Abstract
A negative pressure is formed inside the brake booster in a running diesel vehicle by using a rotary vane vacuum pump. In vacuum pump design, it is important to reduce the time required to induce the minimum negative pressure required for immediate consecutive braking and to reduce the torque used to drive the pump. In this study, a numerical simulation model to predict the performance of a vacuum pump was developed and experimentally validated by comparing the pump’s drive torque and the time required by a 4 L chamber to reach the target pressure. The housing profile was obtained via 3D scanning, while the check valve, bypass hole, and groove, which significantly affect the pump performance, were mathematically described. The model was validated by comparing the vacuum chamber pressure variation and the average torque. Similarly, the pump performance with respect to changes in major design factors, such as check valve and bypass hole shapes, were compared against the experimental data. In addition, the pump performance was predicted as a function of the housing profile shape, which is difficult to evaluate experimentally, and a new profile shape to improve the performance was proposed.
Similar content being viewed by others
References
S. R. Nagendiran, J. Sureshkumar, R. Sivanantham and H. Pandarinath, Performance optimization of vacuum pump for a diesel engine for Euro V application by experiments, SAE International, 01–0071 (2011).
S. H. Lee and H. Y. Jeong, Study on the driving torque and target pressure time of a rotary vane pump for brake booster, Journal of Mechanical Science and Technology, 31 (12) (2017) 5863–5869.
M. Rundo and R. Squarcini, Modelling and simulation of brake booster vacuum pumps, SAE International, 01–9016 (2013).
S. Manco, N. Nervegna and M. Rundo, Modelling and simulation of variable displacement vane pumps for IC engine lubrication, SAE International, 01–1601 (2004).
B. Guo, Y. Zhao, L. Li and P. Shu, Research on cylinder profile of rotary vane compressor, Journal of Xianjiaotong University, 37 (3) (2003) 256–259.
Y. He, X. Liu and X. Zhou, The design of rotary vane compressor with three chambers, Mechanical Research & Application, 19 (6) (2006) 81–83.
L. Li, Y. Zhao, B. Guo, P. Shu, J. Shen and S. He, Wrap of cylinder and its effect on main features of rotary vane compressor for automobile air conditioning system, International Journal of Refrigeration, 26 (2003) 566–574.
H. Lee, J. Lee, H. Heo, B. Hwang, J. Lee and H. Kim, Evaluation of hydraulic performance of vane type vacuum pump, The Korean Society of Automotive Engineering, Spring Conference, May (2014) 590–595.
Y. Choung, S. Bae, H. Heo, H. Lee, D. Lee and D. Kim, Performance evaluation of vane type steering oil pump for HEV bus, The Korean Society of Automotive Engineering (2011) 1745–1750.
M. Kwak, H. Cho and J. Kim, Analytical study on performance characteristics of variable vane type pump for automobile oil, The Korean Society of Mechanical Engineers, KSME2012R1013, 37–40.
H.-P. Cheng, R.-Y. Jou, F.-Z Chen, Y.-W. Chang, M. Iwane and T. Hanaoka, Flow investigation of Siegbahn vacuum pump by CFD methodology, Vacuum, 53 (1999) 227–231.
S. H. Lee, N. Hur and B. Y. Jin, Numerical analysis on flow characteristics of a vane pump, Korean Society for Fluid Machinery, 10 (1) (2007) 34–40.
S. H. Lee and N. Hur, Numerical study on effects of design factors on flow characteristics of a vane pump, Korean Society for Fluid Machinery, 10 (6) (2007) 24–31.
T. E. Lim and K. B. Lee, Numerical analysis of flow fields for optimum design of vehicle vacuum pump with multivanes, The Korean Society of Mechanical Engineers, A 35 (9) (2011) 883–890.
E. Kreyszig, Advanced engineering mathematics, Tenth Edition, International Student Version, John Wiley and Sons, New York, USA (2011).
C. Borgnakke and R. E. Sonntag, Fundamentals of thermodynamics, Eighth Edition, SI Version, John Wiley and Sons, New York, USA (2013).
B. R. Munson, D. F. Young, T. H. Okiishi and W. W. Huebsch, Fundamentals of fluid mechanics, Sixth Edition, SI Version, John Wiley and Sons, New York, USA (2009).
J. M. Gere and B. J. Goodno, Mechanics of materials, Eighth Edition, Cengage Learning (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Jungil Lee
Seung-Hwan Lee received his Ph.D. in Mechanical Engineering from Sogang University, Seoul, S. Korea, in 2018. His research interests are in Structure Analysis and Optimal Design.
Hyun-Yong Jeong is a Professor at Department of Mechanical Engineering, Sogang University, Seoul, S. Korea. His major areas are automotive safety, material modeling, finite element analysis, and design of experiments.
Rights and permissions
About this article
Cite this article
Lee, SH., Jeong, HY. A study on the development of a numerical model for a rotary vane vacuum pump for brake boosters. J Mech Sci Technol 32, 3677–3685 (2018). https://doi.org/10.1007/s12206-018-0720-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-0720-9