Abstract
The silane coupling agent of γ-aminopropyl triethoxy silane combined with ultrasonic vibration was employed to modify the surface of high modulus poly (p-phenylene-2, 6-benzobisoxazole) (HMPBO) fibers. The results showed that polar hydroxyl groups were successfully introduced on the HMPBO surface. The contact angles on HMPBO fibers both for water (θ water ) and for glycol (θ glycol ) gradually were decreased, and the surface roughness of HMPBO fibers was also increased. Meanwhile, the single fiber pull-out strength of HMPBO was increased accordingly.
Similar content being viewed by others
References
P. Davies, A. R. Bunsell, and E. Chailleu, J. Mat. Sci., 45, 6395 (2010).
J. Troitzsch, “Plastics Flammability Handbook: Principles, Regulations, Testing, and Approval”, 3rd ed., p.103, Hanser Gardner Publications, Inc., New York, 2004.
T. Zhang, J. H. Jin, S. L. Yang, G. Li, and J. M. Jiang, Carbohyd. Polym., 78, 364 (2009).
T. Zhang, D. Y. Hu, J. H. Jin, S. L. Yang, G. Li, and J. M. Jiang, Eur. Polym. J., 45, 302 (2009).
H. Ishikawa, Q. Y. Chen, Y. Z. Bin, K. Komatsu, and M. Matsuo, J. Mat. Sci., 42, 7772 (2007).
E. Mäder, S. Melcher, J. W. Liu, S. L. Gao, A. D. Bianchi, S. Zherlitsyn, and J. Wosnitza, J. Mat. Sci., 42, 8047 (2007).
J. H. Li, X. Q. Chen, X. Li, H. L. Cao, H. Y. Yu, and Y. D. Huang, Polym. Int., 55, 456 (2006).
D. D. Feng, S. F. Wang, Q. X. Zhuang, P. P. Wu, and Z. W. Han, Polymer, 45, 8871 (2004).
R. J. Davies, M. A. Montes-Morán, C. Riekel, and R. J. Young, J. Mat. Sci., 38, 2105 (2003).
D. Liu, P. Chen, J. J. Mu, Q. Yu, and C. Lu, Appl. Surf. Sci., 257, 6935 (2011).
G. M. Wu and Y. T. Shyng, J. Polym. Res., 12, 93 (2005).
G. M. Wu and Y. T. Shyng, Composites: Part A, 35, 1291 (2004).
K. Tamargo-Martínez, A. Martínez-Alonso, M. A. Montes-Morán, and J. M. D. Tascon, Compos. Sci. Technol., 71, 784 (2011).
G. M. Wu, Y. T. Shyng, S. F. Kung, and C. F. Wu, Vacuum, 83, S271 (2009).
G. M. Wu and C. H. Chang, Vacuum, 81, 1159 (2007).
G. M. Wu, Mater. Chem. Phys., 85, 81 (2004).
F. Guo, Z. Z. Zhang, H. J. Zhang, and W. M. Liu, Composites: Part A, 40, 1305 (2009).
J. L. Wang, G. Z. Liang, W. Zhao, and Z. P. Zhang, Surf. Coat. Technol., 201, 4800 (2007).
C. H. Zhang, Y. D. Huang, and Y. D. Zhao, Mater. Chem. Phys., 92, 245 (2005).
X. L. Pan, R. Y. Zhang, S. J. Peng, and Y. P. Qiu, Fiber. Polym., 11, 372 (2010).
D. D. Liu, J. Hu, Y. M. Zhao, X. S. Zhou, P. Ning, and Y. Wang, J. Appl. Polym. Sci., 102, 1428 (2006).
Y. Y. Luan, X. F. Liu, and J. X. Xie, Polym. Mater. Sci. Eng., 25, 86 (2009).
W. Tian, K. L. Yung, Y. Xu, L. Huang, J. Kong, and Y. Xie, Nanoscale, 3, 4094 (2011).
W. Tian, Y. Xu, L. B. Huang, K. L. Yung, Y. C. Xie, and W. Chen, Nanoscale, 3, 5147 (2011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tang, Y., Gu, J. & Bai, T. Enhanced surface property of HMPBO fibers by using γ-aminopropyl triethoxy silane. Fibers Polym 13, 1249–1253 (2012). https://doi.org/10.1007/s12221-012-1249-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-012-1249-7