Abstract
To enhance the accuracy and reliability of the design calculation for reinforced concrete slope-stabilizing pile, a three-dimensional and threefold nonlinear numerical modeling method was proposed. Namely, in the three-dimensional modeling the material nonlinearity is considered with soil modeled with a nonlinear elastic model, and reinforced concrete pile with an advanced damaged plasticity model for the first time in particular. The boundary nonlinearity is considered by using the Coulomb friction to model the interactions on both soil-pile and soil-rock interfaces. And the geometry nonlinearity is taken into account by adopting the large deformation algorithm. In addition, a post-processing approach for the sectional bending moment of pile body is presented when a reinforced concrete pile is modeled with solid elements, and steel bars with truss elements embedded in concrete. The proposed method was successfully applied to model a pilot pile. The same ultimate bearing capacity as the test was obtained. Comparisons also show that the computed displacements and maximum moments agreed well with the measurements regardless of whether the pile was working in the elastic or damaged plastic state, and even the advent of cracking was identical with the test. In addition, the fluctuation phenomenon of moment diagrams of the pile body in the damaged plastic state as well as the spatial distribution of soil resistance were revealed for the first time. The outcomes highlighted the accuracy, reliability and efficiency of the proposed method.
Similar content being viewed by others
References
Baek SH, Kim J, Lee SH, Chung CK (2018) Development of the cyclic p–y curve for a single pile in sandy soil. Marine Georesources & Geotechnology 36(3):351–359, DOI: https://doi.org/10.1080/1064119X.2017.1318986
Bilgin Ö (2010) Numerical studies of anchored sheet pile wall behavior constructed in cut and fill conditions. Computers and Geotechnics 37(3):399–407, DOI: https://doi.org/10.1016/j.compgeo.2010.01.002
Chaloulos YK, Bouckovalas GD, Karamitros DK (2017) Trench effects on lateral p–y relations for pipelines embedded in stiff soils and rocks. Computers and Geotechnics 83(5):52–63, DOI: https://doi.org/10.1016/j.compgeo.2016.10.018
Chow YK (1996) Analysis of piles used for slope stabilization. International Journal for Numerical and Analytical Methods in Geomechanics 20(9):635–646, DOI: https://doi.org/10.1002/(SICI)1096-9853(199609)20:9<635::AID-NAG839>3.0.CO;2-X
Dai ZH (2002) Study on distribution laws of landslide-thrust and resistance of sliding mass acting on antislide piles. Chinese Journal of Rock Mechanics and Engineering 21(4):517–521 (in Chinese)
Dai ZH, Guo WD, Zheng GX, Ou Y, Chen YJ (2016) Moso bamboo soil-nailed wall and its 3D nonlinear numerical analysis. International Journal of Geomechanics 16(5):04016012, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0000634
Dai ZH, Zhang XY, Zou ST, Lu CJ, Zhen YP (2010) Field modeling of laterally distributed landslide thrusts over anti-slide piles. Chinese Journal of Geotechnical Engineering 32(10):1513–1518 (in Chinese)
Dassault Systèmes SIMULIA Corp (2017) ABAQUS analysis user’s manual. Providence RI
Duncan JM, Chang C (1970) Nonlinear analysis of stress and strains in soils. Journal of the Soil Mechanics and Foundations Division (ASCE) 96(5):1629–1653
Duncan JM, Seed RB, Wong KS, Ozawa U (1984) FEADAM: Computer program for finite element analysis of dams. Geotechnical Engineering Research Rep. No. SU/GT/84-03, Department of Civil Engineering, Stanford University
Genikomsou AS, Polak MA (2015) Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Engineering Structures 98:38–48, DOI: https://doi.org/10.1016/j.engstruct.2015.04.016
Guo WD (2013) Pu-based solutions for slope stabilizing piles. International Journal of Geomechanics (ASCE) 13(3):292–310, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0000201
Guo MW, Liu SJ, Wang SL, Yin SD (2020) Determination of residual thrust force of landslide using vector sum method. Journal of Engineering Mechanics 146(7):4020063, DOI: https://doi.org/10.1061/(ASCE)EM.1943-7889.0001791
Hassiotis S, Chameau JL, Gunaratne M (1997) Design method for stabilization of slopes with piles. Journal of Geotechnical and Geoenvironmental Engineering 123(4):314–323, DOI: https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(314)
Higgins W, Vasquez C, Basu D, Griffiths DV (2013) Elastic solutions for laterally loaded piles. Journal of Geotechnical and Geoenvironmental Engineering 139(7):1096–1103, DOI: https://doi.org/10.1061/(ASCE)GT.1943-5606.0000828
Hillerborg A, Modéer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research 6:773–782, DOI: https://doi.org/10.1016/0008-8846(76)90007-7
Ito T, Matsui T (1975) Methods to estimate lateral force acting on stabilizing piles. Soils Found 15(4):43–59, DOI: https://doi.org/10.3208/sandf1972.15.4_43
Jalali MM, Golmaei SH, Jalali MR, Borthwick A, Ahmadi MKZ, Moradi R (2012) Using finite element method for pile-soil interface (through PLAXIS and ANSYS). Journal of Civil Engineering and Construction Technology 3(10):256–272, DOI: https://doi.org/10.5897/JCECT12.024
Jeong S, Jeongsik P, Ko J, Kim B (2017) Analysis of soil resistance on drilled shafts using proposed cyclic p-y curves in weathered soil. Geomechanics and Engineering 12(3):505–522, DOI: https://doi.org/10.12989/gae.2017.12.3.505
JGJ55-2011 (2011) Specification for mix proportion design of ordinary concrete. Ministry of Housing and Urban-Rual Development of the People’s Republic of China, China Architecture & Building Press, Beijing, China (in Chinese)
Kahyaoğlu MR, Imançli G, Önal O, Kayalar AS (2012) Numerical analyses of piles subjected to lateral soil movement. KSCE Journal of Civil Engineering 16(4):562–570, DOI: https://doi.org/10.1007/s12205-012-1354-6
Kahyaoğlu MR, Imançli G, Özden G, Kayalar AS (2017) Numerical simulations of landslide-stabilizing piles: A remediation project in Söke, Turkey. Environmental Earth Sciences 76(19):656, DOI: https://doi.org/10.1007/s12665-017-6989-7
Kim Y, Jeong S (2011) Analysis of soil resistance on laterally loaded piles based on 3D soil-pile interaction. Computers and Geotechnics 38(2):248–257, DOI: https://doi.org/10.1016/j.compgeo.2010.12.001
Kmiecik P, Kamiński M (2011) Modeling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration. Archives of Civil and Mechanical Engineering 11(3): 623–636, DOI: https://doi.org/10.1016/S1644-9665(12)60105-8
Kourkoulis R, Gelagoti F, Anastasopoulos I, Gazetas G (2011) Slope stabilizing piles and pile-groups: Parametric study and design insights. Journal of Geotechnical and Geoenvironmental Engineering 137(7): 663–677, DOI: https://doi.org/10.1061/(ASCE)GT.1943-5606.0000479
Kourkoulis R, Gelagoti F, Anastasopoulos I, Gazetas G (2012) Hybrid method for analysis and design of slope stabilizing piles. Journal of Geotechnical and Geoenvironmental Engineering 138(1):1–14, DOI: https://doi.org/10.1061/(ASCE)GT.1943-5606.0000546
Lee J, Fenves GL (1998) Plastic-damage model for cyclic loading of concrete structures. Journal of Engineering Mechanics (ASCE) 124(8): 892–900, DOI: https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
Li KC, Chi SL (1997) Spatial nonlinear finite element analysis of slope-stabilizing pile and study on design parameters. Landslide Collection 12:18–29. Beijing: China Railway Publishing House (in Chinese)
Li CD, Wu JJ, Tang HM, Hu XL, Liu XW, Wang CQ, Liu T, Zhang YQ (2016) Model testing of the response of stabilizing piles in landslides with upper hard and lower weak bedrock. Engineering Geology 204:65–76, DOI: https://doi.org/10.1016/j.enggeo.2016.02.002
Li XC, Xu R Yang W, Li PA, Yang K, Zhang WY (2020) Experimental study on distribution of landslide thrust in pile-anchor structure based on photoelastic technique. Materials 13(6):1358, DOI: https://doi.org/10.3390/ma13061358
Lombardi D, Dash SR, Bhattacharya S, Ibraim E, Muir Wood D, Taylor CA (2016) Construction of simplified design p–y curves for liquefied soils. Géotechnique 67(3):216–227, DOI: https://doi.org/10.1680/jgeot.15-P-116
Lovera A, Ghabezloo S, Sulem J, Randolph MF, Kham M, Palix E (2021) Pile response to multi-directional lateral loading using P–y curves approach. Géotechnique 71(4):288–298, DOI: https://doi.org/10.1680/jgeot.18.P.297
Lubliner J, Oliver J, Oller S, Oñate E (1989) A plastic-damage model for concrete. International Journal of Solids and Structures 25(3): 229–326, DOI: https://doi.org/10.1016/0020-7683(89)90050-4
Murphy G, Igoe D, Doherty P, Gavin K (2018) 3D FEM approach for laterally loaded monopile design. Computers and Geotechnics 100:76–83, DOI: https://doi.org/10.1016/j.compgeo.2018.03.013
No. 2 Survey & Design Institute, Ministry of Railways (1980) Analysis report of No. 2 slope-stabilizing pilot pile in Shi-zi-shan Mountain. (in Chinese)
Poulos HG (1995) Design of reinforcing piles to increase slope stability. Canadian Geotechnical Journal 32(5):808–818, DOI: https://doi.org/10.1016/0148-9062(96)80104-5
Qiao SF, Xu P, Teng JD, Sun X (2020) Numerical study of optimal parameters on the high filling embankment landslide reinforced by the portal anti-slide pile. KSCE Journal of Civil Engineering 24(5): 1460–1475, DOI: https://doi.org/10.1007/s12205-020-1743-1
Rathod D, Muthukkumaran K, Sitharam TG (2018) Effect of slope on p–y curves for laterally loaded piles in soft clay. Geotechnical and Geological Engineering 36(3):1509–1524, DOI: https://doi.org/10.1007/s10706-017-0405-7
Reese L, Cox W (1969) Soil behavior from analysis of tests of uninstrumented piles under lateral loading. In Performance of deep foundations. ASTM International
Ribeiro F, Sena-Cruz J, Branco FG, Júlio E (2019) 3D finite element model for hybrid FRP-confined concrete in compression using modified CDPM. Engineering Structures 190:459–479, DOI: https://doi.org/10.1016/j.engstruct.2019.04.027
Rovithis E, Kirtas E, Pitilakis K (2009) Experimental p–y loops for estimating seismic soil-pile interaction. Bulletin of Earthquake Engineering 7(3):719–736, DOI: https://doi.org/10.1007/s10518-009-9116-7
Said I, De Gennaro V, Frank R (2009) Axisymmetric finite element analysis of pile loading tests. Computers and Geotechnics 36(1):6–19, DOI: https://doi.org/10.1016/j.compgeo.2008.02.011
Smethurst JA, Powrie W (2007) Monitoring and analysis of the bending behavior of discrete piles used to stabilize a railway embankment. Géotechnique 57(8):663–677, DOI: https://doi.org/10.1680/geot.2007.57.8.663
Summersgill FC, Kontoe S, Potts DM (2018) Stabilization of excavated slopes in strain-softening materials with piles. Géotechnique 68(7):626–639, DOI: https://doi.org/10.1680/jgeot.17.P.096
Wahalathantri BL, Thambiratnam DP, Chan T, Fawzia S (2011) A material model for flexural crack simulation in reinforced concrete elements using ABAQUS. Proceedings of the first international conference on engineering, designing and developing the built environment for sustainable wellbeing:260–264, Queensland University of Technology
Wang D, Bienen B, Nazem M, Tian YH, Zheng JB, Pucker T, Randolph MF (2015) Large deformation finite element analyses in geotechnical engineering. Computers and Geotechnics 65:104–114, DOI: https://doi.org/10.1016/j.compgeo.2014.12.005
White DJ, Thompson MJ, Suleiman MT, Schaefer VR (2008) Behavior of slender piles subject to free-field lateral soil movement. Journal of Geotechnical and Geoenvironmental Engineering 134(4):428–436, DOI: https://doi.org/10.1061/(ASCE)1090-0241(2008)134:4(428)
Won J, You K, Jeong S, Kim S (2005) Coupled effects in stability analysis of pile-slope systems. Computers and Geotechnics 32(4):304–315, DOI: https://doi.org/10.1016/j.compgeo.2005.02.006
Xu LD (1983) A preliminary discussion on resistance distribution when plastic deformation occurs in sliding mass in front of slope-stabilizing pile. Proceedings of the 4th Soil Mechanics and Foundation Engineering Academic Conference of China Civil Engineering Society:448–454. Beijing: China Architecture & Building Press (in Chinese)
Yan M, Shangguan SQ, Li WC, Zhu BT (2017) Numerical study of consolidation effect on the response of passive piles adjacent to surcharge load. International Journal of Geomechanics (ASCE) 17(11):04017093, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0000991
Zheng YR, Kong L (2010) Geotechnical plastic mechanics. Beijing: China Architecture & Building Press (in Chinese)
Zheng YR Zhao SY (2004) Calculation of inner force of support structure for landslide/slope by using strength reduction FEM. Chinese Journal of Rock Mechanics and Engineering 23(20):3552–3558 (in Chinese)
Zhou H, Liu HL, Ding XM, Kong GQ (2020) A p–y curve model for laterally loaded XCC pile in soft clay. Acta Geotechnica 15(11): 3229–3242, DOI: https://doi.org/10.1007/s11440-020-00944-6
Zhou CM, Shao W, Westen CJV (2014) Comparing two methods to estimate lateral force acting on stabilizing piles for a landslide in the Three Gorges Reservoir China. Engineering Geology 173:41–53, DOI: https://doi.org/10.1016/j.enggeo.2014.02.004
Acknowledgments
The authors would like to acknowledge for the financial support of the Xi’an Changqing Technology Engineering Co. Ltd, Xi’an, Shanxi, China for the research project (No. 201812012) and the Natural Science Foundation of Fujian Province (No. 2021J01600).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dai, Z., Yang, J., Dai, R. et al. Three-Dimensional and Threefold Nonlinear Numerical Modeling for Slope-Stabilizing Pile. KSCE J Civ Eng 26, 4390–4406 (2022). https://doi.org/10.1007/s12205-022-1474-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-1474-6