Advertisement

Journal of Mechanical Science and Technology

, Volume 32, Issue 2, pp 717–722 | Cite as

Numerical analysis of particle concentration around the air-inlet of a train in a tunnel by using a discrete phase model

  • Jihye Choi
  • Hyeong-U Kim
  • Sungjun Yang
  • Taesung Kim
Article

Abstract

Subways are used for public transportation as a commuting medium in Korea. Subway trains operate mainly through tunnels. Fine particles generated by friction between rails and train wheels affect the air quality inside a train because the particles enter the ventilation system of the train passing through a tunnel. The PM10 concentration has been mainly used to evaluate indoor air quality, and the PM2.5 concentration has measured recently. Therefore, in this study, the concentrations of the particles entering the air-inlet with respect to particle sizes including 0.1, 1, 2.5 and 10 μm were investigated by using numerical analysis with ANSYS FLUENT software. The particle analysis was performed corresponding to 10, 40 and 80 km/h. It is expected that the numerical results would be helpful in studying the effect of particles corresponding to PM2.5 on the ventilation system, to improve the air quality inside a train passing through a tunnel.

Keywords

Train Tunnel Numerical analysis Discrete phase model Particle concentration 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    N. E. Klepeis, W. C. Nelson, W. R. Ott, J. P. Robinson, A. M. Tsang, P. Switzer, J. V. Behar, S. C. Hern and W. H. Engelmann, The National human activity pattern survey (NHAPS): A resource for assessing exposure to environmental pollutants, Journal of Exposure Science and Environmental Epidemiology, 11 (3) (2001) 231.CrossRefGoogle Scholar
  2. [2]
    S. B. Kwon, Y. M. Cho, D. S. Park and E. Y. Park, Study on the indoor air quality of seoul metropolitan subway during the rush hour, Indoor and Built Environment, 17 (4) (2008) 361-369.Google Scholar
  3. [3]
    D. U. Park and K. C. Ha, Characteristics of PM10, PM2.5, CO2 and CO monitored in interiors and platforms of subway train in Seoul, Korea, Environ International, 34 (5) (2008) 629–634.CrossRefGoogle Scholar
  4. [4]
    P. S. Gilmour, D. M. Brown, T. G. Lindsay, P. H. Beswick, W. MacNee and K. Donaldson, Adverse health effects of PM10 particles: involvement of iron in generation of hydroxyl radical, Occupational and Environmental Medicine, 53 (12) (1996) 817–822.CrossRefGoogle Scholar
  5. [5]
    K. Y. Kim, Y. S. Kim, Y. M. Roh, C. M. Lee and C. N. Kim, Spatial distribution of particulate matter (PM10 and PM2.5) in Seoul Metropolitan Subway stations, Journal of Hazard Mater, 154 (2008) 440–443.CrossRefGoogle Scholar
  6. [6]
    H. J. Jung, B. H. Kim, J. Y. Ryu, S. Maskey, J. C. Kim, J. R. Sohn and C. U. Ro, Source identification of particulate matter collected at underground subway stations in Seoul, Korea using quantitative single-particle analysis, Atmospheric Environment, 44 (19) (2010) 2287–2293.CrossRefGoogle Scholar
  7. [7]
    J. Sundh, U. Olofsson, L. Olander and A. Jansson, Wear rate testing in relation to airborne particles generated in a wheelrail contact, Lubrication Science, 21 (4) (2009) 135–150.CrossRefGoogle Scholar
  8. [8]
    Y. S. Son, J. S. Jeon, H. J. Lee, I. C. Ryu and J. C. Kim, Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, Journal of the Air & Waste Management Association, 64 (9) (2014) 1054–1061.CrossRefGoogle Scholar
  9. [9]
    Y. Huang, T. H. Hong and C. N. Kim, A numerical simulation of train-induced unsteady airflow in a tunnel of Seoul subway, Journal of Mechanical Science and Technology, 26 (3) (2012) 785–792.CrossRefGoogle Scholar
  10. [10]
    Y. D. Huang, C. Li and C. N. Kim, A numerical analysis of the ventilation performance for different ventilation strategies in a subway tunnel, Journal of Hydrodynamics, 24 (2) (2012) 193–201.CrossRefGoogle Scholar
  11. [11]
    J. Y. Kim and K. Y. Kim, Experimental and numerical analyses of train-induced unsteady tunnel flow in subway, Tunnelling and Underground Space Technology, 22 (2) (2007) 166–172.CrossRefGoogle Scholar
  12. [12]
    K. B. Lee, J. S. Park, M. D. Oh, S. J. Bae and S. D. Kim, Field measurement and estimation of ventilation flow rates by using train-induced flow rate through subway vent shafts, Journal of Mechanical Science and Technology, 28 (7) (2014) 2677–2686.CrossRefGoogle Scholar
  13. [13]
    Y. S. Kim, H. S. Chung, H. M. Jeong, S. K. Song, C. S. Yi and S. H. Choi, Experimental study on a fixed type natural ventilator, International Journal of Air-conditioning and Refrigeration, 24 (3) (2016) 1650016.CrossRefGoogle Scholar
  14. [14]
    J. Mao, W. Wang, J. Zhang and Y. Liu, Numerical and effective method for the contact stress calculation of elliptical partial slip, Journal of Mechanical Science and Technology, 29 (2) (2015) 507–525.CrossRefGoogle Scholar
  15. [15]
    S. J. Baik, J. Y. Cho, S. B. Choi and J. S. Lee, Numerical investigation of the effects of geometric parameters on transverse motion with slanted-groove micro-mixers, Journal of Mechanical Science and Technology, 30 (8) (2016) 3729–3739.CrossRefGoogle Scholar
  16. [16]
    S. Gupta, M. Pavageau and J. C. Elicer-Cortés, Cellular confinement of tunnel sections between two air curtains, Building and Environment, 42 (9) (2007) 3352–3365.CrossRefGoogle Scholar
  17. [17]
    M. Juraeva, K. J. Ryu, S. H. Jeong and D. J. Song, Influences of the train-wind and air-curtain to reduce the particle concentration inside a subway tunnel, Tunnelling and Underground Space Technology, 52 (2016) 23–29.CrossRefGoogle Scholar
  18. [18]
    M. Juraeva, J. H. Lee and D. J. Song, A computational analysis of the train-wind to identify the best position for the air-curtain installation, Journal of Wind Engineering and Industrial Aerodynamics, 99 (5) (2011) 554–559.CrossRefGoogle Scholar
  19. [19]
    M. Juraeva, K. J. Ryu, S. H. Jeong and D. J. Song, A computational analysis of the airflow in a twin-track subway tunnel with a sliding-curtain to improve ventilation performance, Journal of Mechanical Science and Technology, 27 (8) (2013) 2359–2365.CrossRefGoogle Scholar
  20. [20]
    M. Juraeva, K. J. Ryu, S. H. Jeong and D. J. Song, Numerical optimization study to install air curtain in a subway tunnel by using design of experiment, Journal of Mechanical Science and Technology, 28 (1) (2014) 183–190.CrossRefGoogle Scholar
  21. [21]
    ANSYS, Inc., Theory guide. ANSYS FLUENT 12.0 user’s guide (2009).Google Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Jihye Choi
    • 1
  • Hyeong-U Kim
    • 2
  • Sungjun Yang
    • 3
  • Taesung Kim
    • 1
    • 2
  1. 1.School of Mechanical EngineeringSungkyunkwan UniversitySuwonKorea
  2. 2.SKKU Advanced Institute of Nanotechnology (SAINT)Sungkyunkwan UniversitySuwonKorea
  3. 3.Hyundai ElevatorIcheonKorea

Personalised recommendations