Abstract
In this study, we investigate the acoustic metamaterial (AMM) design for flow noise reduction when using a vacuum cleaner. The AMM was based on the principle of Helmholtz resonators, and metamaterial design variables were defined to reduce noise to approximately 1.5 and 2.5 kHz bands. An acoustic simulation was performed considering the thermoviscous effect using the designed AMM, and a transmission loss in the simulation results was calculated using the four-microphone method. Finally, noise experiments were performed on a vacuum cleaner equipped with metamaterial. Through this, the noise reduction performance of metamaterial predicted through simulations was verified, thereby showing the selective implementation of noise reduction in the desired frequency band.
Similar content being viewed by others
Abbreviations
- τ :
-
Transmittance
- TL :
-
Transmtion loss
- k :
-
Wavenumber
- c :
-
Sound velocity
- ρ 0 :
-
Density of air
References
S. B. Lee, Perspective of international standard for the determination of fan sound power level and fan noise theory, Magazine of the Society of Air-conditioning and Refrigeration Engineers of Korea, 26(6) (1997) 481–490.
J. J. Jung, T. J. Cho and M. J. Choi, A study on noise and acoustic absorption characteristics of a vacuum cleaner on the lines of additional acoustic absorbent, Proceedings of the Korean Society for Precision Engineering Annual Spring Conference (2007) 597–598.
J. M. Joo, J. H. Lee, S. G. Hong, J. K. Oh and H. G. Song, Low noise vacuum cleaner design, Proceedings of the Korean Society for Noise and vibration Engineering Annual Autumn Conference (2007) 939–942.
S. S. Park, J. S. Hwang, J. S. Son and J. S. Choi, A noise reduction structure for a vacuum cleaner, Proceedings of the Korean Society for Noise and vibration Engineering Annual Autumn Conference (1994) 71–79.
I. S. Park, C. H. Sohn, S. Lee and J. K. Oh, Reduction of flow-induced noise in suction nozzle of a vacuum cleaner by adopting a cross-flow fan, Proceedings of the Korean Society for Noise and vibration Engineering Annual Autumn Conference (2007) 935–938.
W. H. Jeon, S. J. Beak and C. J. Jim, A study on the identification of aeroacoustics noise and noise reduction for a vacuum cleaner, Transactions of the Korean Society for Noise and Vibration Engineering, 13(6) (2003) 460–466.
G. Ma and P. Sheng, Acoustic metamaterials: from local resonances to broad horizons, Science Advances, 2 (2) (2016).
H. J. Kim, Y. S. Jung, S. S. Cho, S. G. Park and I. P. Hong, Design of lightweight acoustic meta structures operating at low frequency, The Journal of Korean Institute of Information Technology, 18(4) (2020) 59–67.
S. Varanasi, J. Bolton and T. Siegmund, Random incidence transmission loss of a metamaterial barrier system, Materials Science (2014).
A. Nateghi, L. Sangiuliano, C. Claeys, E. Deckers, B. Pluymers and W. Desmet, Design and experimental validation of a metamaterial solution for improved noise and vibration behavior of pipes, Journal of Sound and Vibration, 455 (2019) 96–117.
A. P. Dowling and J. E. F. Williams, Sound and Sources of Sound, Ellis Horwood Limited (1983).
L. E. Kinsler, A. R. Frey, A. B. Coppens and J. V. Sanders, Fundamentals of Acoustics, John Wiley & SCNS, INC (2000).
S. H. Lee and O. B. Wright, Origin of negative density and modulus in acoustic metamaterials, Physical Review B, 93 (2) (2016).
A. D. Pierce, Acoustics: An Introduction to its Physical Principles and Applications, Acoustical Society of America (1989).
D. T. Blackstock, Fundamentals of Physical Acoustics, John Wiley and Sons (2000).
ASTM International, ASTM E2611-09, Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method (2017).
M. Oblak and M. Pirnat, Applications and limitations of a four-microphone impedance tube in the liquid media in the low-frequency range, INTER-NOISE and NOISE-CON Congress and Conference Proceedings (2019) 3723–3734.
K. J. Soo, Noise and Vibration Engineering, Sejin Publication (2013).
ISO, ISO 3744, Acoustics-Determination of Sound Power Levels of Noise Sources Using Sound Pressure-Engineering Method in an Essentially Free Field Over a Reflecting Plane, 3rd Ed. (2010).
H. Kim and A. Selamet, Acoustic performance of a Helmholtz resonator with the flow, International Journal of Vehicle Noise and Vibration, 7(4) (2011) 285–305.
H. Kim and A. Selamet, Effect of flow on a dual Helmholtz resonator, Journal of Mechanical Science and Technology, 34 (2020) 581–588.
Acknowledgements
This work was supported by LG Electronics (202003870001) and the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2020R1F1A1074404).
Author information
Authors and Affiliations
Corresponding author
Additional information
Ki Yong An worked as an NVH engineer in the LG Electronics R&D Center. He received an M.S. degree in automotive engineering from Ulsan University. Since 2012, he has currently been working as a senior engineer in LGE. His primary research fields are noise & vibration simulation and experiments of home appliance products.
Hojin Kwon graduated in the Department of Mechanical Engineering at Pusan National University. Now he is studying for master degree. His current research include noise and vibration.
Jun-Young Jang recieved B.S. and M.S. degrees from Pusan National University in 2018 and 2020, respectively. He is currently majoring in noise and vibation in Pusan National University. His current research interests include the acoustic metamaterial and measurement & signal processing.
Kyungjun Song worked as an Assistant Professor in the Department of Mechanical Engineering at Pusan National University. He received a Ph.D. in mechanical engineering from the University of Michigan. His research interests include mechanical meta-structures, acoustics & vibration control, novel control of mechanical wave.
Rights and permissions
About this article
Cite this article
An, K.Y., Kwon, H., Jang, JY. et al. Acoustic metamaterial design for noise reduction in vacuum cleaner. J Mech Sci Technol 36, 5353–5362 (2022). https://doi.org/10.1007/s12206-022-1002-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-022-1002-0