Abstract
The resonance of the flexible vibration of car body, which has not been detected before on a passenger coach, occurred recently on a high-speed Electric multi units (EMU) when the train was running at 300 km/h on Beijing-Shanghai line. In this investigation, the force transmission from track to car body via suspensions is elaborated first with possibly induced factors briefly discussed. Both the measurements and experiments in field and in laboratory were conducted to evaluate the resonances and the excitation as well as transmission. Moreover, a three-dimensional railroad vehicle model was built in a computational non-linear Multibody system (MBS) framework, in which the car body flexibility was modeled using Finite element (FE) method. The model was validated and shows good agreements with measurements. Furthermore, the measured wheel and rail profiles were used to analyze the wheel/rail interaction for both new and worn states. The effects of the wheel-rail contact conditions on stabilities, dynamics and riding comforts were also examined. Feasible solutions were promoted to avoid the resonance and following by validating tests. It shows that the high frequency excitation arises from the hunting motion of bogie that closes to the modals of the car body, leads to the resonance of the structure of the car.
Similar content being viewed by others
References
W.-H. Zhang, The development of China’s high-speed railway systems and a study of the dynamics of coupled systems in high-speed trains, J. of Rail and Rapid Transit, 228 (4) (2014) 367–377.
UIC Kodex 515. Reisezugwagen Laufwerke, Ausgabe (1984).
S.-C. Sun et al., Study of carbody’s severe vibration based on stability analysis of vehicle system, China Railway Science, 33 (2) (2012) 82–88.
C.-H. Huang, J. Zeng and S.-L. Liang, Carbody hunting investigation of a high speed passenger car, JMST, 27 (8) (2013) 2283–2292.
X.-S. Jin et al., Key scientific problems in the study on running safety of high speed train, Engineering Mechanics, 26 (S2) (2009) 8–22,105.
Y. Li, W.-H. Zhang and W.-X. Zhou, Influence of wear of wheel profile on dynamic performance of EMU, J. of Southwest Jiaotong University, 45 (4) (2010) 549–554.
R. Luo et al., Running adaptability of high-speed EMU, J. of Traffic and Transportation Engineering, 11 (6) (2011) 37–43.
H. True, On the theory of nonlinear dynamics and its application in vehicle systems dynamics, Vehicle System Dynamics, 31 (5-6) (1999) 393–421.
R. M. Goodall and S. D. Iwnicki, Non-linear dynamic techniques v. equivalent conicity methods for rail vehicle stability assessment, Vehicle System Dynamics, 41 (S) (2004) 791–799.
O. Polach, Influence of wheel/rail contact geometry on the behaviour of a railway vehicle at stability limit, Proceedings of the ENOC-2005, Eindhoven, University of Technology, Netherlands (2005) 2203–2210.
O. Polach, On non-linear methods of bogie stability assessment using computer simulations, Proceedings of the Institution of Mechanical Engineers, Part F: J. of Rail and Transit, 220 (1) (2006) 13–27.
B. Zhang, J. Zeng and W. Liu, Research on stochastic stability and stochastic bifurcation of suspended wheelset, JMST, 29 (8) (2015) 3097–3107.
K. Sawley, C. Urban and R. Walker, The effect of hollowworn wheels on vehicle stability in straight track, Wear, 258 (7) (2005) 1100–1108.
D. Baldovin and S. Baldovin, The influence of the damping coefficients to the hunting motion stability of the bogies, Romanian J. of Acoustics and Vibration, 9 (1) (2012) 33–38.
M. Wrang, Instability phenomena of a passenger coach, caused by internal yaw damper flexibility, Vehicle System Dynamics, 33 (S) (1999) 406–417.
E. Scheunemann and X.-M. Wu, Wheel/rail geometry-the common subject of rail vehicles and track, Foreign Rolling Stock, 44 (2) (2007) 21–27.
K. Sawley and X.-M. Wu, Harmful concave worn wheel tread needing turning, Foreign Rolling Stock, 37 (3) (2000) 44–46.
H.-L Shi et al., Influence of equipment excitation on flexible carbody vibration of EMU, J. of Modern Transportation, 22 (4) (2014) 195–205.
H.-L Shi et al., Application of DVA theory in vibration reduction of carbody with suspended equipment for highspeed EMU, Science China Technological Science, 57 (7) (2014) 1425–1438.
A. H. Wickens, Fundamentals of rail vehicle dynamics: guidance and stability, Swets & Zeitlinger Publishers, Lisse (2003).
UIC Code 518. Testing and approval of railway vehicles from the point of view of their dynamic behaviour-safetyrack fatigue-ride quality, 2nd edition, International Union of Railways, Standard leaflet (2003).
GB5599-85, Railway vehicles–Specification for evaluation the dynamic performance and accreditation test (1985).
EN 15302:2008+A1:2010 (E), Railway applications -Method for determining the equivalent conicity (2010).
H. L. Shi, P. B. Wu and R. Luo, Coupled vibration characteristics of flexible car body and equipment of EMU, Journal of Southwest Jiaotong University, 49 (4) (2014) 519–525.
A. A. Shabana, Dynamics of multibody systems, 4th ed., Cambridge University Press, Cambridge, England (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Huailong Shi is a Ph.D. student at State Key Laboratory of Traction Power in Southwest Jiaotong University. His major is specialized in lab and field measurements on the dynamic performance of high-speed EMU, including wheel/rail interaction and suspensions as well as the flexible vibration of car body and liquid sloshing of a tank car.
Rights and permissions
About this article
Cite this article
Shi, H., Wu, P. Flexible vibration analysis for car body of high-speed EMU. J Mech Sci Technol 30, 55–66 (2016). https://doi.org/10.1007/s12206-015-1207-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-015-1207-6