Skip to main content
SpringerLink
Log in

Effect of guide vane profile on the hydraulic performance of moderate low-specific-speed Francis turbine

  • Original Article
  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

The matching between the guide vane (GV) and runner is essential for the stable and efficient operation of hydraulic turbines. To investigate the compatibility between GV and runner, we have conducted the numerical calculations of a moderate low-specific-speed Francis turbine at 25 operating points within the operating range of 130–190 m head and 3–19° GV outflow angle. The energy characteristics, flow field characteristics, and static pressure variation of turbines with different GV profile types have been comparatively analyzed. The results show that moderate low-specific-speed Francis turbines with symmetrical and negative curvature GV demonstrate higher efficiency under medium to high head, 55–100 % rated output operating conditions. Under small opening and medium head conditions, the static pressure in the blade leading edge is smaller, and the low-pressure area is larger for the Francis turbine with positive curvature GV. When the GV opening increases, the relationship between the comparative values of static-pressure and low-pressure areas reverses. The turbine with positive curvature GV is more favorable for increasing static-pressure and narrow low-pressure areas, which can reduce the cavitation damage. Our study provides guidelines to optimize the design of GVs and runner for hydraulic turbines.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Abbreviations

Q :

Flow rate (m3/s)

H :

Water head (m)

n :

Rotational speed (rpm)

n 11 :

Unit speed

Q 11 :

Unit discharge

Pos :

Positive curvature GV

Sym :

Symmetrical curvature GV

Neg :

Negative curvature GV

GV :

Guide vane

AGV :

Adjustable guide vane

CFD :

Computational fluid dynamics

SST :

Shear-stress transport

References

  1. P. Martineau Rousseau, A. Soulaïmani and M. Sabourin, Efficiency assessment for rehabilitated francis turbines using urans simulations, Water, 13 (14) (2021).

  2. F. Ayancik, E. Acar, K. Celebioglu and S. Aradag, Simulation-based design and optimization of Francis turbine runners by using multiple types of metamodels, Proc. of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 231 (8) (2017) 1427–1444.

    Article  Google Scholar 

  3. K. Celebioglu and F. Z. Aytac Yilmaz, Numerical investigation of the effects of design parameters on hydraulic turbine guide vane design, Pamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi, 26 (4) (2020) 666–673.

    Article  Google Scholar 

  4. X. Yexiang, W. Zhengwei, Y. Zongguo and Z. Jin, Experimental and numerical analysis of pressure pulses characteristics in a Francis turbine with partial load, IOP Conf. Ser.: Earth Environ. Sci., 12 (2010)

  5. G. Li, E. Chen, A. Yang, Z. Xie and G. Zhao, Effect of guide vanes on flow and vibroacoustic in an axial-flow pump, Mathematical Problems in Engineering, 2018 (2018) 1–11.

    Google Scholar 

  6. B. J. Lewis and J. M. Cimbala, Unsteady computational fluid dynamic analysis of the behavior of guide vane trailing-edge injection and its effects on downstream rotor performance in a Francis hydroturbine, Journal of Turbomachinery-Transactions of the ASME, 137 (8) (2015) 081001.

    Article  Google Scholar 

  7. U. Shrestha and Y.-D. Choi, Suppression of flow instabilities in the stay vane passage of the Francis hydro turbine model by design optimization, Journal of Mechanical Science and Technology, 35 (1) (2021) 159–170.

    Article  Google Scholar 

  8. X. Cheng, B. Lv, C. Ji, N. Jia and Dorah N, Influence of circumferential placement position of guide vanes on performance and dynamic characteristics of nuclear reactor coolant pump, Mathematical Problems in Engineering, 2020 (2020) 1–12.

    Google Scholar 

  9. D. Li, H. Wang, Z. Li, T. K. Nielsen, R. Goyal, X. Wei and D. Qin, Transient characteristics during the closure of guide vanes in a pump-turbine in pump mode, Renewable Energy, 118 (2018) 973–983.

    Article  Google Scholar 

  10. R. Tao, X. Zhou, B. Xu and Z. Wang, Numerical investigation of the flow regime and cavitation in the vanes of reversible pump-turbine during pump mode’s starting up, Renewable Energy, 141 (2019) 9–19.

    Article  Google Scholar 

  11. T. Zheming, L. Hao, J. Ma, T. Shuiguang, Y. Zhou, Q. Chen and Y. Li, Investigating the performance of a super high-head francis turbine under variable discharge conditions using numerical and experimental approach, Energies, 13 (15) (2020) 3868.

    Article  Google Scholar 

  12. X. Yexiang, W. Zhengwei and Y. Zongguo, Experimental and numerical analysis of blade channel vortices in a Francis turbine runner, Engineering Computations, 28 (2) (2011) 154–171.

    Article  Google Scholar 

  13. R. Goyal and B. K. Gandhi, Review of hydrodynamics instabilities in Francis turbine during off-design and transient operations, Renewable Energy, 116 (2018) 697–709.

    Article  Google Scholar 

  14. D. Li, H. Wang, Y. Qin, Z. Li, X. Wei and D. Qin, Mechanism of high amplitude low frequency fluctuations in a pump-turbine in pump mode, Renewable Energy, 126 (2018) 668–680.

    Article  Google Scholar 

  15. M. Binama, W. T. Su, W. H. Cai, F. C. Li, X. Z. Wei, A. Muhirwa, R. Z. Gong and D. W. Wekesa, Investigation on reversible pump turbine flow structures and associated pressure field characteristics under different guide vane openings, Science China Technological Sciences, 62 (11) (2019) 2052–2074.

    Article  Google Scholar 

  16. D. Y. Li, R. Z. Gong, H. J. Wang, J. Zhang, X. Z. Wei and L. F. Shu, Numerical investigation in the vaned distributor under different guide vanes openings of a pump turbine in pump mode, Journal of Applied Fluid Mechanics, 9 (1) (2016) 253–266.

    Article  Google Scholar 

  17. J. T. Liu, Y. Wu and Y. Li, Numerical predictions of pressure fluctuations in a model pump turbine with small guide vane opening based on partial averaged navier stokes approach, Journal of Applied Fluid Mechanics, 9 (6) (2016) 2661–2669.

    Article  Google Scholar 

  18. Z. Qian, F. Wang, Z. Guo and J. Lu, Performance evaluation of an axial-flow pump with adjustable guide vanes in turbine mode, Renewable Energy, 99 (2016) 1146–1152.

    Article  Google Scholar 

  19. D. Zhu, R. Xiao, R. Tao and W. Liu, Impact of guide vane opening angle on the flow stability in a pump-turbine in pump mode, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231 (13) (2016) 2484–2492.

    Google Scholar 

  20. B. S. Thapa, C. Trivedi and O. G. Dahlhaug, Design and development of guide vane cascade for a low speed number Francis turbine, Journal of Hydrodynamics, 28 (4) (2016) 676–689.

    Article  Google Scholar 

  21. B. S. Thapa, O. G. Dahlhaug and B. Thapa, Effects of sediment erosion in guide vanes of Francis turbine, Wear, 390–391 (2017) 104–112.

    Article  Google Scholar 

  22. B. S. Thapa, O. G. Dahlhaug and B. Thapa, Flow measurements around guide vanes of Francis turbine: a PIV approach, Renewable Energy, 126 (2018) 177–188.

    Article  Google Scholar 

  23. S.-J. Kim, Y.-S. Choi, Y. Cho, J.-W. Choi and J.-H. Kim, Effect of blade thickness on the hydraulic performance of a Francis hydro turbine model, Renewable Energy, 134 (2019) 807–817.

    Article  Google Scholar 

  24. I. Iliev, Z. Markov and P. Popovski, Numerical Investigation of the “tandem cascade” effects for the flow through stay and guide vanes of a Francis turbine, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 41 (2) (2016) 169–176.

    Article  Google Scholar 

  25. J. Wu, K. Shimmei, K. Tani, K. Niikura and J. Sato, CFD-based design optimization for hydro turbines, Journal of Fluids Engineering, 129 (2) (2007) 159–168.

    Article  Google Scholar 

  26. D. Wilcox, Turbulence Modeling for CFD, DCW Industries, Inc. (1993).

  27. P. Durbin and B. Reif, Statistical Theory and Modeling for Turbulent Flows, John Wiley & Sons, Ltd. (2011).

  28. F. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA Journal, 32 (2) (1994) 1598–1605.

    Article  Google Scholar 

  29. D. Li, R. Gong, H. Wang, L. Han, X. Wei and D. Qin, Analysis of vorticity dynamics for hump characteristics of a pump turbine model, Journal of Mechanical Science and Technology, 30 (8) (2016) 3641–3650.

    Article  Google Scholar 

  30. T. M. P. Kumar and D. Chatterjee, Numerical study of turbulent flow over an S-shaped hydrofoil, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (9) (2008) 1717–1734.

    Google Scholar 

Download references

Acknowledgements

This work was supported by the Science and Technology Department of Sichuan Province [Grant No. 2021JDZH0001 and Grant No. 2020ZHCG0018].

Author information

Authors and Affiliations

  1. School of Energy and Power Engineering, Xihua University, Chengdu, 610039, China

    Xiaoming Chen, Xide Lai & Qiuqin Gou

  2. Key Laboratory of Fluid and Power Machinery, Ministry of Education, Xihua University, Chengdu, 610039, China

    Xiaoming Chen

  3. Sichuan Machinery Research and Design Institute (Group) Co., Ltd., Chengdu, 610063, China

    Dongmei Song

Authors
  1. Xiaoming Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Xide Lai
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Qiuqin Gou
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Dongmei Song
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Xiaoming Chen.

Additional information

Xiaoming Chen received his M.S. from Xihua University, China. He currently is a Lecturer in School of Energy and Power Engineering, Xihua University, China. He is also working on his Ph.D. in Mechanical Engineering at Southwest Petroleum University, China. His research interests include fluid machinery, heat transfer, and renewable energies.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, X., Lai, X., Gou, Q. et al. Effect of guide vane profile on the hydraulic performance of moderate low-specific-speed Francis turbine. J Mech Sci Technol 37, 1289–1300 (2023). https://doi.org/10.1007/s12206-023-0215-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-023-0215-1

Keywords

Search

Navigation