Abstract
Foam concrete has recently become a key construction material in terms of meeting the special needs of modern engineering applications such as thermal insulation, absorption of static and dynamic loads. In this study, the effect of polypropylene fiber content and various uni- and tri-axial compression loads on the toughness response of polypropylene fiber-reinforced foam concrete was investigated. Up to a certain strain level (0.1 mm/mm), the ultimate compression stress of specimens under uni- and tri-axial loading increased from about 1 MPa to 16 MPa with the increased target densities of foam concrete. There was a strain-hardening capability of low-density foam concrete while the specimens failed by strain-softening in the high-density series. The optimum fiber amounts were found to be 3.9%, 4.6%, and 6.4% for low, medium, and high target densities of foam concrete, respectively. At low-density series, the bubbles were observed to be relatively bigger and mostly merged with each other. A reduction in foam content (vice versa, increasing target density of mixture) and the presence of fiber resulted in smaller pore size and a more homogenous distribution of them in the matrix. In conclusion, the desired pore structure and efficient bridging of fibers in the matrix allowed the production of favorable foam concrete with higher toughness.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abed F, Alliafiz AR (2019) Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars. Composite Structures 215:23–34, DOI: https://doi.org/10.1016/j.compstruct.2019.02.050
AlShareedah O, Nassiri S (2021) Pervious concrete mixture optimization, physical, and mechanical properties and pavement design: A review. Journal of Cleaner Production 288:125095, DOI: https://doi.org/10.1016/j.jclepro.2020.125095
Amran M, Fediuk R, Vatin N, Huei Lee Y, Murali G, Ozbakkaloglu T, Klyuev S, Alabduljabber H (2020) Fibre-reinforced foamed concretes: A review. Materials 13(19):4323, DOI: https://doi.org/10.3390/ma13194323
Arslan S, Öksüzer N, Gökçe HS (2022) Improvement of mechanical and transport properties of reactive powder concrete using graphene nanoplatelet and waste glass aggregate. Construction and Building Materials 318:126199, DOI: https://doi.org/10.1016/j.conbuildmat.2021.126199
ASTM C1116-03 (2017) Standard specification for fiber-reinforced concrete and shotcrete. ASTM International, DOI: https://doi.org/10.1520/C1116-03
ASTM C869/C869M-11 (2016) Standard specification for foaming agents used in making preformed foam for cellular concrete. ASTM International, DOI: https://doi.org/10.1520/C0869_C0869M-11
ASTM D2166/D2166M (2016) Standard test method for unconfined compressive strength of cohesive soil. ASTM International, DOI: https://doi.org/10.1520/D2166-06
ASTM D2850 (2015) Standard test method for unconsolidated-undrained triaxial compression test on cohesive soils. ASTM International, DOI: https://doi.org/10.1520/D2850-03
Ban CC, Khalaf MA, Ramli M, Ahmed NM, Ahmad MS, Ahmed Ali AM, Dawood ET, Ameri F (2021) Modern heavyweight concrete shielding: Principles, industrial applications and future challenges; Review. Journal of Building Engineering 39:102290, DOI: https://doi.org/10.1016/j.jobe.2021.102290
Castillo-Lara JF, Flores-Johnson EA, Valadez-Gonzalez A, Herrera-Franco PJ, Carrillo JG, Gonzalez-Chi PI, Li QM (2020) Mechanical properties of natural fiber reinforced foamed concrete. Materials 13(14):3060, DOI: https://doi.org/10.3390/ma13143060
Chandrathilaka ERK, Baduge SK, Mendis P, Thilakarathna PSM (2021) Structural applications of synthetic fibre reinforced cementitious composites: A review on material properties, fire behaviour, durability and structural performance. Structures 34:550–574, DOI: https://doi.org/10.1016/j.istruc.2021.07.090
Choi J, Zi G, Hino S, Yamaguchi K, Kim S (2014) Influence of fiber reinforcement on strength and toughness of all-lightweight concrete. Construction and Building Materials 69:381–389, DOI: https://doi.org/10.1016/j.conbuildmat.2014.07.074
Demir İ, Gümüş M, Gökçe HS (2020) Gamma ray and neutron shielding characteristics of polypropylene fiber-reinforced heavyweight concrete exposed to high temperatures. Construction and Building Materials 257:119596, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119596
Dhasindrakrishna K, Ramakrishnan S, Pasupathy K, Sanjayan J (2021) Collapse of fresh foam concrete: Mechanisms and influencing parameters. Cement and Concrete Composites 122:104151, DOI: https://doi.org/10.1016/j.cemconcomp.2021.104151
Dunn TPA, van Zijl GPAG, van Rooyen AS (2018) Investigating a reinforced lightweight foamed concrete walling system for low-rise residential buildings in moderate seismic regions. Journal of Building Engineering 20:663–670, DOI: https://doi.org/10.1016/j.jobe.2018.09.011
Elemam WE, Abdelraheem AH, Mahdy MG, Tahwia AM (2020) Optimizing fresh properties and compressive strength of self-consolidating concrete. Construction and Building Materials 249:118781, DOI: https://doi.org/10.1016/j.conbuildmat.2020.118781
Falliano D, De Domenico D, Ricciardi G, Gugliandolo E (2019) Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density. Construction and Building Materials 198:479–493, DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.197
Fantilli AP, Mihashi H, Vallini P (2009) Multiple cracking and strain hardening in fiber-reinforced concrete under uniaxial tension. Cement and Concrete Research 39(12):1217–1229, DOI: https://doi.org/10.1016/j.cemconres.2009.08.020
Fediuk R, Amran M, Vatin N, Vasilev Y, Lesovik V, Ozbakkaloglu T (2021) Acoustic properties of innovative concretes: A review. Materials 14(2):398, DOI: https://doi.org/10.3390/ma14020398
Fu Q, Xu W, Huang D, He J, Zhang L, Kou H, Niu D (2021) Dynamic non-linear Mohr–Coulomb strength criterion for hybrid basalt-polypropylene fibre-reinforced concrete under impact loading. Archives of Civil and Mechanical Engineering 21(3):93, DOI: https://doi.org/10.1007/s43452-021-00248-w
Fu Y, Wang X, Wang L, Li Y (2020) Foam concrete: A state-of-the-art and state-of-the-practice review. Advances in Materials Science and Engineering 2020:6153602, DOI: https://doi.org/10.1155/2020/6153602
Gencel O, Bayraktar OY, Kaplan G, Arslan O, Nodehi M, Benli A, Gholampour A, Ozbakkaloglu T (2022) Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties. Construction and Building Materials 320:126187, DOI: https://doi.org/10.1016/j.conbuildmat.2021.126187
Gencel O, Kazmi SMS, Munir MJ, Kaplan Q Bayraktar OY, Yarar DO, Karimipour A, Ahmad MR (2021) Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation. Construction and Building Materials 306:124887, DOI: https://doi.org/10.1016/j.conbuildmat.2021.124887
Ghorbani S, Ghorbani S, Tao Z, de Brito J, Tavakkolizadeh M (2019a) Effect of magnetized water on foam stability and compressive strength of foam concrete. Construction and Building Materials 197:280–290, DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.160
Ghorbani S, Sharifi S, de Brito J, Ghorbani S, Jalayer MA, Tavakkolizadeh M (2019b) Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete. Construction and Building Materials 207:28–40, DOI: https://doi.org/10.1016/j.conbuildmat.2019.02.098
Gökçe HS, Hatungimana D, Ramyar K (2019) Effect of fly ash and silica fume on hardened properties of foam concrete. Construction and Building Materials 194:1–11, DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.036
Gökçe HS, Öztürk BC, Çam NF, Andiç-Çakır Ö (2018a) Gamma-ray attenuation coefficients and transmission thickness of high consistency heavyweight concrete containing mineral admixture. Cement and Concrete Composites 92:56–69, DOI: https://doi.org/10.1016/j.cemconcomp.2018.05.015
Gökçe HS, Tuyan M, Nehdi ML (2021) Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review. Construction and Building Materials 303:124483, DOI: https://doi.org/10.1016/j.conbuildmat.2021.124483
Gökçe HS, Yalçınkaya Ç, Tuyan M (2018b) Optimization of reactive powder concrete by means of barite aggregate for both neutrons and gamma rays. Construction and Building Materials 189:470–477, DOI: https://doi.org/10.1016/j.conbuildmat.2018.09.022
Hajimohammadi A, Ngo T, Mendis P (2018) Enhancing the strength of pre-made foams for foam concrete applications. Cement and Concrete Composites 87:164–171, DOI: https://doi.org/10.1016/j.cemconcomp.2017.12.014
Hamdany AH, Ding Y, Qian S (2021) Mechanical and antibacterial behavior of photocatalytic lightweight engineered cementitious composites. Journal of Materials in Civil Engineering 33(10):04021262, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0003886
Hou D, Li D, Hua P, Jiang J, Zhang G (2019) Statistical modelling of compressive strength controlled by porosity and pore size distribution for cementitious materials. Cement and Concrete Composites 96:11–20, DOI: https://doi.org/10.1016/j.cemconcomp.2018.10.012
Huang B-T, Weng K-F, Zhu J-X, Xiang Y, Dai J-G, Li VC (2021) Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa. Composites Communications 26:100775, DOI: https://doi.org/10.1016/j.coco.2021.100775
Huang J, Su Q, Zhao W, Li T, Zhang X (2017) Experimental study on use of lightweight foam concrete as subgrade bed filler of ballastless track. Construction and Building Materials 149:911–920, DOI: https://doi.org/10.1016/j.conbuildmat.2017.04.122
Jones MR, Ozlutas K, Zheng L (2016) Stability and instability of foamed concrete. Magazine of Concrete Research 68(11):542–549, DOI: https://doi.org/10.1680/macr.15.00097
Kakooei S, Akil HM, Jamshidi M, Rouhi J (2012) The effects of polypropylene fibers on the properties of reinforced concrete structures. Construction and Building Materials 27(1):73–77, DOI: https://doi.org/10.1016/j.conbuildmat.2011.08.015
Kök S, Türetken M, Öksüzer N, Gökçe HS (2023) Effect of elevated temperature on radiation shielding properties of cement and geopolymer mortars including barite aggregate and colemanite powder. Materialia 27:101693, DOI: https://doi.org/10.1016/j.mtla.2023.101693
Li VC (2019) Engineered cementitious composites (ECC). Springer Berlin Heidelberg, Berlin, Heidelberg
Li J, Chen Z, Chen W, Xu Z (2020a) Seismic performance of pre-cast self-insulation shear walls made by a new type of foam concrete with high strength and low thermal conductivity. Structures 24:124–136, DOI: https://doi.org/10.1016/j.istruc.2020.01.001
Li J, Chen J, Wan C, Niu J (2021) Flexural toughness and evaluation method of steel fiber reinforced self-compacting lightweight aggregate concrete. Construction and Building Materials 277:122297, DOI: https://doi.org/10.1016/j.conbuildmat.2021.122297
Li J, Wu Z, Shi C, Yuan Q, Zhang Z (2020b) Durability of ultra-high performance concrete - A review. Construction and Building Materials 255:119296, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119296
Lim SK, Tan CS, Zhao X, Ling TC (2015) Strength and toughness of lightweight foamed concrete with different sand grading. KSCE Journal of Civil Engineering 19(7):2191–2197, DOI: https://doi.org/10.1007/s12205-014-0097-y
Liu Z, Zhao K, Hu C, Tang Y (2016) Effect of water-cement ratio on pore structure and strength of foam concrete. Advances in Materials Science and Engineering 2016:9520294, DOI: https://doi.org/10.1155/2016/9520294
Luhar S, Nicolaides D, Luhar I (2021) Fire resistance behaviour of geopolymer concrete: An overview. Buildings 11(3):82, DOI: https://doi.org/10.3390/buildings11030082
Madhwani H, Sathyan D, Mini KM (2021) Study on durability and hardened state properties of sugarcane bagasse fiber reinforced foam concrete. Materials Today: Proceedings 46:4782–4787, DOI: https://doi.org/10.1016/j.matpr.2020.10.313
Makul N (2020a) Modern sustainable cement and concrete composites: Review of current status, challenges and guidelines. Sustainable Materials and Technologies 25:e00155, DOI: https://doi.org/10.1016/j.susmat.2020.e00155
Makul N (2020b) Advanced smart concrete - A review of current progress, benefits and challenges. Journal of Cleaner Production 274:122899, DOI: https://doi.org/10.1016/j.jclepro.2020.122899
Marvila MT, de Azevedo ARG, de Matos PR, Monteiro SN, Vieira CMF (2021) Materials for production of high and ultra-high performance concrete: Review and perspective of possible novel materials. Materials 14(15):4304, DOI: https://doi.org/10.3390/ma14154304
Nguyễn HH, Luong Q-H, Choi J-I, Ranade R Li VC, Lee BY (2021) Ultra-ductile behavior of fly ash-based engineered geopolymer composites with a tensile strain capacity up to 13.7%. Cement and Concrete Composites 122:104133, DOI: https://doi.org/10.1016/j.cemconcomp.2021.104133
Öksüzer N, Anil Ö, Aldemir A, Şahmaran M (2021) Investigation of mechanical properties of high-performance hybrid fiber concretes adding nanomaterials using with coarse aggregate. Structures 33:2893–2902, DOI: https://doi.org/10.1016/j.istruc.2021.06.044
Omar MF, Abdullah MAH, Rashid NA, Abdul Rani AL (2020) Partially replacement of cement by sawdust and fly ash in lightweight foam concrete. IOP Conference Series: Materials Science and Engineering 743(1):012035, DOI: https://doi.org/10.1088/1757-899X/743/1/012035
Ouro Koura B-I, Hosseinpoor M, Yahia A, Kadri E-H, Kaci A (2020) A new proportioning approach of low and normal binder self-consolidating concrete based on the characteristics of fine mortar and granular skeleton. Construction and Building Materials 239:117892, DOI: https://doi.org/10.1016/j.conbuildmat.2019.117892
Peyvandi A, Sbia LA, Soroushian P, Sobolev K (2013) Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite. Construction and Building Materials 48:265–269, DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.094
Raj A, Sathyan D, Mini KM (2021) Performance evaluation of natural fiber reinforced high volume fly ash foam concrete cladding. Advances in Concrete Construction 11(2):151–161, DOI: https://doi.org/10.12989/acc.2021.11.2.151
Raj B, Sathyan D, Madhavan MK, Raj A (2020) Mechanical and durability properties of hybrid fiber reinforced foam concrete. Construction and Building Materials 245:118373, DOI: https://doi.org/10.1016/j.conbuildmat.2020.118373
Reddy PN, Kavyateja BV, Jindal BB (2021) Structural health monitoring methods, dispersion of fibers, micro and macro structural properties, sensing, and mechanical properties of self-sensing concrete-A review. Structural Concrete 22(2):793–805, DOI: https://doi.org/10.1002/suco.202000337
Şensoy AT, Gökçe HS (2020) Simulation and optimization of gamma-ray linear attenuation coefficients of barite concrete shields. Construction and Building Materials 253:119218, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119218
She W, Du Y, Zhao G, Feng P, Zhang Y, Cao X (2018) Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds. Construction and Building Materials 170:153–166, DOI: https://doi.org/10.1016/j.conbuildmat.2018.02.207
Shi X, Huang J, Su Q (2020) Experimental and numerical analyses of lightweight foamed concrete as filler for widening embankment. Construction and Building Materials 250:118897, DOI: https://doi.org/10.1016/j.conbuildmat.2020.118897
Şimşek O, Pourghadri Sefidehkhan H, Gökçe HS (2022) Performance of fly ash-blended Portland cement concrete developed by using fine or coarse recycled concrete aggregate. Construction and Building Materials 357:129431, DOI: https://doi.org/10.1016/j.conbuildmat.2022.129431
Singh A, Sampath PV, Biligiri KP (2020) A review of sustainable pervious concrete systems: Emphasis on clogging, material characterization, and environmental aspects. Construction and Building Materials 261:120491, DOI: https://doi.org/10.1016/j.conbuildmat.2020.120491
Sun R, Wang D, Cao H, Wang Y, Lu Z, Xia J (2021) Ecological pervious concrete in revetment and restoration of coastal Wetlands: A review. Construction and Building Materials 303:124590, DOI: https://doi.org/10.1016/j.conbuildmat.2021.124590
Velichko E, Pustylnik O (2019) Modification of foam concrete with organo-mineral admixtures. Materials Science Forum 945:199–204, DOI: https://doi.org/10.4028/www.scientific.net/MSF.945.199
Wang X, Liu L, Shen W, Zhou H (2019b) CFRP reinforced foam concrete subjected to dynamic compression at medium strain rate. Materials 13(1):10, DOI: https://doi.org/10.3390/ma13010010
Wang ZZ, Jiang YJ, Zhu CA (2019a) Seismic energy response and damage evolution of tunnel lining structures. European Journal of Environmental and Civil Engineering 23(6):758–770, DOI: https://doi.org/10.1080/19648189.2017.1304283
Wei J, Li J, Wu C, Liu Z, Li J (2021) Hybrid fibre reinforced ultra-high performance concrete beams under static and impact loads. Engineering Structures 245:112921, DOI: https://doi.org/10.1016/j.engstruct.2021.112921
Wu G Chen W, Tan X, Zhao W, Jia S, Tian H, Yang J (2020a) Performance of new type of foamed concrete in supporting tunnel in squeezing rock. International Journal of Geomechanics 20(2):04019173, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0001543
Wu H, Lin X, Zhou A (2020b) A review of mechanical properties of fibre reinforced concrete at elevated temperatures. Cement and Concrete Research 135:106117, DOI: https://doi.org/10.1016/j.cemconres.2020.106117
Wu K, Shao Z, Qin S (2020c) A solution for squeezing deformation control in tunnels using foamed concrete: A review. Construction and Building Materials 257:119539, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119539
Xing Y, Huang B, Ning E, Zhao L, Jin F (2020) Quasi-static loading rate effects on fracture process zone development of mixed-mode (I-II) fractures in rock-like materials. Engineering Fracture Mechanics 240:107365, DOI: https://doi.org/10.1016/j.engfracmech.2020.107365
Xu L-Y, Huang B-T, Li VC, Dai J-G (2022) High-strength high-ductility engineered/strain-hardening cementitious composites (ECC/SHCC) incorporating geopolymer fine aggregates. Cement and Concrete Composites 125:104296, DOI: https://doi.org/10.1016/j.cemconcomp.2021.104296
Xue J, Briseghella B, Huang F, Nuti C, Tabatabai H, Chen B (2020) Review of ultra-high performance concrete and its application in bridge engineering. Construction and Building Materials 260:119844, DOI: https://doi.org/10.1016/j.conbuildmat.2020.119844
Yang D, Liu M, Ma Z (2020) Properties of the foam concrete containing waste brick powder derived from construction and demolition waste. Journal of Building Engineering 32:101509, DOI: https://doi.org/10.1016/j.jobe.2020.101509
Youness D, Mechaymech A, Al Wardany R (2021) Flow assessment and development towards sustainable self-consolidating concrete using blended basalt and limestone-cement systems. Journal of Cleaner Production 283:124582, DOI: https://doi.org/10.1016/j.jclepro.2020.124582
Zayed AM, Masoud MA, Shahien MG, Gökçe HS, Sakr K, Kansouh WA, El-Khayatt AM (2021) Physical, mechanical, and radiation attenuation properties of serpentine concrete containing boric acid. Construction and Building Materials 272:121641, DOI: https://doi.org/10.1016/j.conbuildmat.2020.121641
Zhao M, Zhao M, Chen M, Li J, Law D (2018) An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concrete. Construction and Building Materials 183:493–501, DOI: https://doi.org/10.1016/j.conbuildmat.2018.06.178
Zhou Y, Xi B, Sui L, Zheng S, Xing F, Li L (2019) Development of high strain-hardening lightweight engineered cementitious composites: Design and performance. Cement and Concrete Composites 104:103370, DOI: https://doi.org/10.1016/j.cemconcomp.2019.103370
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gökçe, H.S., Öksüzer, N., Kamiloğlu, H.A. et al. The Toughness of Polypropylene Fiber-Reinforced Foam Concrete under Various Uni- and Tri-Axial Compression Loads. KSCE J Civ Eng 27, 2982–2992 (2023). https://doi.org/10.1007/s12205-023-1345-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-023-1345-9