Abstract
In 2010, the first offshore wind turbine with integrated installation was established in Qidong sea area of Jiangsu Province, China, which led to the implementation phase of one-step-installation technique based on the design and construction of large-scale bucket-top-bearing (LSBTB) bucket foundation. The critical technique of LSBTB bucket foundation included self-floating towing, penetration with adjustment of horizontal levelness, removability and one-step-installation. The process of one-step-installation included the prefabrication of LSBTB bucket foundation in onshore construction base, installation and debugging of wind power, overall water transportation of foundation and wind power system, and installation of foundation and offshore wind turbine on the appointed sea area. The cost of one-step-installation technique was about 5 000 Yuan/kW, which was 30%-50% lower than that of the existing technique. The prefabrication of LSBTB bucket foundation took about two months. During the one-step-installation process, the installation and debugging of wind power and overall water transportation need about one to two days in sea area within 35 m depth. After the proposed technique is industrialized, the cost will be further reduced, and the installation capacity is expected to be up to 500 wind turbines per year.
Similar content being viewed by others
References
Lian Jijian, Ding Hongyan, Liu Run et al. Research Report on Key Technology of the CBF-3-150 Composite Bucket Foundation for Offshore Wind Turbines[R]. Tianjin University, Tianjin, China, 2010.
Lian Jijian, Sun Liqiang, Zhang Jinfeng et al. Bearing capacity and technical advantages of composite bucket foundation of offshore wind turbines [J]. Transactions of Tian jin University, 2011, 17(2): 132–137.
Christian LeBlanc Bakmar. The Monopod Bucket Foundation-Recent Experience and Challenges Ahead[EB/OL]. http://www. gl-group.com/pdf/No12_Bakmar.pdf, 2009.
Ding Hongyan, Li Zengzhi, Lian Jijian et al. Soil reinforcement experiment inside large-scale bucket foundation in muddy soil [J]. Transactions of Tianjin University, 2012, 18(3): 168–172.
Zhang Puyang, Ding Hongyan, Le Conghuan. Test on the dynamic response of the offshore wind turbine structure with the large-scale bucket foundation [J]. Procedia Environmental Sciences, 2012, 12(Part B):856–863.
Lian Jijian, Ding Hongyan, Zhang Puyang et al. Design of large-scale prestressing bucket foundation for offshore wind turbines [J]. Transactions of Tianjin University, 2012, 18(2): 79–84.
Ding Hongyan, Zhang Puyang, Le Conghuan et al. Construction and installation technique of large-scale topbearing bucket foundation for offshore wind turbine[C]. In:MACE Proceedings. Hohhot, China, 2011.
Ultramarine Inc. Reference Manual for Moses [M]. Houston, Texas, USA, 2009.
Guidelines for Towage at Sea[S]. China Classification Society, 2011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by National High Technology Research and Development Program of China (“863” Program, No. 2012AA051705), National Natural Science Foundation of China (No. 51109160) and International Science and Technology Cooperation Program of China (No. 2012DFA70490).
Ding Hongyan, born in 1963, male, Dr, Prof.
Rights and permissions
About this article
Cite this article
Ding, H., Lian, J., Li, A. et al. One-step-installation of offshore wind turbine on large-scale bucket-top-bearing bucket foundation. Trans. Tianjin Univ. 19, 188–194 (2013). https://doi.org/10.1007/s12209-013-2099-0
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12209-013-2099-0