Abstract
This paper demonstrates a probabilistic modelling approach for establishing the correlation of Heat transfer fluid (HTF) temperature, obtained at the exit of a linear Parabolic trough collector (PTC). For the purpose, an analytical heat transfer (Physical) model was developed and validated by comparing its result with the published values. The correlation was then fitted on a dataset obtained by simulating this physical model over the sampled values acquired by applying the Latin hypercube sampling (LHS) technique over a realistic distribution of factors. The preliminary correlation was based on twenty-six natural, design and operational factors, including normal solar radiation, HTF flow rate, ambient conditions and different attributes associated with geometry and material of the concentrating reflector, receiver, sleeve and selective coating. The coefficient of determination (R2) for correlation was 98.4 %. After analyzing the significance of each factor, a simplified correlation was proposed with only nine factors. The applications associated with this work include the design and simulation of direct and indirect steam generation systems, solar-assisted power generation, space heating, cooling, refrigeration and desalination.
Similar content being viewed by others
References
R. Forristall, Heat transfer analysis and modeling of a parabolic trough solar receiver implemented in engineering equation solver, NREL (2003).
S. A. Klein and F. L. Alvarado, Engineering equation solver, F-Chart Software, Madison, WI 1 (2002).
R. V. Padilla, G. Demirkaya, D. Y. Goswami, E. Stefanakos and M. M. Rahman, Heat transfer analysis of parabolic trough solar receiver, Applied Energy, 88 (2011) 5097–5110.
M. Ouagued and A. Khellaf, Simulation of the temperature and heat gain by solar parabolic trough collector in algeria, International Journal of Mathematical, Computational, Natural and Physical Engineering, 6 (7) (2012) 16–22.
F. Zaversky, J. Garcı, M. Sánchez and D. Astrain, Probabilistic modeling of a parabolic trough collector power plant–An uncertainty and sensitivity analysis, Solar Energy, 86 (2012) 2128–2139.
C. K. Ho, S. S. Khalsa and G. J. Kolb, Methods for probabilistic modeling of concentrating solar power plants, Solar Energy, 85 (2011) 669–675.
P. J. Martínez and J. M. Pinazo, A method for obtaining performance correlations of absorption machines, International Journal of Thermal Sciences, 42 (2003) 379–384.
S. Khodadadi, A. Ghanavati, M. R. Assari, M. Hatami and D. D. Ganji, Experimental study on the water inlet and outlet position of a solar collector reservoir for maximum efficiency, Journal of Mechanical Science and Technology, 29 (5) (2015) 2279–2284.
V. Dudley, G. Kolb, M. Sloan and D. Kearney, SEGS LS2 solar collector — Test results, USA (1994).
V. Gnielinski, New equations for heat and mass transfer in turbulent pipe and channel flow, International Chemical Engineering, 16 (2) (1976) 359–363.
F. Incropera and D. De Witt, Fundamentals of heat and mass transfer, Sixth Edition, John Wiley & Sons (1990).
R. Siegel and J. Howell, Thermal radiation heat transfer, Fourth Edition, New York, NY: Taylor & Francis (2002).
H. Price, Concentrated solar power use in Africa, NREL (2001).
H. Price, E. Lupfert, D. Kearney, E. Zarza, G. Cohen and R. Gee, Advances in parabolic trough solar power technology, Journal of Solar Energy Engineering, 124 (2002) 109–125.
The Dow Chemical Company, Syltherm 800 heat transfer fluid product technical data.
N. U. Rehman and M. A. Siddiqui, Performance model and sensitivity analysis for a solar thermoelectric generator, Journal of Electronic Materials, 2017 (2017) 1–12.
N. U. Rehman and M. A. Siddiqui, Critical concentration ratio for solar thermoelectric generators, Journal of Electronic Materials, 10 (45) (2016) 5285–5296.
D. C. Montgomery and G. C. Runger, Applied statistics and probability for engineers, 6th Ed., New York: Wiley (2010) 481.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Youngsuk Nam
Muhammad Uzair received his M.Engg. degree in Energy Systems from the Department of Mechanical Engineering, NED University of Engineering & Technology, Karachi, Pakistan in 2008. He is currently engaged in research work related to solar energy and convective heat transfer. His main research interests include solar energy, CFD and thermofluids.
Naveed ur Rehman received his M.Engg. degree in Energy Systems from the department of Mechanical Engineering, NED University of Engineering & Technology, Karachi, Pakistan in 2010. He is currently engaged in research work related to solar thermoelectric power generation systems.
Syed Ahmad Raza received his B.Eng. and M.Eng. in Mechanical Engineering from NED University of Engineering and Technology, Karachi, Pakistan in 2008 and 2013. His research interests are CFD, thermofluids and renewable energy engineering.
Rights and permissions
About this article
Cite this article
Uzair, M., ur Rehman, N. & Raza, S.A. Probabilistic approach for estimating heat fluid exit temperature correlation in a linear parabolic trough solar collector. J Mech Sci Technol 32, 447–453 (2018). https://doi.org/10.1007/s12206-017-1245-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-017-1245-3