Skip to main content
Log in

Properties of stick-slip stage of yarn pull-out in para-aramid woven fabric

Fibers and Polymers Aims and scope Submit manuscript


The aim of this study was to understand stick-slip properties of para-aramid woven fabrics. For this reason, pullout test was conducted on para-aramid Kevlar®29 and Kevlar®129 woven fabrics. The stick-slip and accumulative retraction force regions were defined based on the force-displacement curve. It was found that the stick-slip force and accumulative retraction force depended on fabric density and the number of pulled ends in the fabric. Stick-slip force in the multiple yarn pull-out test was higher than those of the single yarn pull-out test. Stick-slip force in single and multiple yarn pull-out tests in the dense K29 fabric were higher than those of the loose K129 fabric. In addition, long fabric samples showed high stick-slip force compared to that of the short fabric samples. On the other hand, the amount of stick-slip force was related to the number of interlacement points in the fabric whereas the amount of accumulative retraction force was related to fabric structural response.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions


  1. Z. Dong and C. T. Sun, Compos. Part A-Appl. S., 40, 1863 (2009).

    Article  Google Scholar 

  2. K. M. Kirkwood, J. E. Kirkwood, Y. S. Lee, G. Ronald, and J. R. Egres, Text. Res. J., 74, 920 (2004).

    Article  CAS  Google Scholar 

  3. J. E. Kirkwood, K. M. Kirkwood, Y. S. Lee, G. Ronald, J. R. Egres, and J. N. Wagner, Text. Res. J., 74, 939 (2004).

    Article  CAS  Google Scholar 

  4. D. C. Erlich, D. A. Shockey, and J. W. Simons, Text. Res. J., 73, 179 (2003).

    Article  CAS  Google Scholar 

  5. M. P. Rao, Y. Duan, M. Keefe, B. M. Powers, and T. A. Bogetti, Compos. Struct., 89, 556 (2009).

    Article  Google Scholar 

  6. B. A. Cheeseman and T. A. Bogetti, Compos. Struct., 61, 161 (2003).

    Article  Google Scholar 

  7. P. M. Cunniff, Text. Res. J., 66, 45 (1996).

    Article  CAS  Google Scholar 

  8. V. B. C. Tan, V. P. W. Shim, and S. X. Zeng, Int. J. Impact Eng., 32, 561 (2005).

    Article  Google Scholar 

  9. S. X. Zeng, V. B. C. Tan, and V. P. W. Shim, Int. J. Numer. Meth. Eng., 66, 1309 (2005).

    Article  Google Scholar 

  10. S. Rebouillat, J. Mater. Sci., 33, 3293 (1998).

    Article  CAS  Google Scholar 

  11. S. A. R. D. Sebastian, A. I. Bailey, B. J. Briscoe, and D. Tabor, Text. Res. J., 56, 604 (1986).

    Article  CAS  Google Scholar 

  12. K. Bilisik, Fiber. Polym., 12, 1106 (2011).

    Article  CAS  Google Scholar 

  13. B. J. Briscoe and F. Motamedi, Wear, 158, 229 (1992).

    Article  Google Scholar 

  14. Y. Duan, M. Kefe, T. A. Bogetti, and B. A. Cheeseman, Compos. Struct., 68, 331 (2005).

    Article  Google Scholar 

  15. Y. Duan, M. Kefe, T. A. Bogetti, B. A. Cheeseman, and B. Powers, Int. J. Impact Eng., 32, 1299 (2006).

    Article  Google Scholar 

  16. Y. Termonia, Text. Res. J., 74, 723 (2004).

    Article  CAS  Google Scholar 

  17. K. Bilisik and M. Korkmaz, Text. Res. J., 80, 1697 (2010).

    Article  CAS  Google Scholar 

  18. K. Bilisik and M. Korkmaz, Text. Res. J., 81, 847 (2011).

    Article  CAS  Google Scholar 

  19. K. Bilisik, Text. Res. J., in press, DOI:10.1177/0040517511431318.

  20. K. Bilisik, J. Ind. Text., 41, 201 (2012).

    Article  Google Scholar 

  21. O. V. Sergienko, D. R. Macayeal, and R. A. Bindschadler, Annals of Glaciology, 50, 87 (2009).

    Article  Google Scholar 

  22. B. S. Gupta, “Friction in Textile Materials”, Textile Series no. 78, pp.95–105, Woodhead Publishing Limited and CRC Press LLC., Cambridge, 2010.

    Google Scholar 

  23. J. W. S. Hearle, “High Performance Fibers”, pp.69–70, Cambridge, Woodhead Publishing Limited and CRC Press LLC, UK, 2001.

    Book  Google Scholar 

  24. MathWorks 2008, MATLAB R2008a, ver. 7, Computer Program, The MathWorks Inc., Natick, MA, USA.

Download references

Author information

Authors and Affiliations


Corresponding author

Correspondence to Kadir Bilisik.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bilisik, K., Yildirim, B. Properties of stick-slip stage of yarn pull-out in para-aramid woven fabric. Fibers Polym 14, 630–638 (2013).

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: