Skip to main content
SpringerLink
Log in

Acoustic emission characteristics of methacrylate-based composite and silorane-based composite during dental restoration according to a variety of C-factor

  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

Acoustic emission (AE) characteristics according to a variety of Configuration factor (C-factor) of methacrylate-based composite resin (Clearfil AP-X, Kuraray) and silorane-based composite resin (Filtek P90, 3M ESPE) during dental restoration were investigated in combination with the Finite element stress analysis (FESA). AE measurement results showed that most micro-cracks occurred within 1 min after the light irradiation started. As the C-factor increased, average cumulative AE hits and average cumulative AE energy increased. Those AE parameters for AP-X with high shrinkage strain were higher than P90 with low shrinkage strain. FESA results showed that the maximum shrinkage stress appeared at the resin/tooth interface on the specimen surface. The stress of AP-X was bigger than that of P90, which coincided with the AE behaviors with increasing C-factor.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. J. R. Bausch, De K. Lange and C. L. Davidson, Clinical significance of polymerization shrinkage of composite resins, The Journal of Prosthetic Dentistry, 48 (1) (1982) 59–67.

    Article  Google Scholar 

  2. C. J. Kleverlaan and A. J. Feilzer, Polymerization shrinkage and contraction stress of dental resin composites, Dental Materials, 21 (12) (2005) 1150–1157.

    Article  Google Scholar 

  3. N. Ilie, K. H. Kunzelmann and R. Hickel, Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage, Dental Materials, 22 (7) (2006) 593–601.

    Article  Google Scholar 

  4. M. Iga, F. Takeshige, T. Ui, M. Torii and Y. Tsuchitani, The relationship between polymerization shrinkage measured by a modified dilatometer and the inorganic filler content of light-cured composites, Dental Materials, 10 (1) (1991) 38–45.

    Article  Google Scholar 

  5. A. J. Feilzer, A. J. de Gee and C. L. Davidson, Increased wall to wall curing contraction in thin bonded resin layers, Journal of Dental Research, 68 (1) (1989) 48–50.

    Article  Google Scholar 

  6. A. J. Feilzer, A. J. de Gee and C. L. Davidson, Setting stress in composite resin in relation to configuration of the restoration, Journal of Dental Research, 66 (11) (1987) 1636–1639.

    Article  Google Scholar 

  7. S. H. Park, I. Krejci and F. Lutz, A comparison of micro hardness of resin composites polymerized by plasma arc or conventional visible light curing, Operative Dentistry, 27 (1) (2002) 30–37.

    Google Scholar 

  8. Y. C. Chung, K. S. Min, H. H. Lee, K. M. Cho and Y. B. Cho, A study of contraction shrinkage of composite resins and ormocers with various curing times, Journal of Korean Academy of Conservative Dentistry, 28 (4) (2003) 326–333.

    Article  Google Scholar 

  9. S. E. Song, S. H. Lim, Y. J. Yoon and K. W. Kim, A photoelastic evaluation of stress distribution during distal movement of upper molar, Korean Journal of Orthodontics, 34 (2) (2004) 121–129.

    Google Scholar 

  10. A. C. Obici, M. A. C. Sinhoreti, M. F. de Goes, S. Consai and L. C. Sobrinho, Effect of the photo-activation method on polymerization shrinkage of restorative composites, Operative Dentistry, 27 (2) (2002) 192–198.

    Google Scholar 

  11. J. H. Park and N. S. Choi, Behavior of polymerization shrinkage stress of methacrylate-based composite and si-lorane-based composite during dental restoration, Journal of the Korean Society for Composite Materials, 28 (1) (2015) 6–14.

    Google Scholar 

  12. M. Barink, P. C. P. Van der Mark, W. M. M. Fennis, R. H. Kuijs, C. M. Kreulen and N. Verdonscho, A threedimensional finite element model of the polymerization process in dental restorations, Biomaterials, 24 (8) (2003) 1427–1435.

    Article  Google Scholar 

  13. P. F. Hübsch, J. Middleton and A. J. Feilzer, Identification of the constitutive behaviour of dental composite cements during curing, Computer Methods in Biomechanics and Biomedical Engineering, 2 (4) (1999) 245–256.

    Article  Google Scholar 

  14. A. M. Vukicevic, K. Zelic, G. Jovicic, M. Djuric and N. Filipovic, Influence of dental restorations and mastication loadings on dentine fatigue behaviour: Image-based modelling approach, Journal of Dentistry, 43 (5) (2015) 556–567.

    Article  Google Scholar 

  15. H. Sano, T. Shono, H. Sonoda, T. Takatsu, B. Ciucchi and R. Carvalho, Relationship between surface-area for adhesion and tensile bond strength-Evaluation of a micro-tensile bond test, Dental Materials, 10 (4) (1994) 236–240.

    Article  Google Scholar 

  16. I. Krejci, M. Besek and F. Lutz, Clinical and SEM study of Tetric resin composite in posterior teeth: 12-month results, American Journal of Dentistry, 7 (1) (1994) 27–30.

    Google Scholar 

  17. F. R. Tay, K. M. Pang, A. J. Gwinnett and S. H. Wei, A method for microleakage evaluation along the dentin/ restorative interface, American Journal of Dentistry, 8 (2) (1995) 105–108.

    Google Scholar 

  18. N. Ereifej, N. Silikas and D. C. Watts, Initial versus final fracture of metal-free crowns, analyzed via acoustic emission, Dental Materials, 24 (9) (2008) 1289–1295.

    Article  Google Scholar 

  19. C. L. Lin, W. C. Kuo, J. J. Yu and S. F. Huang, Examination of ceramic restorative material interfacial debonding using acoustic emission and optical coherence tomography, Dental Materials, 29 (4) (2013) 382–388.

    Article  Google Scholar 

  20. B. Yang, J. Guo, Q. Huang, Y. Heo, A. Fok and Y. Wang, Acoustic properties of interfacial debonding and their relationship with shrinkage stress in Class-I restorations, Dental Materials, 32 (6) (2016) 742–748.

    Article  Google Scholar 

  21. S. J. Yoon, J. U. Gu, N. S. Choi and K. Arakawa, Influence of curing light power and energy on shrinkage force and acoustic emission characteristics of a dental composite restoration, American Journal of Dentistry, 26 (5) (2013) 260–264.

    Google Scholar 

  22. R. J. Kim, N. S. Choi, J. Ferracane and I. B. Lee, Acoustic emission analysis of the effect of simulated pulpal pressure and cavity type on the tooth-composite interfacial debonding, Dental Materials, 30 (8) (2014) 876–883.

    Article  Google Scholar 

  23. X. Z. Liu, H. Y. Li, J. Y. Li, P. J. Lu and A. S. L. Fok, An acoustic emission study on interfacial debonding in composite restorations, Dental Materials, 27 (9) (2011) 934–941.

    Article  Google Scholar 

  24. N. S. Choi, J. U. Gu and K. Arakawa, Acoustic emission characterization of the marginal disintegration of dental composite restoration, Composites Part a-Applied Science and Manufacturing, 42 (6) (2011) 604–611.

    Article  Google Scholar 

  25. N. S. Choi and J. U. Gu, Evaluation of marginal failures of dental composite restorations by acoustic emission analysis, Dental Materials Journal, 32 (3) (2013) 398–404.

    Article  Google Scholar 

  26. J. H. Park and N. S. Choi, Equivalent Young’s modulus of composite resin for simulation of stress during dental restoration, Dental Materials, 33 (2) (2017) e79–e85.

    Article  Google Scholar 

  27. F. P. Rodrigues, N. Silikas, D. C. Watts and R. Y. Ballester, Finite element analysis of bonded model Class I 'restorations' after shrinkage, Dental Materials, 28 (2) (2012) 123–132.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Graduate School, Hanyang University, Seoul, Korea

    Jung-Hoon Park & Ja-Uk Gu

  2. Department of Mechanical Engineering, Hanyang University, Ansan, Kyeonggi-do, Korea

    Nak-Sam Choi

Authors
  1. Jung-Hoon Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ja-Uk Gu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Nak-Sam Choi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nak-Sam Choi.

Additional information

Jung-Hoon Park is affiliated to Department of Mechanical Engineering, Graduate School, Hanyang University, Korea. His research area is composite analysis and material design.

Ja-Uk Gu is affiliated to Department of Mechanical Engineering, Graduate School, Hanyang University, Korea. He is currently working in Samsung Electronics. His research area is a nondestructive analysis of composites.

Nak-Sam Choi received his Ph.D. degree from Kyushu University, Japan, 1990. He is currently a Full-Professor in the Department of Mechanical Engineering, Hanyang University, Korea. His research interests include the fatigue behavior of materials and composites, acoustic emission analysis, experimental methods for composites manufacturing and reliability analysis.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Park, JH., Gu, JU. & Choi, NS. Acoustic emission characteristics of methacrylate-based composite and silorane-based composite during dental restoration according to a variety of C-factor. J Mech Sci Technol 31, 4067–4072 (2017). https://doi.org/10.1007/s12206-017-0801-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-017-0801-1

Keywords

Search

Navigation