Abstract
In order to solve the problem of quantitative detection of corroded reinforced concrete of different sizes, the quantitative detection experiment based on spontaneous magnetic flux leakage (SMFL) was carried out in batches. Electrochemical corrosion of 27 reinforced concrete specimens was carried out, and the SMFL signals of reinforcement were obtained by magnetic detection equipment. Four-dimensional magnetic indicators M1–M4 that can characterize the corrosion degree of the specimens were defined. The influence of different sizes on the magnetic indicators were analyzed. It is concluded that the thicknesses of the concrete covers affect the magnetic indicators by affecting the lift-off heights z. The influence of diameter of the rebars on the quantitative detection can be eliminated by describing the corrosion degree with the average cross-section loss rate α. The influence of length of the rebars on quantitative detection is not clear yet. Finally, Support Vector Machine (SVM) was introduced to establish a classification model of corrosion classes and magnetic indicators. Using the model to predict the corrosion classes of the specimens can achieve a high classification accuracy. The research provides a new method for the quantitative detection of steel corrosion.
Similar content being viewed by others
References
Bao S, Jin PF, Zhao ZY, Fu ML (2020) A review of the metal magnetic memory method. Journal of Nondestructive Evaluation 39(1):11, DOI: https://doi.org/10.1007/s10921-020-0652-z
Brenna A, Beretta S, Berra M, Diamanti M, Ormellese M, Pastore T, Pedeferri M, Bolzoni F (2019) Effect of polymer modified cementitious coatings on chloride-induced corrosion of steel in concrete. Structural Concrete: Journal of the FIB 21(5):1810–1822, DOI: https://doi.org/10.1002/suco.201900255
Carvalho AA, Rebello JMA, Sagrilo LVS, Camerini CS, Miranda IVJ (2006) MFL signals and artificial neural networks applied to detection and classification of pipe weld defects. NDT and E International 39(8): 661–667, DOI: https://doi.org/10.1016/j.ndteint.2006.04.003
Coughlin CR, Clapham L, Atherton DL (2000) Effects of stress on MFL responses from elongated corrosion pits in pipeline steel. NDT and E International 33(3):181–188, DOI: https://doi.org/10.1016/S0963-8695(99)00038-9
Dubov AA (1997) A study of metal properties using the method of magnetic memory. Metal Science and Heat Treatment 39(9):401–405, DOI: https://doi.org/10.1007/bf02469065
Dubov AA (2012) Development of a metal magnetic memory method. Chemical and Petroleum Engineering 47(11):837–839, DOI: https://doi.org/10.1007/s10556-012-9559-6
Dubov AA, Kolokolnikov S (2013) The metal magnetic memory method application for online monitoring of damage development in steel pipes and welded joints specimens. Welding in the World 57(1): 123–136, DOI: https://doi.org/10.1007/s40194-012-0011-5
Ghorbanpoor A (1998) Magnetic-based NDE of steel in prestressed and post-tensioned concrete bridges. Proceedings of an NDT conference, March 31, San Antonio, TX, USA
Ilker Yelbay H, Cam I, Hakan Gür C (2010) Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique. NDT and E International 43(1):29–33, DOI: https://doi.org/10.1016/j.ndteint.2009.08.003
Karthik MM, Terzioglu T, Hurlebaus S, Hueste M, Weischedel H, Stamm R (2019) Magnetic flux leakage technique to detect loss in metallic area in external post-tensioning systems. Engineering Structures 201:109765, DOI: https://doi.org/10.1016/j.engstruct.2019.109765
Li CC, Dong LH, Wang HD, Li GL, Xu BS (2016) Metal magnetic memory technique used to predict the fatigue crack propagation behavior of 0.45%C steel. Journal of Magnetism and Magnetic Materials 405:150–157, DOI: https://doi.org/10.1016/j.jmmm.2015.12.035
Lin HW, Zhao YX, Yang JQ, Feng P, Ozbolt J, Ye HL (2019) Effects of the corrosion of main bar and stirrups on the bond behavior of reinforcing steel bar. Construction and Building Materials 225:13–28, DOI: https://doi.org/10.1016/j.conbuildmat.2019.07.156
Moorthy V, Choudhary BK, Vaidyanathan S, Jayakumar T, Bhanu Sankara Rao K, Raj B (1999) An assessment of low cycle fatigue damage using magnetic Barkhausen emission in 9Cr-1Mo ferritic steel. International Journal of Fatigue 21(3):263–269, DOI: https://doi.org/10.1016/S0142-1123(98)00079-6
Peng N, Zhang Y, Zhao Y (2013) A SVM-kNN method for quasar-star classification. Science China Physics, Mechanics and Astronomy 56(6):1227–1234, DOI: https://doi.org/10.1007/s11433-013-5083-8
Qiu JL, Zhang H, Zhou JT, Ma H, Liao L (2019) Experimental analysis of the correlation between bending strength and SMFL of corroded RC beams. Construction and Building Materials 214:594–605, DOI: https://doi.org/10.1016/j.conbuildmat.2019.04.120
Ren XH, Liu G, Zhang M, Si YS, Zhang XY, Ma L (2019) Dairy cattle’s behavior recognition method based on support vector machine classification model. Journal of Agricultural Machinery 50(S1):290–296, DOI: https://doi.org/10.6041/j.issn.1000-1298.2019.S0.045
Shen X, Niu LF, Qi ZQ, Tian YJ (2017) Support vector machine classifier with truncated pinball loss. Pattern Recognition 68:199–210, DOI: https://doi.org/10.1016/j.patcog.2017.03.011
Shi PP (2015) Analytical solutions of magnetic dipole model for defect leakage magnetic fields. Non-destructive Testing 37(3):1–7
Su SQ, Wei LX, Wang W, He Y (2019) Metal magnetic memory identification on steel structure implicit damage based on support vector machine. Journal of Xi’an University of Architecture & Technology 51(1):1–6, DOI: https://doi.org/10.15986/j.1006-7930.2019.01.001 (in Chinese)
Sun Y, Kang Y (2013) Magnetic mechanisms of magnetic flux leakage nondestructive testing. Applied Physics Letters 103(18):184104, DOI: https://doi.org/10.1063/1.4828556
Vapnik VN (1995) The nature of statistical learning theory. Springer, New York, NY, USA, 133–155
Wang ZD, Gu Y, Wang YS (2012) A review of three magnetic NDT technologies. Journal of Magnetism and Magnetic Materials 324(4): 382–388, DOI: https://doi.org/10.1016/j.jmmm.2011.08.048
Wang YJ, Melikhov Y, Meydan T, Yang ZC, Wu DH, Wu B, He CF, Liu XC (2020) Stress-dependent magnetic flux leakage: Finite element modelling simulations versus experiments. Journal of Nondestructive Evaluation 39(1):1–9, DOI: https://doi.org/10.1007/s10921-019-0643-0
Wang W, Yi S, Su S (2016) Experimental investigation of stress and damage characterization of steel beam buckling using magnetic memory signals. The Structural Design of Tall and Special Buildings 25(11):505–518, DOI: https://doi.org/10.1002/tal.1269
Xia RC, Zhou JY, Zhang H, Liao L, Zhao RQ, Zhang ZY (2018) Quantitative study on corrosion of steel strands based on self-magnetic flux leakage. Sensors 18(5):1396, DOI: https://doi.org/10.3390/s18051396
Xiong C, Zeng CQ, Li YR, Li LY, Li P, Li DW (2019) The constitutive relationship for corroded steel bars: Model and analysis. Materials 12(24):4058, DOI: https://doi.org/10.3390/ma12244058
Xu K, Wang XF, Kong CF, Feng RY, Liu G, Wu CL (2019) Identification of hydrothermal alteration minerals for exploring gold deposits based on SVM and PCA using ASTER data: A case study of Gulong. Remote Sensing 11(24):3003, DOI: https://doi.org/10.3390/rs11243003
Yang BH, Han ZJ, Zan P, Wang Q (2014) New KF-PP-SVM classification method for EEG in brain-computer interfaces. Bio-Medical Materials and Engineering 24(6):3665–3673, DOI: https://doi.org/10.3233/BME-141194
Yang D, Qiu JL, Di HB, Zhao SY, Zhou JT, Yang FX (2019) Quantitative evaluation of corrosion degrees of steel bars based on self-magnetic flux leakage. Metals 9(9):952, DOI: https://doi.org/10.3390/met9090952
Yang XW, Yu QZ, He LF, Guo TJ (2013) The one-against-all partition based binary tree support vector machine algorithms for multi-class classification. Neurocomputing 113:1–7, DOI: https://doi.org/10.1016/j.neucom.2012.12.048
Acknowledgments
This work was supported by the National Natural Science Foundation of China (51808081), the Chongqing Natural Science Foundation of China (cstc2020jcyj-jqX0006, cstc2019jcyj-cxttX0004, cstc2019jcyj-msxmX0556), Science and Technology Research Project of Chongqing Education Commission (KJQN202001211, KJQN202001208), Graduate Research and Innovation Project of Chongqing Jiaotong University (2020B0003), Scientific Research Project of Chongqing Three Gorges College (19QN11).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, M., Zhou, J., Zhao, Q. et al. Quantitative Detection of Corroded Reinforced Concrete of Different Sizes Based on SMFL. KSCE J Civ Eng 26, 143–154 (2022). https://doi.org/10.1007/s12205-021-2026-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-2026-1