Skip to main content
SpringerLink
Log in

Transverse vibration of the boring bar for BTA deep hole machining under stochastic excitation

  • Original Article
  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

Taking the BTA deep hole boring bar as the object of axial flow and axial feed movement, the dynamic characteristics of the fluid-structure coupling boring bar are systematically studied. The influence of complex deformation (bending, torsion, tension, and compression) factors are considered in the derivation of dynamic characteristics. According to the force situation of the BTA deep hole boring bar, the transverse vibration equation of the BTA deep hole boring bar is established. The transverse vibration equation is discretized by Galerkin method, and then its characteristic root, response variance, and spectral density are solved to realize the transverse vibration analysis of the boring bar. Research has found that the correlation between system stability and boring bar speed is no longer monotonous. System stability is positively correlated with the equivalent stiffness and the equivalent shear modulus. There is a negative correlation between system stability and axial force, but it is not significant.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. A. Luongo, M. J. Leamy, S. Lenci, G. Piccardo and C. Touzé, Advances in stability, bifurcations and nonlinear vibrations in mechanical systems, Nonlinear Dynamics, 103 (2021) 2993–2995.

    Article  Google Scholar 

  2. C. H. Miwadinou, A. V. Monwanou, L. A. Hinvi, V. Kamdoum-Tamba, A. A. Koukpémèdji and J. B. ChabiOrou, Nonlinear oscillations of nonlinear damping gyros: resonances, hysteresis and multistability, International Journal of Bifurcation and Chaos, 30 (14) (2020) 2050203.

    Article  MathSciNet  MATH  Google Scholar 

  3. Y. V. Mikhlin and N. V. Perepelkin, Non-linear normal modes and their applications in mechanical systems, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (10) (2011) 2369–2384.

    Google Scholar 

  4. D. Biermann, F. Bleicher, U. Heisel, F. Klocke, H. C. Möhring and A. Shih, Deep hole drilling, CIRP Annals, 67 (2) (2018) 673–694.

    Article  Google Scholar 

  5. J. B. Chandar, L. Nagarajan and M. S. Kumar, Recent research progress in deep hole drilling process: a review, Surface Review and Letters, 28 (11) (2021) 2130003.

    Article  Google Scholar 

  6. H. M. Al-Wedyan, R. B. Bhat and K. Demirli, Whirling vibration in boring trepanning association deep hole boring process: analytical and experimental investigations, Journal of Manufacturing Science and Engineering, 129 (1) (2007) 48–62.

    Article  MATH  Google Scholar 

  7. H. Al-Wedyan, Control of whirling vibrations in BTA deep hole boring process using fuzzy logic modeling and active suppression technique, Doctoral Thesis, Concordia University, Canada (2004).

    Google Scholar 

  8. W. Zhao, B. Huo and D. Huang, Nonlinear transverse vibration induced by fluid disturbance on BTA deep hole precision reaming system, Journal of Mechanical Engineering, 56 (17) (2020) 155–164.

    Article  Google Scholar 

  9. H. M. Al-Wedyan and M. T. Hayajneh, Dynamic modelling and analysis of whirling motion in BTA deep hole boring process, International Journal of Machining and Machinability of Materials, 10 (1–2) (2011) 48–70.

    Article  Google Scholar 

  10. G. Ma and X. Shen, Eigensolution of a BTA deep-hole drilling shaft system, Journal of Mechanical Science and Technology, 32 (2018) 1499–1504.

    Article  Google Scholar 

  11. K. Weinert, O. Webber and C. Peters, On the influence of drilling depth dependent modal damping on chatter vibration in BTA deep hole drilling, CIRP Annals, 54 (1) (2005) 363–366.

    Article  Google Scholar 

  12. M. S. Khan and M. I. Khan, A novel numerical algorithm based on Galerkin-Petrov time-discretization method for solving chaotic nonlinear dynamical systems, Nonlinear Dynamics, 91 (2018) 1555–1569.

    Article  Google Scholar 

  13. H. Arvin, A. Arena and W. Lacarbonara, Nonlinear vibration analysis of rotating beams undergoing parametric instability: Lagging-axial motion, Mechanical Systems and Signal Processing, 144 (2020) 106892.

    Article  Google Scholar 

  14. J. Metsebo, N. Upadhyay, P. K. Kankar and B. R. Nana Nbendjo, Modelling of a rotor-ball bearings system using timoshenko beam and effects of rotating shaft on their dynamics, Journal of Mechanical Science and Technology, 30 (2016) 5339–5350.

    Article  Google Scholar 

  15. L. Yang, Z. Mao, S. Wu, X. Chen and R. Q. Yan, Nonlinear dynamic behavior of rotating blade with breathing crack, Frontiers of Mechanical Engineering, 16 (2021) 196–220.

    Article  Google Scholar 

  16. J. H. Chin, C. T. Hsieh and L. W. Lee, The shaft behavior of BTA deep hole drilling tool, International Journal of Mechanical Sciences, 38 (5) (1996) 461–482.

    Article  MATH  Google Scholar 

  17. Y. L. Perng and J. H. Chin, Theoretical and experimental investigationon the spinning BTA deep-hole drill shafts containing fluids and subject to axial forces, International Journal of Mechanical Sciences, 41 (11) (1999) 1301–1322.

    Article  MATH  Google Scholar 

  18. C. Deng and J. H. Chin, Roundness errors in BTA drilling and a model of waviness and lobing caused by resonant forced vibrations of its long drill shaft, American Society of Mechanical Engineers, 126 (3) (2004) 524–534.

    Google Scholar 

  19. K. Matsuzaki, T. Ryu, A. Sueoka and K. Tsukamoto, Theoretical and experimental study on rifling mark generating phenomena in BTA deep hole drilling process (generating mechanism and countermeasure), International Journal of Machine Tools and Manufacture, 88 (2015) 194–205.

    Article  Google Scholar 

  20. I. M. Mehrabadi, M. Nouri and R. Madoliat, Investigating chatter vibration in deep drilling, including process damping and the gyroscopic effect, International Journal of Machine Tools and Manufacture, 49 (12–13) (2009) 939–946.

    Article  Google Scholar 

  21. K. Weinert, C. Weihs, O. Webber and N. Raabe, Varying bending eigenfrequencies in BTA deep hole drilling: mechanical modeling using statistical parameter estimation, Production Engineering, 1 (2007) 127–134.

    Article  Google Scholar 

  22. D. Biermann, A. Sacharow and K. Wohlgemuth, Simulation of the BTA deep-hole drilling process, Production Engineering, 3 (2009) 339–346.

    Article  Google Scholar 

  23. N. Raabe, D. Enk, D. Biermann and C. Weihs, Dynamic disturbances in bta deep-hole drilling: modelling chatter and spiralling as regenerative effects, A. Fink, B. Lausen, W. Seidel and A. Ultsch (eds), Advances in Data Analysis, Data Handling and Business Intelligence, Studies in Classification, Data Analysis, and Knowledge Organization, Springer, Berlin, Heidelberg (2009) 745–754.

    Chapter  Google Scholar 

  24. N. Raabe, O. Webber, W. Theis and C. Weihs, Spiralling in BTA deep-hole drilling: models of varying frequencies, M. Spiliopoulou, R. Kruse, C. Borgelt, A. Nürnberger and W. Gaul (eds), From Data and Information Analysis to Knowledge Engineering, Studies in Classification, Data Analysis, and Knowledge Organization, Springer, Berlin, Heidelberg (2006) 510–517.

    Chapter  Google Scholar 

  25. A. Messaoud and C. Weihs, Monitoring a deep hole drilling process by nonlinear time series modeling, Journal of Sound and Vibration, 321 (3–5) (2009) 620–630.

    Article  Google Scholar 

  26. A. Steininger and F. Bleicher, In-process monitoring and analysis of dynamic disturbances in boring and trepanning association (BTA) deep drilling, Journal of Mechanical Engineering, 18 (4) (2018) 47–59.

    Google Scholar 

  27. Z. Hu, W. Zhao and L. Miao, Research on vortex motion of BTA drilling shaft caused by hydro-force, Journal of Mechanical Engineering, 41 (2005) 230–233.

    Article  Google Scholar 

  28. W. Zhao, B. Huo, D. Huang and J. Zhao, Effect of the perturbation in cutting fluid on the transverse vibration frequency in BTA deep-hole boring bar system, Journal of Vibration and Shock, 39 (2020) 184–192.

    Google Scholar 

  29. J. Dai, W. Gao, N. Zhang and N. G. Liu, Seismic random vibration analysis of shear beams with random structural parameters, Journal of Mechanical Science and Technology, 24 (2010) 497–504.

    Article  Google Scholar 

  30. S. A. A. Hosseini and S. E. Khadem, Vibration and reliability of a rotating beam with random properties under random excitation, International Journal of Mechanical Sciences, 49 (12) (2007) 1377–1388.

    Article  Google Scholar 

  31. M. F. Dimentberg, Random vibrations of a rotating shaft with non-linear damping, International Journal of Non-Linear Mechanics, 40 (5) (2005) 711–713.

    Article  MathSciNet  MATH  Google Scholar 

  32. S. Y. Lee and G. Q. Cai, Quasi-linearization of non-linear systems under random vibration by probabilistic method, Journal of Mechanical Science and Technology, 23 (2009) 2022–2029.

    Article  Google Scholar 

  33. C. Fu, J. J. Sinou, W. Zhu, K. Lu and Y. Yang, A state-of-the-art review on uncertainty analysis of rotor systems, Mechanical Systems and Signal Processing, 183 (2023) 109619.

    Article  Google Scholar 

  34. Z. Wang and J. Song, Equivalent linearization method using Gaussian mixture (GM-ELM) for nonlinear random vibration analysis, Structural Safety, 64 (2017) 9–19.

    Article  Google Scholar 

  35. F. Liu and Y. Zhao, A hybrid method for analysing stationary random vibration of structures with uncertain parameters, Mechanical Systems and Signal Processing, 164 (2022) 108259.

    Article  Google Scholar 

  36. J. Qian and L. Chen, Optimization for vibro-impact nonlinear energy sink under random excitation, Theoretical and Applied Mechanics Letters, 12 (5) (2022) 100364.

    Article  Google Scholar 

  37. S. Rao, Vibration of Continuous Systems, John Wiley & Sons (2006).

  38. S. Irani and S. Sazesh, A new flutter speed analysis method using stochastic approach, Journal of Fluids and Structures, 40 (7) (2013) 105–114.

    Article  Google Scholar 

  39. E. Kreyszig, Advanced Egineering Mathematics, 10th Ed., John Wiley & Sons (2011).

Download references

Acknowledgments

This work is supported by Research Program supported by the National Natural Science Foundation of China, grant number (51075126); Scientic and Technological Research Project of Henan Provincial Science and Technology Department, grant number (192102210052).

Author information

Authors and Affiliations

  1. School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454000, China

    Quanbin Zhang, Wu Zhao & Shuangxi Jing

  2. College of Mechanical and Electrical Engineering, Xinxiang University, Xinxiang, 453003, China

    Yamin Li

Authors
  1. Quanbin Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Wu Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Yamin Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Shuangxi Jing
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Wu Zhao.

Additional information

Quanbin Zhang is a doctoral candidate of the School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China. His research interests include reliability algorithm, fault diagnosis and nonlinear vibration.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Q., Zhao, W., Li, Y. et al. Transverse vibration of the boring bar for BTA deep hole machining under stochastic excitation. J Mech Sci Technol 37, 5635–5648 (2023). https://doi.org/10.1007/s12206-023-1006-4

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-023-1006-4

Keywords

Search

Navigation