Abstract
Reinforced concrete (RC) structures are prone to spalling damage. Successful detection and quantification of spalling are critical to monitoring the structural safety condition. Point cloud generated by emerging surveying technologies such as photogrammetry, laser scanning and Light Detection and Ranging (LiDAR) has been growingly used for spalling damage detection. However, little is known about how to automatically extract all key properties of RC spalling from point cloud data (PCD). This paper presents a three-step computational framework to semi-automatically detect the spalling and quantify its key properties in RC columns from PCD. Specifically, it first removes noise points, calibrates the coordinate system of the captured PCD, and horizontally slices the PCD into thin layers for the spalling damaged RC columns. Secondly, the points for undamaged and damaged areas are detected by measuring the location of each point on its horizontal surface and comparing it with the boundary line of the intact column. The points for the exposed reinforcement is then detected by combining the use of boundary curve fitting and the consideration of the circular shape of vertical rebars. Thirdly, the spalling’s surface area and lost concrete volume are calculated by linear interpolation. A full-size RC column after seismic testing was selected for illustration. The findings contribute to the body of knowledge in structural inspection by introducing a new computational approach for detecting and measuring RC spalling damage. Such an automated approach may largely reduce human interventions and make damage detection and quantification more efficient for post-disaster impact assessment and large-scale building condition assessment.
Similar content being viewed by others
References
ACI (2013) Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads. ACI PRC-374.2-13, American Concrete Institute, Farmington Hills, MI, USA
ACI (2014) Building code requirements for structural concrete. ACI CODE-318-19, American Concrete Institute, Farmington Hills, MI, USA
ACI (2015) Guide to concrete floor and slab construction. ACI 302.1R-15, American Concrete Institute, Farmington Hills, MI, USA
Adhikari R, Moselhi O, Bagchi A (2014) Image-based retrieval of concrete crack properties for bridge inspection. Automation in Construction 39:180–194, DOI: https://doi.org/10.1016/j.autcon.2013.06.011
Ahmad S (2003) Reinforcement corrosion in concrete structures, its monitoring and service life prediction — A review. Cement and Concrete Composites 25(4–5):459–471, DOI: https://doi.org/10.1016/S0958-9465(02)00086-0
Akhtar S (2013) Review of nondestructive testing methods for condition monitoring of concrete structures. Journal of Construction Engineering 2013:1–11, DOI: https://doi.org/10.1155/2013/834572
Barazzetti L, Banfi F, Brumana R, Roncoroni F, Previtali M (2016) BIM from laser scans not just for buildings: NURBS-based parametric modeling ofa medieval bridge. Proceedings of XXIII ISPRS congress, July 11–18, Prague, Czech Republic, 51–56
Barazzetti L, Scaioni M (2009) Crack measurement: Development, testing and applications of an automatic image-based algorithm. ISPRS Journal of Photogrammetry and Remote Sensing 64(3):285–296, DOI: https://doi.org/10.1016/j.isprsjprs.2009.02.004
Belhaoua A, Kohler S, Hirsch E (2010) Error evaluation in a stereovision-based 3D reconstruction system. EURASIP Journal on Image and Video Processing 2010(1):539836
Bracewell RN, Bracewell RN (1986) The fourier transform and its applications. McGraw-Hill, New York, NY, USA
Brilakis I, Lourakis M, Sacks R, Savarese S, Christodoulou S, Teizer J, Makhmalbaf A (2010) Toward automated generation of parametric BIMs based on hybrid video and laser scanning data. Advanced Engineering Informatics 24(4):456–465, DOI: https://doi.org/10.1016/j.aei.2010.06.006
Cameron AC, Windmeijer FA (1997) An R-squared measure of goodness of fit for some common nonlinear regression models. Journal of Econometrics 77(2):329–342, DOI: https://doi.org/10.1016/S0304-4076(96)01818-0
Castillo EDR, Kanitkar R (2021) Effect of FRP spike anchor installation quality and concrete repair on the seismic behavior of FRP-strengthened RC columns. Journal of Composites for Construction 25(1):04020085, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0001095
Catalucci S, Marsili R, Moretti M, Rossi G (2018) Comparison between point cloud processing techniques. Measurement 127:221–226, DOI: https://doi.org/10.1016/j.measurement.2018.05.111
del Rey Castillo E, Griffith M, Ingham J (2018) Seismic behavior of RC columns flexurally strengthened with FRP sheets and FRP anchors. Composite Structurers 203:382–395, DOI: https://doi.org/10.1016/j.compstruct.2018.07.029
del Rey Castillo E, Zou Y, Liarokapis M, Yang X, Wang F, Walsh K, Wotherspoon L, Ingham J (2021) Rapid, automated, post-earthquake building assessment using a swarm of drones and machine learning techniques. Proceedings of 2021 New Zealand society for earthquake engineering (NZSEE) annual conference, April 14–16, Christchurch, New Zealand, 1–9
Dore C, Murphy M (2014) Semi-automatic generation of as-built BIM façade geometry from laser and image data. Journal of Information Technology in Construction (ITcon) 19(2):20–46
Erdélyi J, Kopáčik A, Lipták I, Kyrinovič P (2017) Automation of point cloud processing to increase the deformation monitoring accuracy. Applied Geomatics 9(2):105–113, DOI: https://doi.org/10.1007/s12518-017-0186-y
Erkal BG, Hajjar JF (2017) Laser-based surface damage detection and quantification using predicted surface properties. Automation in Construction 83:285–302, DOI: https://doi.org/10.1016/j.autcon.2017.08.004
FARO (2020) FARO laser scanner tech sheet. FARO, Retrieved 12 April 2021, https://media.faro.com/-/media/Project/FARO/FARO/FARO/Resouices/2021/01/15/22/34/Tech-Sheet-FARO-Focus-Laser-Scanners-ENGpdf?rev=cb02264ffcbd4123b82a5c42f29b14be
Fryskowska A, Stachelek J (2018) A no-reference method of geometric content quality analysis of 3D models generated from laser scanning point clouds for hBIM. Journal of Cultural Heritage 34:95–108, DOI: https://doi.org/10.1016/j.culher.2018.04.003
Fuchs P, Washer G, Chase S, Moore M (2004) Laser-based instrumentation for bridge load testing. Journal of Performance of Constructed Facilities 18(4):213–219, DOI: https://doi.org/10.1061/(ASCE)0887-3828(2004)18:4(213)
Gao H, Cheng B, Wang J, Li K, Zhao J, Li D (2018) Object classification using CNN-based fusion of vision and LIDAR in autonomous vehicle environment. IEEE Transactions on Industrial Informatics 14(9):4224–4231, DOI: https://doi.org/10.1109/TII.2018.2822828
German S, Brilakis I, DesRoches R (2012a) Comprehensive property retrieval and measurement of concrete spalling using machine vision for post-earthquake safety assessments. Proceedings of SPIE smart structures and materials + nondestructive evaluation and health monitoring, March 11–15, San Diego, CA, USA
German S, Brilakis I, DesRoches R (2012b) Rapid entropy-based detection and properties measurement of concrete spalling with machine vision for post-earthquake safety assessments. Advanced Engineering Informatics 26(4):846–858, DOI: https://doi.org/10.1016/j.aei.2012.06.005
Hashemi MJ, Al-Ogaidi Y, Al-Mahaidi R, Kalfat R, Tsang H-H, Wilson JL (2017) Application of hybrid simulation for collapse assessment of post-earthquake CFRP-repaired RC columns. Journal of Structural Engineering 143(1):04016149, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001629
Hutchinson TC, Chen Z (2006) Improved image analysis for evaluating concrete damage. Journal of Computing in Civil Engineering 20(3): 210–216, DOI: https://doi.org/10.1061/(ASCE)0887-3801(2006)20:3(210)
Hüthwohl P, Brilakis I, Borrmann A, Sacks R (2018) Integrating RC bridge defect information into BIM models. Journal of Computing in Civil Engineering (3):04018013
Ip CY, Gupta SK (2007) Retrieving matching CAD models by using partial 3D point clouds. Computer-Aided Design and Applications 4(5):629–638, DOI: https://doi.org/10.1080/16864360.2007.10738497
Kang D, Benipal SS, Gopal DL, Cha Y-J (2020) Hybrid pixel-level concrete crack segmentation and quantification across complex backgrounds using deep learning. Automation in Construction 118:103291, DOI: https://doi.org/10.1016/j.autcon.2020.103291
Kim M-K, Cheng JC, Sohn H, Chang C-C (2015a) A framework for dimensional and surface quality assessment of precast concrete elements using BIM and 3D laser scanning. Automation in Construction 49:225–238, DOI: https://doi.org/10.1016/j.autcon.2014.07.010
Kim M-K, Sohn H, Chang C-C (2015b) Localization and quantification of concrete spalling defects using terrestrial laser scanning. Journal of Computing in Civil Engineering 29(6):04014086, DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000415
Kim M-K, Wang Q, Park J-W, Cheng JC, Sohn H, Chang C-C (2016) Automated dimensional quality assurance of full-scale precast concrete elements using laser scanning and BIM. Automation in Construction 72:102–114, DOI: https://doi.org/10.1016/j.autcon.2016.08.035
Kim H, Yoon J, Sim SH (2020) Automated bridge component recognition from point clouds using deep learning. Structural Control and Health Monitoring 27(9):e2591, DOI: https://doi.org/10.1002/stc.2591
Koch C, Brilakis I (2011) Pothole detection in asphalt pavement images. Advanced Engineering Informatics 25(3):507–515, DOI: https://doi.org/10.1016/j.aei.2011.01.002
Koch C, Paal SG, Rashidi A, Zhu Z, KÖnig M, Brilakis I (2014) Achievements and challenges in machine vision-based inspection of large concrete structures. Advances in Structural Engineering 17(3): 303–318, DOI: https://doi.org/10.1260/1369-4332.17.3.303
Liu Y, Fan B, Meng G, Lu J, Xiang S, Pan C (2019) DensePoint: Learning densely contextual representation for efficient point cloud processing. Proceedings of 2019 BEEE/CVF international conference on computer vision (ICCV), October 27-November 2, Seoul, Korea, DOI: https://doi.org/10.1109/ICCV.2019.00534
Lu R, Brilakis I, Middleton CR (2019) Detection of structural components in point clouds of existing RC bridges. Computer-Aided Civil and Infrastructure Engineering 34(3):191–212, DOI: https://doi.org/10.1111/mice.12407
Ma L, Sacks R Zeibak-Shini R Aryal A, Filin S (2015) Preparation of synthetic as-damaged models for post-earthquake BIM reconstruction research. Journal of Computing in Civil Engineering 30(3):04015032, DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000500
Maeda M, Nakano Y, Lee KS (2004) Post-earthquake damage evaluation for R/C buildings based on residual seismic capacity. Proceedings of 13th world conference on earthquake engineering, August 1–6, Vancouver, Canada
Maffei J, Telleen K, Nakayama Y (2008) Probability-based seismic assessment of buildings, considering post-earthquake safety. Earthquake Spectra 24(3):667–699, DOI: https://doi.org/10.1193/1.2950066
Majorana C, Salomoni V, Mazzucco G, Khoury G (2010) An approach for modelling concrete spalling in finite strains. Mathematics and Computers in Simulation 80(8):1694–1712, DOI: https://doi.org/10.1016/j.matcom.2009.05.011
MathWorks (2021) MATLAB 2020a. Retrieved November 2, 2021, https://www.mathworks.com/
Matlab (2021) Delaunay triangulation. Retrieved October 31, 2021, https://www.mathworks.com/help/matlab/ref/delaunay.html
Minehane M, O’Donovan R Ruane K, O’Keeffe B (2014) The use of 3D laser scanning technology for bridge inspection and assessment. The civil engineering research in Ireland (CERI) conference 2014, 235–240
Mizoguchi T, Koda Y, Iwaki I, Wakabayashi H, Kobayashi Y, Shirai K, Hara Y, Lee H-S (2013) Quantitative scaling evaluation of concrete structures based on terrestrial laser scanning. Automation in Construction 35:263–274, DOI: https://doi.org/10.1016/j.autcon.2013.05.022
Mukupa W, Roberts GW, Hancock CM (2017) A review of the use of terrestrial laser scanning application for change detection and deformation monitoring of structures. Survey Review 49(353):99–116, DOI: https://doi.org/10.1080/00396265.2015.1133039
NZTA (2019) Bridges, geotechnical structures and other significant highway structures inspection policy. New Zealand Transport Agency, Wellington, New Zealand
Park HS, Lee H, Adeli H, Lee I (2007) A new approach for health monitoring of structures: Terrestrial laser scanning. Computer-Aided Civil and Infrastructure Engineering 22(1):19–30, DOI: https://doi.org/10.1111/j.1467-8667.2006.00466.x
PCA (2002) Types and causes of concrete deterioration. Portland Cement Association, Skokie, IL, USA
PointCab GmbH (2021) Pointcab origins pro. Retrieved November 1, 2021, www.pointcab-software.com
Rajan VT (1994) Optimality of the delaunay triangulation in ℝ d. Discrete & Computational Geometry 12(2):189–202
Rau J, Hsiao K, Jhan J, Wang S, Fang W, Wang J (2017) Bridge crack detection using multi-rotary UAV and object-base image analysis. The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences 42:311–318, DOI: https://doi.org/10.5194/isprsarchives-XLII-2-W6-311-2017
Rogers R (2016) Assessing pre-tensioned reinforcement corrosion within the New Zealand concrete bridge stock. PhD Thesis, The University of Auckland, Auckland, New Zealand
Sacks R, Kedar A, Borrmann A, Ma L, Brilakis I, Hüthwohl P, Daum S, Kattel U, Yosef R, Liebich T, Barutcu BE, Muhic S (2018) SeeBridge as next generation bridge inspection: Overview, information delivery manual and model view definition. Automation in Construction 90:134–145, DOI: https://doi.org/10.1016/j.autcon.2018.02.033
Shiradhonkar S, Sinha R (2014) Seismic global damage states for post- earthquake visual safety assessment of reinforced concrete buildings. Proceedings of 15th symposium on earthquake engineering (15SEE), December 11–13, Roorkee, India
Torok MM, Golparvar-Fard M, Kochersberger KB (2013) Image-based automated 3D crack detection for post-disaster building assessment. Journal of Computing in Civil Engineering 28(5):A4014004, DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000334
Truong-Hong L, Laefer DF (2014) Application of terrestrial laser scanner in bridge inspection: Review and an opportunity. Proceedings of 37th IABSE symposium, September 3–5, Madrid, Spain, 2713–2720
Wu H, Ao X, Chen Z, Liu C, Xu Z, Yu P (2019) Concrete spalling detection for metro tunnel from point cloud based on roughness descriptor. Journal of Sensors 2019, DOI: https://doi.org/10.1155/2019/8574750
Zhou Z, Gong J, Guo M (2016) Image-based 3D reconstruction for posthurricane residential building damage assessment. Journal of Computing in Civil Engineering 30(2):04015015, DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000480
Zhu Z, German S, Brilakis I (2010) Detection of large-scale concrete columns for automated bridge inspection. Automation in Construction 19(8):1047–1055, DOI: https://doi.org/10.1016/j.autcon.2010.07.016
Zhu J, Wang X, Chen M, Wu P, Kim MJ (2019) Integration of BIM and GIS: IFC geometry transformation to shapefile using enhanced open-source approach. Automation in Construction 106:102859, DOI: https://doi.org/10.1016/j.autcon.2019.102859
Acknowledgments
The authors would like to acknowledge the financial support received from the University of Auckland Faculty Research Development Fund (Project No. 3716476).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, H., Zou, Y., del Rey Castillo, E. et al. Detection of RC Spalling Damage and Quantification of Its Key Properties from 3D Point Cloud. KSCE J Civ Eng 26, 2023–2035 (2022). https://doi.org/10.1007/s12205-022-0890-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-0890-y