Eryuruk, S. K. Bahadir, D. Fakin, and S. Zoran, Fiber. Polym., 15, 2671 (2014).
S. Ishtiaque, A. Das, and A. Kundu, J. Text. Inst., 105, 348 (2014).
H. Wang, T. J. Mahar, and R. Hall, J. Text. Inst., 103, 691 (2012).
J. Fan and Y. Ng, Text. Res. J., 71, 661 (2001).
K. Kim, S. Inui, and M. Takatera, Text. Res. J., 81, 598 (2011).
B. Šaravanja, K. Malaric, T. Pušic, and D. Ujevic, Autex Res. J., 15, 93 (2015).
K. Kim, S. Sonehara, and M. Takatera, Int. J. Affect. Eng., 12, 177 (2013).
K. Kim, S. Inui, and M. Takatera, Text. Res. J., 82, 385 (2012).
A. Wong, Y. Li, P. Yeung, and P. Lee, Text. Res. J., 73, 31 (2003).
A. Wong, Y. Li, and P. Yeung, Text. Res. J., 74, 13 (2004).
A. Mitra, A. Majumdar, P. K. Majumdar and D. Bannerjee, Experimental Thermal and Fluid Science, 50, 172 (2013).
B. Behera and S. Muttagi, J. Text. Inst., 95, 283 (2004).
Y. Zhang, X. Wang, N. Pan, and R. Postle, J. Mater. Sci., 37, 1401 (2002).
V. Daukantiene and M. Gutauskas, Medžiagotyra, 9, 262 (2002).
C. Hui, T. Lau, S. Ng, and K. Chan, Text. Res. J., 74, 375 (2004).
C. W. Kan and M. L. Wong, AATCC Rev., 15, 38 (2015).
H. A. Kim and H. S. Ryu, Fiber. Polym., 9, 574 (2008).
S. Kawabata, “The Standardization and Analysis of Hand Evaluation”, 2nd ed., Textile Machinery Society of Japan, 1980.
Y. Chen, T. Zhao, and B. Turner, Text. Res. J., 71, 767 (2001).
A. Alamdar-Yazdi and J. Amirbayat, Int. J. Cloth. Sci. Technol., 12, 311 (2000).
D. S. Ji and J. J. Lee, Fiber. Polym., 17, 143 (2016).
D. Grineviciute and M. Gutauskas, Medžiagotyra, 10, 97 (2004).
S. E. G. Jeguirim, A. B. Dhouib, M. Sahnoun, M. Cheikhrouhou, N. Njeugna, L. Schacher, and D. Adolphe, J. Sensory Stud., 25, 201 (2010).
R. L. Barker and M. M. Scheininger, Text. Res. J., 52, 615 (1982).
N. Pan, Int. J. Des. Nat. Ecodyn., 1, 48 (2006).
V. Alley, J. Eng. Ind., 102, 25 (1980).
F. Cook, Text. World, 147, 80 (1997).
H. Y. Choi and J. S. Lee, Fiber. Polym., 7, 442 (2006).
J. R. A. Santos, J. Extension, 37, 1 (1999).
K. C. Chung, M. S. Pillsbury, M. R. Walters, and R. A. Hayward, J. Hand Surg., 23, 575 (1998).
D. S. Tawil, D. Rye, and M. Velonaki, Int. J. Robot. Res., 31, 1627 (2012).
K. Y. Yim and C. W. Kan, Text. Res. J., doi:10.1177/0040517516681963 (2016).
S. Ali and S. Begum, Ergonomics, 37, 801 (1994).
R. Deshmukh and A. Shetty, J. Appl. Polym. Sci., 107, 3707 (2008).
D. Sun and G. Stylios, Text. Res. J., 75, 639 (2005).
Y. L. Lam, C. W. Kan, C. W. M. Yuen, and C. H. Au, Text. Res. J., 81, 1008 (2011).
C. W. Kan and Y. L. Lam, Materials, 6, 314 (2013).
R. Yang, C. W. Kan, W. Y. Wong, and M. C. Law, Fiber. Polym., 14, 669 (2013).
O. Avinc, A. Khoddami, and H. Hasani, Fiber. Polym., 12, 405 (2011).
J. Geršak, Int. J. Cloth. Sci. Technol., 16, 238 (2004).
S. Fontaine, C. Marsiquet, M. Renner, M. A. Bueno, and N. Nicolletti, Text. Res. J., 75, 826 (2005).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Q., Kan, Cw. & Chan, Ck. Relationship Between Physical and Low-stress Mechanical Properties to Fabric Hand of Woollen Fabric with Fusible Interlinings. Fibers Polym 19, 230–237 (2018). https://doi.org/10.1007/s12221-018-7464-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-018-7464-5