Abstract
Yield surface distortion and its center movement were employed in a unified viscoplastic model to predict the ratcheting behavior of the 304 stainless steel. A combination of the Ohno-Wang model and the yield surface distortion model of Baltov and Sawczuk was used in uniaxial loading. Stress amplitude and the mean stress were varied in the tests to verify the model. Uniaxial loadings were simulated with and without consideration of yield surface distortion. Results from both simulations were compared. Yield surface distortion showed a significant effect on the simulation of the ratcheting responses.
Similar content being viewed by others
References
W. Prager, A new method of analyzing stresses and strains in work hardening plastic solids, Journal of Applied Mechanics, 23 (1956) 493–496.
P. J. Armstrong and C. O. Frederick, A mathematical representation of the multiaxialBauschinger effect, G.E.G.B. Report RD/B/N (1966) 731–747.
S. Bari and T. Hassan, Anatomy of coupled constitutive models for ratcheting simulation, International Journal of Plasticity, 16 (2000) 38–409.
H. Burlet and G. Cailletaud, Numerical techniques for cyclic plasticity at variable temperature, Engineering Computations, 3 (1986) 143–153.
J. L. Chaboche, K. Dang-Van and G. Cordier, Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel, Proceedings of the 5th International Conference on SMiRT, Div. L, Berlin, Germany (1979).
J. L. Chaboche, Time-independent constitutive theories for cyclic plasticity, International Journal of Plasticity, 2 (1986) 149–188.
J. L. Chaboche, On some modifications of kinematic hardening to improve the description of ratcheting effects, International Journal of Plasticity, 7 (1991) 661–678.
N. Ohno and J. D. Wang, Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior, International Journal of Plasticity, 9 (1993) 375–390.
N. Ohno and J. D. Wang, Kinematic hardening rules for simulation of ratcheting behaviour, European Journal of Mechanics, A/Solids,13 (4) (1994) 519–531.
M. Abdel-Karim and N. Ohno, Kinematic hardening model suitable for ratcheting with steady-state, International Journal of Plasticity, 16 (2000) 225–240.
S. Bari and T. Hassan, An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation, International Journal of Plasticity, 18 (2002) 873–894.
X. Chen and R. Jiao, Modified kinematic hardening rule for multiaxialratchetting prediction, International Journal of Plasticity, 20 (4–5) (2004) 871–898.
P. M. Naghdi and J. C. Rowley, An experimental study of biaxial stress- strain relation in plasticity, Journal of Mechanics and physics of Solids, 8 (1954) 63–80.
P. S. Theocaris and C. R. Hazell, Experimental investigation of subsequent yield surface using the Moire Method, Journal of Mechanics and physics of Solids, 13 (1965) 281–294.
A. Phillips and J. L. Tang, The effect of loading path on the yield surface at elevated temperatures, International Journal of Solids and Structures, 8 (4) (1972) 463–474.
A. Phillips, J. L. Tang and M. Ricciuti, Some observations on yield surfaces, Acta Mechanica, 20 (1974) 23–29.
A. Phillips and M. Ricciuti, Fundamental experiments in plasticity and creep of aluminum-Extension of previous results, International Journal of Solids and Structures, 12 (3) (1976) 159–171.
A. Phillips and C. W. Lee, Yield surface and loading surface experiments and recommendations, International Journal of Solids and Structures, 15 (1985) 715–729.
H. C. Wu and W. C. Yeh, On the experimental determination of yield surfaces and some results on annealed 304 stainless steel, International Journal of Plasticity, 7 (8) (1991) 803–826.
A. Baltov and A. Sawczuk, A rule of anisotropic hardening, Acta Mechanica, 1 (1964) 81–92.
E. Shiratori, K. Ikegami and F. Yoshida, Analysis of stressstrain relations by use of an anisotropic hardening plastic potential, Journal of Mechanics and physics of Solids, 27 (1979) 213–229.
M. Ortiz and E. P. Popov, Directional hardening rules for metal plasticity, Journal of Engineering Mechanics, 109 (1983) 1042–1057.
D. W. A. Rees, An examination of yield surface distortion and translation, Acta Mechanica, 52 (1984) 15–40.
T. Kurtyka and M. Zyczkowski, Evolution equations for distortional plastic hardening, International Journal of Plasticity, 12 (1996) 191–213.
H. P. Feigenbaum and Y. F. Dafalias, Directional distortional hardening in metal plasticity within thermodynamics, International Journal of Solids and Structures, 44 (2007) 7526–7542.
H. Rokhgireh and A. Nayebi, A new yield surface distortion model based on Baltov and Sawczuk’s model, Acta Mechanica, 224 (2013) 1457–1469.
H. Rokhgireh and A. Nayebi, Cyclic uniaxial and multiaxial loading with yield surface distortion consideration on prediction of ratcheting, Mechanics of Materials, 47 (2012) 61–74.
L. Taleb and G. Cailletaud, Cyclic accumulation of the inelastic strain in the 304L SS under stress control at room temperature: Ratcheting or creep, International Journal of Plasticity, 27 (2011) 1936–1958.
G. Kang, G. Qing and X. Yang, A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature, Mechanics of Materials, 34 (2002) 521–531.
G. Kang, Q. Gao and Y. Xianjie, Uniaxial and nonproportional multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations, International Journal of Nonlinear Mechanics, 39 (2004) 843–857.
G. Kang, Q. Kan, J. Zhang and Y. Sun, Time-dependent ratcheting experiments of SS304 stainless steel, International Journal of Plasticity, 22 (2006) 858–894.
G. Kang and Q. Kan, Constitutive modeling for uniaxial time-dependent ratcheting of SS304 stainless steel, Mechanics of Materials, 39 (2007) 488–499.
S. Syed, W. Jiang, C. Wang and M. I. Sabir, Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes (MWCNTs), Journal of Mechanical Science and Technology, 29 (2015) 291–296.
S. Golabi and H. Khazaali, Determining frustum depth of 304 stainless steel plates with various diameters and thicknesses by incremental forming, Journal of Mechanical Science and Technology, 28 (2015) 3273–3278.
M. Abdel-karim, Modified kinematic hardening rules for simulations of ratcheting, International Journal of Plasticity, 25 (2009) 1560–1587.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Seong Beom Lee
Nabi Ahmadi received his B.S. and M.S. degrees in Mechanical Engineering from Shiraz University in 2012 and 2014, respectively. His research interests include viscoplasticity, finite element analysis, and optimization.
Rights and permissions
About this article
Cite this article
Ahmadi, N., Nayebi, A. Predicting the ratcheting strain of 304 stainless steel by considering yield surface distortion and using a viscoplastic model. J Mech Sci Technol 29, 2857–2862 (2015). https://doi.org/10.1007/s12206-015-0614-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-015-0614-z