Abstract
This paper reports the design of a novel twisting-type micromirror actuation system. The actuating mechanism for driving the micromirror combines two paralleled bimorph actuators bending in opposite directions for rotational control of the micromirror. Each actuator is structured by gold and silicon dioxide or nickel and silicon nitride thin films with embedded polysilicon line heaters. With a size of only 15μm in width, 1.3μm in thickness, and 100μm in length, two bimorph actuators can result in a vertical displacement of 25μm at 10 volts dc with the span of 120μm, and thus the micromirror can rotate by angles over 20°, which is a significant improvement, compared to conventional tilting-type micromirrors.
Similar content being viewed by others
Reference
H. Hujita, Microactuators and Micromachines, Proceedings of the IEEE, 86(8) (1998) 1721–1732.
G. I. Papadimitriou, C. Papazoglou and A. S. Pomportsis, Optical Switching: Switch Fabrics, Techniques, and Architectures, Journal of Lightwave Technology, 21(2) (2003) 384–405.
S. Sundaram, M. Knapczyk, and H. Temkin, All-Optical Switch Based on Digital Micromirrors, Photonic Technology Letters, 15(6) (2003) 807–809.
C. Tsou, W. T. Lin, C. C. Fan and B. C. S. Chou, A Novel Self-Aligned Vertical Electrostatic Combdrives Actuator for Scanning Micromirrors, Journal of Micromechanics and Microengineering, 15(4) (2005) 855–860.
H. Schenk, P. Dürr, D. Kunze, H. Lakner and H. Kück, A Resonantly Excited 2D-Micro-Scanning-Mirror with Large Deflection, Sensors and Actuators A: Physical, 89(1–2) (2001) 104–111.
U. Krishnamoorthy, K. Li, K. Yu, D. Lee, J. P. Heritage and O. Solgaard, Dual-Mode Micromirrors for Optical Phased Array Applications, Sensors and Aactuators. A, Physical, 97–98 (2002) 21–26.
A. Nakai, K. Hoshino, K. Matsumoto and I. Shimoyama, Double-Sided Scanning Micromirror Array for Autostereoscopic Display, Sensors and Actuators A: Physical, 135(1) (2007) 80–85.
J. W. Judy and R. S. Muller, Magnetic Microactuation of Torsional Polysilicon Structures, Sensors and Actuators A: Physical, 53(1–3) (1996) 392–397.
A. D. Yalcinkaya, O. Ergeneman and H. Urey, Polymer Magnetic Scanners for Bar Code Applications, Sensors and Actuators A: Physical, 135(1) (2007) 236–243.
H. Kueppers, T. Leuerer, U. Schnakenberg, W. Mokwa, M. Hoffmann, T. Schneller, U. Boettger and R. Waser, PZT thin Films for Piezoelectric Microactuator Applications, Sensors and Actuators A: Physical, 97–98 (2002) 680–684.
F. Filhol, E. Defaÿ, C. Divoux, C. Zinck and M. T. Delaye, Resonant Micro-Mirror Excited by a Thin-Film Piezoelectric Actuator for Fast Optical Beam Scanning, Sensors and Actuators A: Physical, 123–124 (2002) 483–489.
S. Schweizer, S. Calmes, M. Laudon and P. Renaud, Thermally Actuated Optical Microscanner with Large Angle and Low Consumption, Sensors and Actuators A: Physical, 76(1–3) (1999) 470–477.
L.-A. Liew, A. Tuantranont and V. M. Bright, Modeling of Thermal Actuation in a Bulk-Micromachined CMOS Micromirror, Microelectronics Journal, 31(9–10) (2000) 791–801.
J. Funk, J. Buhler, J. G. Korvink and H. Baltes, Modeling of Thermomechanical Actuated Micromirror, Sensors and Actuators A: Physical, 47 (1/3) (1995) 632–636.
D. O. Popa, B. H. Kang, J. T. Wen, H. E. Stephanou, G. Skidmore and A. Geisberger, Dynamic Modeling and Input Shaping of Thermal Bimorph MEMS Actuators, Proceedings of IEEE International Conference on Robotics and Automation, Taipei, Taiwan, September 14–19 (2003) 1470–1475.
A. Jain, H. Qu, S. Todd and H. Xie, A thermal bimorph micromirror with large bi-directional and vertical actuation, Sensors and Actuators A: Physical, 122( 1) (2005) 9–15.
W. H. Chu, M. Mehregany and R. L. Mullen, Analysis of Tip Deflection and Force of a Bimetallic Cantilever Microactuator, Journal of Micromechanics and Microengineering, 3(1) (1993) 4–7.
R. W. Johnstone and M. Parameswran, Modelling Surface-Micromachined Electrothermal Actuators, Canadian Journal of Electrical and Computer Engineering, 29(3) (2004) 193–200.
A. Cabal, D. S. Ross, J. A. Lebens and D. P. Trauernicht, Thermal Actuator with Optimized Heater for Liquid Drop Ejectors, Sensors and Actuators A: Physical, 123–124 (2005) 531–539.
Intellisuite 8, Intellisense Software Corp, Boston, Massachusetts, USA (2005)
W. Tang, K. Xu, P. Wang, and X. Li, Residual Stress and Crystal Orientation in Magnetron Sputtering Au Films”; Materials Letters, 57( 20) (2003) 3101–3106.
R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, and S. Suresh, Some Critical Experiments on the Strain-Rate Sensitivity of Nanocrystalline Nickel, Acta Materialia, 51 (2003) 5159–5172.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Associate Editor Dongsik Kim
Dong Hyun Kim received his B.S. and M.S. degrees in Mechanical Engineering from Hongik University, Korea, in 2005 and 2007, respectively. Mr. Kim is currently graduate student in the department of Mechanical Engineering at Hongik University in Seoul, Korea. His research interests include micro and nanoscale heat transfer and silicon crystallization technologies for displays.
Kyung Su Oh received his B.S. and M.S. degrees in Mechanical Engineering from Hongik University, Korea, in 2005 and 2007, respectively. Mr. Oh is currently a research scientist at LG Chem. Ltd. His research interests include nanoscale heat transfer, nanotubes and fuel cells and molecular simulation technology.
Seungho Park received his B.S. and M.S. degrees in Mechanical Engineering from Seoul National University, Korea, in 1981 and 1983, respectively. He then received his Ph.D. degree from U.C. Berkeley, U.S.A. in 1989. Dr. Park is currently a Professor at the department of Mechanical and System Design Engineering at Hongik University in Seoul, Korea. He served as a director of general affairs of KSME. Dr. Park’s research interests include micro and nanoscale heat transfer, molecular dynamics simulation and silicon crystallization technologies for displays.
Rights and permissions
About this article
Cite this article
Kim, D.H., Oh, K.S. & Park, S. Design and analysis of a twisting-type thermal actuator for micromirrors. J Mech Sci Technol 23, 1536–1543 (2009). https://doi.org/10.1007/s12206-009-0113-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-009-0113-1