Abstract
A new production method for figured fabric has been developed. The figured fabric generated in this study is a plain weave piled fabric and it shows the same figure on both sides unlike those fabrics woven on dobby or jacquard looms. It is woven by a specialty yarn called the chenille yarn which is obtained by separating each warp of a base fabric woven in leno structure. The base fabric is woven by inserting different colored weft each time in a certain sequence arranged according to the target figure image. A CAD software and a computerized controller have been developed to control all the motions of a conventional rapier loom and to handle the numerous weft insertion schedule efficiently.
Similar content being viewed by others
References
W Aldrich “CAD in Clothing and Textiles” Oxford BSP Professional Books, London 1992.
M. Yates, “Fabrics: A Guide for Interior Designers and Architectsrd, W. W. Norton and Company, New York, 2002.
M. Humphries, “Fabric Reference”, Prentice-Hall, New Jersey, 2003.
K. Lee, “Principles of CAD/CAM/CAE”, Addison Wesley, Massachusetts, 1999.
A. Orrmerod and W. Sondhelm, “Weaving Technolog and Operations”, Hyperion Books, New York, 1995
S. Meller and J. Elffers, “Textile Designs”, Harry and Abrams, New York, 1991.
S. Alderman, “Masterin Weave Structures”, Interweave Press, Connecticut, 2004.
Y. Koren, “Computer Control of Manufacuring Systems”, Mcgraw-Hill, New York, 1983.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, S., Lee, J.S. New production method for a plain weave figured fabric. Fibers Polym 12, 137–141 (2011). https://doi.org/10.1007/s12221-011-0137-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-011-0137-x